• Foundation
  • About 16 min
  • 5 practice questions

Images formed by concave and convex mirrors

Predict the position, size and nature of the image formed by a concave mirror for six object positions and by a convex mirror, using ray diagrams, and match each mirror to its everyday uses.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Locate the image formed by a concave mirror for six positions of the object.
  • Describe the image formed by a convex mirror for any object position.
  • Explain everyday uses of concave and convex mirrors from the images they form.

A shaving mirror makes your face look bigger, while the mirror on a scooter shows a smaller picture of the whole road behind. Both are spherical mirrors; the difference lies in the type of mirror and where the object is. In this lesson you will use the standard rays from Lesson 1 to predict exactly what image appears.

Real and virtual images

A real image is formed where reflected rays actually meet. It can be caught on a screen and is always inverted for a single mirror. A virtual image is formed where reflected rays only appear to meet when traced backwards. It cannot be caught on a screen and is erect. Your image in a plane mirror is virtual.

Concave mirror: six positions of the object

Move an object (say a lit candle) from very far away towards a concave mirror. The image changes in a regular way. Remember the order of points on the axis: infinity, then C, then F, then the pole P.

Image formation by a concave mirror
Position of objectPosition of imageSize of imageNature
At infinityAt FHighly diminished, point-sizedReal and inverted
Beyond CBetween F and CDiminishedReal and inverted
At CAt CSame sizeReal and inverted
Between C and FBeyond CEnlargedReal and inverted
At FAt infinityHighly enlargedReal and inverted
Between P and FBehind the mirrorEnlargedVirtual and erect

Bringing an object closer to a concave mirror

  1. Far beyond C Small real image near F
  2. At C Real image at C, same size
  3. Between C and F Real image beyond C, larger
  4. At F Rays leave parallel; image at infinity
  5. Inside F Virtual, erect, enlarged image behind the mirror
As the object moves in, the real image moves out and grows, until it flips to a virtual image.

Worked example 1: reading a ray diagram

An object stands between C and F of a concave mirror. Draw ray 1 parallel to the axis: after reflection it passes through F. Draw ray 2 through F: after reflection it travels parallel to the axis. These two reflected rays cross below the axis at a point beyond C. So the image is beyond C, real, inverted and larger than the object, which matches row 4 of the table.

Worked example 2: why a dentist uses a concave mirror

A dentist holds a small concave mirror a short distance from a tooth, closer than the focus. From row 6, an object between P and F gives a virtual, erect and enlarged image. The dentist therefore sees a large, upright view of the tooth. If the mirror were held too far away, beyond F, the image would turn inverted, which is no help.

Convex mirror

For a convex mirror the focus and centre of curvature are behind the mirror. Wherever the object is placed in front, the reflected rays spread out and only appear to come from a point behind the mirror.

Image formation by a convex mirror
Position of objectPosition of imageSize of imageNature
At infinityAt F, behind the mirrorHighly diminished, point-sizedVirtual and erect
Between infinity and the poleBetween P and F, behind the mirrorDiminishedVirtual and erect

A convex mirror always forms a virtual, erect and diminished image; a concave mirror forms a virtual, erect, enlarged image only when the object is between its pole and focus.

Uses of spherical mirrors

Where each mirror is used

  • Concave mirror
    • Torches, vehicle headlights and searchlights: a bulb at F gives a strong parallel beam
    • Shaving and make-up mirrors: enlarged, erect view of the face
    • Dentists' mirrors
    • Solar cookers and furnaces: sunlight is concentrated at F
  • Convex mirror
    • Rear-view (wing) mirrors of vehicles
    • Image is always erect
    • Image is smaller, so a much wider field of view fits in the mirror
    • Mirrors at blind turns on hill roads

Key takeaways: a real image can be caught on a screen and is inverted; a virtual image cannot and is erect. For a concave mirror, the image is real for every object position beyond F, gets larger as the object approaches F, and becomes virtual and enlarged inside F. A convex mirror always gives a virtual, erect, diminished image, which is why it gives drivers a wide view.

Check your understanding

  1. 1. An object is placed at the centre of curvature of a concave mirror. The image is

    1. at F, diminished and real
    2. at C, same size, real and inverted
    3. beyond C, enlarged and real
    4. behind the mirror, virtual and erect
    Show answer

    Answer: B. With the object at C, the reflected rays meet at C itself. The image is the same size as the object, real and inverted.

  2. 2. A concave mirror gives a virtual, erect and enlarged image. Where is the object?

    1. Beyond C
    2. At C
    3. At F
    4. Between the pole and F
    Show answer

    Answer: D. A concave mirror forms a virtual, erect, enlarged image only when the object is between the pole and the principal focus; for every other position the image is real.

  3. 3. Why are convex mirrors fitted as rear-view mirrors on vehicles?

    1. They give an erect image and a wider field of view
    2. They give an enlarged image of vehicles behind
    3. They give a real image that can be focussed
    4. They make light converge at the driver's eyes
    Show answer

    Answer: A. A convex mirror always gives an erect, diminished image, so a large stretch of road fits in a small mirror while vehicles still look the right way up.

  4. 4. To get a strong parallel beam of light from a torch, the bulb should be placed

    1. at the centre of curvature of a concave mirror
    2. between the pole and focus of a convex mirror
    3. at the principal focus of a concave mirror
    4. beyond the centre of curvature of a concave mirror
    Show answer

    Answer: C. Rays through the principal focus of a concave mirror reflect parallel to the principal axis, so a bulb at F produces a parallel beam.

  5. 5. An object is moved from beyond C towards F of a concave mirror. What happens to the image?

    1. It moves towards the mirror and becomes smaller
    2. It moves away from the mirror and becomes larger
    3. It stays at F and stays the same size
    4. It becomes virtual at once
    Show answer

    Answer: B. With the object beyond C the image is between F and C and diminished; at C it is at C and the same size; between C and F it is beyond C and enlarged. So the image moves away from the mirror and grows.

Privacy · Terms · Refunds · Delivery