- Foundation
- About 16 min
- 5 practice questions
Domestic electric circuits and safety
Describe how electricity is supplied and distributed in a home, explain the live, neutral and earth wires, and explain how fuses protect against overloading and short-circuiting.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the supply to a house: live, neutral and earth wires, 220 V and 50 Hz AC.
- Explain why appliances are connected in parallel and why metal appliances are earthed.
- Explain overloading and short-circuiting, and how a fuse protects a circuit.
The same physics you have learnt about current, resistance, heating and magnetism comes together in the wiring of a home. Knowing how it works helps you use electricity safely. Never open switchboards or work on mains wiring yourself; that is a job for a qualified electrician.
The supply to a house
In India, homes receive alternating current (AC) at a potential difference of 220 V with a frequency of 50 Hz. The supply comes through overhead wires or underground cables. In the colour code described in your textbook, one wire, the live wire, has red insulation and the other, the neutral wire, has black insulation; the potential difference between them is 220 V. A third wire, the earth wire, has green insulation.
From the pole to the appliance
- Mains supply Live and neutral wires reach the house.
- Main fuse Protects the whole house wiring.
- Electricity meter Measures the energy used in kW h.
- Main switch and distribution box Splits the supply into separate circuits.
- Separate circuits For example 15 A for heavy appliances, 5 A for bulbs and fans.
- Appliances Each connected in parallel with its own switch.
Usually there are two kinds of circuit: one of 15 A rating for high-power appliances such as geysers and air coolers, and one of 5 A rating for bulbs, fans and similar devices. Within each circuit, appliances are connected in parallel between the live and neutral wires, so each gets the same 220 V and can be switched on or off independently.
The earth wire
The earth wire is connected to a metal plate buried deep in the ground near the house. Appliances with metal bodies, such as electric irons, toasters and refrigerators, have their bodies connected to the earth wire. If the live wire accidentally touches the metal body, the leaked current flows through the low-resistance earth wire into the ground instead of through a person. The body stays at the earth's potential, so a user does not get a severe shock.
Live (red), neutral (black) and earth (green): 220 V AC at 50 Hz between live and neutral; the earth wire is a safety path that keeps metal bodies of appliances at earth potential.
Overloading and short-circuiting
Two dangers in a household circuit
-
Overloading
- Too many appliances on one socket or circuit
- Or a sudden rise in supply voltage
- Total current exceeds the safe rating
- Wires overheat and may catch fire
-
Short-circuiting
- Live and neutral wires touch directly
- Usually when insulation is damaged or an appliance is faulty
- Resistance becomes very small
- Current rises abruptly to a very large value
The fuse is the most important safety device. It is connected in series in the live wire. When the current exceeds its rating, the Joule heating melts the fuse wire and breaks the circuit, protecting appliances and wiring. Many homes now also use miniature circuit breakers (MCBs), which switch off automatically and can be reset. Never replace a fuse wire with a thicker wire or a plain copper wire: it would not melt when it should.
Worked example 1: is it safe to plug in a heater?
A 1.5 kW room heater is plugged into a 5 A circuit at 220 V. Working: I = P ÷ V = 1500 ÷ 220 ≈ 6.8 A. This is more than the 5 A rating, so the circuit would be overloaded and the fuse should blow. The heater should be used on a 15 A circuit.
Worked example 2: adding up a circuit's load
A 5 A circuit in a room supplies three 100 W bulbs and two 75 W fans. Working: total power = 3 × 100 + 2 × 75 = 300 + 150 = 450 W. Current = 450 ÷ 220 ≈ 2.0 A, which is safe. If a 1000 W iron is also plugged in, the total becomes 1450 W and I = 1450 ÷ 220 ≈ 6.6 A, above 5 A: the fuse would blow, warning of overloading.
Key takeaways: homes in India receive 220 V AC at 50 Hz through live and neutral wires, with an earth wire for safety. The supply passes through a main fuse, a meter and a distribution box into separate 15 A and 5 A circuits, with appliances in parallel. Earthing protects users from shocks by metal-bodied appliances. Overloading and short-circuiting cause dangerously large currents; a fuse in series melts and breaks the circuit.
Check your understanding
-
1. What is the potential difference between the live and neutral wires of the domestic supply in India?
- 110 V
- 50 V
- 440 V
- 220 V
Show answer
Answer: D. Homes in India receive AC at 220 V (with a frequency of 50 Hz) between the live and neutral wires.
-
2. The main purpose of the earth wire is to
- carry the current that runs the appliance
- provide a safe, low-resistance path for leaking current so that the user does not get a severe shock
- reduce the electricity bill
- increase the voltage to appliances
Show answer
Answer: B. If the live wire touches a metal body, the earth wire carries the leaked current to the ground and keeps the body at earth potential, protecting the user.
-
3. At the time of a short circuit, the current in the circuit
- increases sharply
- decreases sharply
- stays the same
- becomes zero at once
Show answer
Answer: A. When live and neutral touch directly, the resistance of the path becomes very small, so the current rises abruptly to a very large value.
-
4. A 2 kW electric heater is used on a 220 V supply. Which circuit should it be connected to?
- A 5 A circuit, because it draws about 4 A
- A 15 A circuit, because it draws about 9 A
- Any circuit, because current does not matter
- A 1 A circuit
Show answer
Answer: B. I = P ÷ V = 2000 ÷ 220 ≈ 9.1 A. That is more than 5 A, so it needs the 15 A circuit meant for high-power appliances.
-
5. Assertion (A): Domestic appliances are connected in parallel.
Reason (R): In a parallel connection every appliance gets the full supply voltage and can be switched independently.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true, and these advantages are exactly why homes are wired in parallel; R explains A.
Sign in to keep track of the lessons you finish.