• Foundation
  • About 16 min
  • 5 practice questions

Field of a circular loop, a solenoid and electromagnets

Describe the magnetic field of a circular loop and of a solenoid, find which end of a coil acts as a north pole, and explain how an electromagnet is made and strengthened.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the field of a current-carrying circular loop and explain why more turns give a stronger field.
  • Describe the field of a solenoid and compare it with a bar magnet.
  • Explain how an electromagnet is made and what makes it stronger.

A straight wire gives a fairly weak field. Bend the same wire into a loop, or wind it into a long coil, and the fields from different parts of the wire add up. This is how strong magnets are made from electric current, and it is the basis of electromagnets used in cranes, bells and many machines.

A circular loop

Think of a circular loop as a straight wire bent round. Near any part of the wire, the field lines are small circles around the wire. As we move towards the centre of the loop, the circles from all parts of the loop become larger and, at the centre, look like straight lines perpendicular to the plane of the loop. Every part of the loop makes the field at the centre point in the same direction, so their effects add.

If a coil has n turns, each turn adds its own field, so the field is n times as large as that of a single turn. The field of a loop is also larger for a larger current.

A solenoid

A solenoid is a coil of many circular turns of insulated copper wire wound closely in the shape of a long cylinder. When current flows, its field pattern is very like that of a bar magnet: one end behaves as a north pole and the other as a south pole. Inside the solenoid the field lines are parallel straight lines, which means the field is uniform: the same in strength and direction at all points inside.

Solenoid and bar magnet

  • Current-carrying solenoid
    • Field pattern outside like a bar magnet
    • Uniform field inside
    • Poles reverse if the current reverses
    • Field disappears when the current is switched off
  • Bar magnet
    • Field pattern outside from N to S
    • Field inside runs S to N
    • Poles are fixed
    • Magnetism is permanent

Looking at one end of a coil: if the current flows anticlockwise, that end is a north pole; if it flows clockwise, that end is a south pole.

Worked example 1: finding the poles of a coil

You look at the left end of a solenoid and see the current going round clockwise. Which pole is the left end? Working: by the right-hand thumb rule applied to the loop, a clockwise current seen by you makes the field at the centre point away from you, into the coil. Field lines enter a coil at its south pole, so the left end is a south pole. The right end, where the lines come out, is the north pole.

Worked example 2: comparing coils

Coil A has 50 turns and carries 2 A. Coil B is the same size, with 100 turns carrying 1 A. Which has the stronger field at its centre? Working: the field is proportional to both the number of turns and the current. For A: 50 × 2 = 100 'turn-amperes'. For B: 100 × 1 = 100. The fields are equal. Doubling the turns has the same effect as doubling the current.

Electromagnets

The strong, uniform field inside a solenoid can magnetise a piece of magnetic material such as soft iron placed inside it. A soft iron core wrapped in a coil of insulated copper wire is an electromagnet. It behaves as a strong magnet only while the current flows, and its poles can be reversed by reversing the current.

Making an electromagnet stronger

  1. More current A larger current gives a stronger field.
  2. More turns Each turn adds to the field.
  3. Soft iron core The core becomes strongly magnetised while the current flows.
  4. Switch off Soft iron loses most of its magnetism when the current stops.

A permanent magnet, by contrast, keeps its magnetism; steel is used for permanent magnets because, once magnetised, it stays magnetised. Electromagnets are used where magnetism must be switched on and off, for example in cranes that lift scrap iron, electric bells and relays.

Key takeaways: at the centre of a current loop the field lines are straight and perpendicular to the loop, and n turns give n times the field. A solenoid's field is like a bar magnet's outside and uniform inside. Anticlockwise current seen at an end makes that end north; clockwise makes it south. An electromagnet is a soft iron core in a coil; it is stronger with more current and more turns, and works only while current flows.

Check your understanding

  1. 1. The magnetic field inside a long current-carrying solenoid is

    1. zero
    2. strongest at the walls only
    3. uniform
    4. in the form of concentric circles
    Show answer

    Answer: C. Inside a long solenoid the field lines are parallel straight lines, which means the field has the same strength and direction everywhere inside: it is uniform.

  2. 2. How does the field at the centre of a circular coil change if the number of turns is tripled and the current is unchanged?

    1. It becomes three times as strong
    2. It becomes one third
    3. It becomes nine times as strong
    4. It does not change
    Show answer

    Answer: A. Each turn contributes the same field in the same direction at the centre, so the field is proportional to the number of turns: 3 times the turns gives 3 times the field.

  3. 3. Looking at one end of a solenoid, you see the current flowing anticlockwise. That end behaves as

    1. a south pole
    2. a north pole
    3. neither pole
    4. both poles together
    Show answer

    Answer: B. An anticlockwise current seen at an end makes the field there point towards you, out of the coil. Field lines leave from a north pole, so that end is north.

  4. 4. Which material is used for the core of an electromagnet that must lose its magnetism when the current is switched off?

    1. Steel
    2. Copper
    3. Plastic
    4. Soft iron
    Show answer

    Answer: D. Soft iron becomes strongly magnetised inside the coil but loses most of its magnetism when the current stops. Steel keeps its magnetism and is used for permanent magnets.

  5. 5. Which change will NOT make an electromagnet stronger?

    1. Increasing the current
    2. Increasing the number of turns
    3. Reversing the direction of the current
    4. Putting a soft iron core inside the coil
    Show answer

    Answer: C. Reversing the current only swaps the north and south poles; the strength stays the same. More current, more turns and a soft iron core all increase the strength.

Privacy · Terms · Refunds · Delivery