- Foundation
- About 18 min
- 5 practice questions
Salts: pH, common salt and useful salts
Group salts into families, predict the pH of a salt from its parent acid and base, and describe how sodium hydroxide, bleaching powder, baking soda, washing soda and Plaster of Paris are made and used.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name the parent acid and base of a salt and predict whether its solution is acidic, basic or neutral.
- Describe the chlor-alkali process and the making and uses of bleaching powder, baking soda and washing soda.
- Explain water of crystallisation and the setting of Plaster of Paris.
A salt is formed when an acid reacts with a base. Salts are everywhere: in our food, in bread and cakes, in washing powders, in plaster for broken bones and in clean drinking water. This lesson looks at how salts are grouped and at a few very useful ones made from common salt.
Families of salts
Salts that share the same positive ion (or the same negative ion) belong to one family. NaCl and Na₂SO₄ are both sodium salts; NaCl and KCl are both chloride salts. Every salt has a parent acid and a parent base: sodium sulphate comes from sulphuric acid and sodium hydroxide; ammonium chloride comes from hydrochloric acid and ammonium hydroxide.
pH of salt solutions
Strong acid + strong base gives a neutral salt (pH 7). Strong acid + weak base gives an acidic salt (pH below 7). Weak acid + strong base gives a basic salt (pH above 7).
Worked example 1: predicting the pH of salts
| Salt | Parent acid | Parent base | Solution |
|---|---|---|---|
| Sodium chloride, NaCl | HCl (strong) | NaOH (strong) | Neutral, pH 7 |
| Ammonium chloride, NH₄Cl | HCl (strong) | NH₄OH (weak) | Acidic, pH below 7 |
| Sodium carbonate, Na₂CO₃ | H₂CO₃ (weak) | NaOH (strong) | Basic, pH above 7 |
| Sodium acetate, CH₃COONa | CH₃COOH (weak) | NaOH (strong) | Basic, pH above 7 |
| Potassium nitrate, KNO₃ | HNO₃ (strong) | KOH (strong) | Neutral, pH 7 |
Common salt and the chlor-alkali process
Sodium chloride is obtained from seawater and from rock salt, large brownish crystals mined from beds left behind when ancient seas dried up. Salt was also a symbol of India's freedom struggle in Mahatma Gandhi's Dandi March. Common salt is the raw material for many chemicals.
When electricity is passed through brine (a solution of sodium chloride in water), it decomposes: 2NaCl(aq) + 2H₂O(l) → 2NaOH(aq) + Cl₂(g) + H₂(g). This is the chlor-alkali process, named after its products, chlorine and an alkali. Chlorine is given off at the anode, hydrogen at the cathode, and sodium hydroxide solution forms near the cathode. All three products are useful, for example sodium hydroxide for soaps and paper, chlorine for disinfecting water and making PVC, and hydrogen as a fuel and for making ammonia.
Chemicals from common salt
-
Sodium hydroxide, NaOH
- Chlor-alkali process
- Soaps, detergents, paper
-
Bleaching powder, Ca(ClO)₂
- Chlorine + dry slaked lime
- Bleaching cloth and paper pulp; disinfecting water
-
Baking soda, NaHCO₃
- Made with NaCl, water, CO₂ and ammonia
- Baking powder, antacids, soda-acid fire extinguishers
-
Washing soda, Na₂CO₃·10H₂O
- Heat baking soda, then recrystallise sodium carbonate
- Glass, soap and paper industries; removing permanent hardness of water
Bleaching powder
Chlorine reacts with dry slaked lime: 2Ca(OH)₂ + 2Cl₂ → Ca(ClO)₂ + CaCl₂ + 2H₂O. Bleaching powder is written as Ca(ClO)₂, though its real make-up is more complex. It bleaches cotton, linen, wood pulp and washed clothes, acts as an oxidising agent in industry, and makes drinking water free from germs.
