• Foundation
  • About 14 min
  • 5 practice questions

What all acids and all bases have in common

Explain acidic and basic behaviour in terms of H⁺ (hydronium) and OH⁻ ions, why acid solutions conduct electricity, what alkalis are, and how to dilute an acid safely.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why acids show their properties only when water is present.
  • Write the ions formed when an acid or a base dissolves in water, and the ionic form of neutralisation.
  • State the safe way to dilute a concentrated acid and what dilution does to ion concentration.

Hydrochloric acid, sulphuric acid and acetic acid behave alike, and so do sodium hydroxide and calcium hydroxide. Glucose and alcohol also contain hydrogen, yet they are not acids. What is the common feature? The answer lies in the ions formed in water.

Acids give hydrogen ions in water

Fix two nails in a cork, connect them through a bulb and a switch to a 6 volt battery, and dip them in dilute HCl. The bulb glows, because the solution contains ions that carry the current. The same test with glucose solution or alcohol leaves the bulb dark: they do not form ions.

An acid in water releases hydrogen ions, H⁺(aq). For example HCl gives H⁺ and Cl⁻, HNO₃ gives H⁺ and NO₃⁻, H₂SO₄ gives H⁺ and SO₄²⁻, and CH₃COOH gives H⁺ and CH₃COO⁻. A hydrogen ion cannot exist alone; it joins a water molecule to form the hydronium ion: H⁺ + H₂O → H₃O⁺. So hydrogen ions are written as H⁺(aq) or H₃O⁺.

Water is essential. Dry hydrogen chloride gas does not change the colour of dry blue litmus, but it turns moist blue litmus red, because H⁺ ions form only in the presence of water.

Bases give hydroxide ions in water

NaOH(s) → Na⁺(aq) + OH⁻(aq) in water; KOH gives K⁺ and OH⁻; Mg(OH)₂ gives Mg²⁺ and 2OH⁻. Bases produce hydroxide ions, OH⁻(aq). Bases that dissolve in water are called alkalis. Alkalis are soapy to touch, bitter and corrosive; never taste or touch them.

Acids, bases and alkalis

  • Acid
    • Gives H⁺(aq), shown as H₃O⁺, in water
    • Examples: HCl, HNO₃, H₂SO₄, CH₃COOH
  • Base
    • Gives OH⁻(aq) in water
    • Example of a base insoluble in water: copper(II) oxide
  • Alkali
    • A base that dissolves in water
    • Examples: NaOH, KOH, Ca(OH)₂
Every alkali is a base, but not every base is an alkali.

Neutralisation in terms of ions

If acids give H⁺ and bases give OH⁻, neutralisation is simply these two ions joining to form water. The other ions form the salt.

Acid + Base → Salt + Water. In ions: H⁺(aq) + OH⁻(aq) → H₂O(l).

Worked example 1: potassium hydroxide and nitric acid

Ions present: KOH gives K⁺ and OH⁻; HNO₃ gives H⁺ and NO₃⁻. What joins: H⁺ + OH⁻ → H₂O. What is left: K⁺ and NO₃⁻, the salt potassium nitrate. Full equation: KOH(aq) + HNO₃(aq) → KNO₃(aq) + H₂O(l).

Diluting acids and bases safely

Dissolving a concentrated acid or base in water is highly exothermic. The safe rule is to add the acid slowly to water, with constant stirring. If water is added to a concentrated acid, the heat produced can make the mixture boil and splash out, causing burns, and the glass may crack from local heating. Containers of concentrated acids and of sodium hydroxide carry a 'corrosive' warning sign.

Mixing an acid or base with water spreads the same ions through a larger volume, so the concentration of H₃O⁺ or OH⁻ ions per unit volume decreases. This is dilution.

Worked example 2: why does the bulb glow?

Two beakers hold dilute HCl and dilute glucose solution. HCl: in water it forms H⁺(aq) and Cl⁻(aq), moving charged particles that carry current, so the bulb glows. Glucose: it dissolves as whole molecules with no charge, so no current flows and the bulb stays off. Conclusion: containing hydrogen is not enough; an acid must release H⁺ ions in water.

Ions in different situations
SituationWhat happens to the ions
HCl gas, perfectly dryNo H⁺ ions; no acidic behaviour
HCl dissolved in waterH⁺(aq) and Cl⁻(aq) form; acidic, conducts
Acid solution diluted with more waterH₃O⁺ per unit volume decreases
More NaOH dissolved in NaOH solutionOH⁻ per unit volume increases

Key takeaways: acids give H⁺(aq) (H₃O⁺) and bases give OH⁻(aq) in water; that is why their solutions conduct electricity. Alkalis are water-soluble bases. Neutralisation is H⁺ + OH⁻ → H₂O. Always add acid to water slowly while stirring; dilution lowers the ion concentration.

Check your understanding

  1. 1. Why does dry HCl gas not change the colour of dry blue litmus paper?

    1. HCl gas is a base
    2. Without water, HCl does not form H⁺ ions
    3. Litmus works only with liquids at high temperature
    4. HCl gas is neutral
    Show answer

    Answer: B. Hydrogen ions are produced from HCl only in the presence of water (HCl + H₂O → H₃O⁺ + Cl⁻). Dry gas on dry paper forms no H⁺, so no colour change.

  2. 2. Which of these is an alkali?

    1. Copper(II) oxide
    2. Glucose
    3. Potassium hydroxide
    4. Hydrochloric acid
    Show answer

    Answer: C. An alkali is a base that dissolves in water. KOH is soluble and gives OH⁻ ions. Copper(II) oxide is a base but does not dissolve in water; glucose is neutral; HCl is an acid.

  3. 3. While diluting concentrated sulphuric acid, the correct method is to:

    1. Add the acid slowly to water with constant stirring
    2. Add water quickly to the acid
    3. Add water to the acid and heat it
    4. Mix equal amounts at once without stirring
    Show answer

    Answer: A. The process is highly exothermic. Adding acid slowly to a large amount of water while stirring spreads the heat; adding water to acid can make it boil and splash.

  4. 4. What happens to the concentration of hydronium ions when an acid solution is diluted?

    1. It increases
    2. It stays the same
    3. It becomes zero
    4. It decreases
    Show answer

    Answer: D. The same number of H₃O⁺ ions is spread through a larger volume, so the number per unit volume (concentration) decreases.

  5. 5. Which ionic equation represents every neutralisation of a strong acid by an alkali?

    1. Na⁺ + Cl⁻ → NaCl
    2. H⁺ + OH⁻ → H₂O
    3. H₂O → H⁺ + OH⁻
    4. H⁺ + H₂O → H₂ + O
    Show answer

    Answer: B. The acid supplies H⁺ and the alkali supplies OH⁻; they combine to form water. The remaining ions make up the salt.

Sign in to keep track of the lessons you finish.

Next lesson → The pH scale and why pH matters

Privacy · Terms · Refunds · Delivery