Baking soda and washing soda
Baking soda is sodium hydrogencarbonate, NaHCO₃: NaCl + H₂O + CO₂ + NH₃ → NH₄Cl + NaHCO₃. It is a mild, non-corrosive basic salt. On heating it gives carbon dioxide: 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂. Baking powder is baking soda mixed with tartaric acid, a weak edible acid; with water or heat it releases CO₂, which makes cakes and bread rise and become soft and spongy. The acid also stops the bitter taste of sodium carbonate being left behind.
Washing soda, Na₂CO₃·10H₂O, is made by recrystallising the sodium carbonate obtained by heating baking soda: Na₂CO₃ + 10H₂O → Na₂CO₃·10H₂O. It is also a basic salt, used in the glass, soap and paper industries, to make borax, for cleaning at home and for removing permanent hardness of water.
Water of crystallisation and Plaster of Paris
Blue copper sulphate crystals look dry, yet heating them gives water droplets in the test tube and leaves a white powder. Adding a few drops of water brings the blue colour back. The fixed number of water molecules in one formula unit of a salt is its water of crystallisation: CuSO₄·5H₂O has five. The '10H₂O' in washing soda is also water of crystallisation; the crystals are not wet.
Gypsum is CaSO₄·2H₂O. Heated to 373 K it loses some water to become calcium sulphate hemihydrate, CaSO₄·½H₂O, called Plaster of Paris. 'Half' a water molecule means two formula units of CaSO₄ share one water molecule. Mixed with water it sets back into hard gypsum: CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O. It is used to support fractured bones, to make toys and decorative items, and to make surfaces smooth. It must be stored in a moisture-proof container, or it will set in the bag.
Worked example 2: counting water of crystallisation
How many water molecules are present in 2 formula units of washing soda? Each Na₂CO₃·10H₂O has 10, so 2 × 10 = 20 water molecules. In 2 formula units of Plaster of Paris there are 2 × ½ = 1 water molecule.
Key takeaways: a salt's pH depends on the strength of its parent acid and base. The chlor-alkali process turns brine into NaOH, Cl₂ and H₂. Bleaching powder (from chlorine and slaked lime) bleaches and disinfects; baking soda raises cakes and neutralises acid; washing soda cleans and softens hard water. Water of crystallisation is part of a crystal's formula; Plaster of Paris sets to gypsum when mixed with water.
Check your understanding
-
1. Which salt gives an acidic solution in water?
- Sodium chloride
- Sodium carbonate
- Ammonium chloride
- Sodium acetate
Show answer
Answer: C. Ammonium chloride comes from a strong acid (HCl) and a weak base (NH₄OH), so its solution is acidic. NaCl is neutral; sodium carbonate and sodium acetate are basic.
-
2. In the chlor-alkali process, which gas is given off at the anode?
- Chlorine
- Hydrogen
- Oxygen
- Carbon dioxide
Show answer
Answer: A. 2NaCl + 2H₂O → 2NaOH + Cl₂ + H₂. Chlorine is released at the anode, hydrogen at the cathode, and NaOH forms near the cathode.
-
3. Which compound is used for removing permanent hardness of water?
- Baking soda
- Bleaching powder
- Plaster of Paris
- Washing soda
Show answer
Answer: D. Washing soda, sodium carbonate decahydrate (Na₂CO₃·10H₂O), removes permanent hardness of water.
-
4. What happens when Plaster of Paris is mixed with water?
- It gives off chlorine
- It sets into a hard mass of gypsum
- It turns blue
- It dissolves completely and stays liquid
Show answer
Answer: B. CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O. Plaster of Paris takes up water and forms gypsum, a hard solid.
-
5. Blue copper sulphate crystals turn white on heating because:
- They lose their water of crystallisation
- They react with oxygen
- They melt
- They form copper metal
Show answer
Answer: A. CuSO₄·5H₂O loses its five molecules of water of crystallisation on heating and becomes white anhydrous CuSO₄. Adding water brings back the blue colour.
Sign in to keep track of the lessons you finish.