• Foundation
  • About 15 min
  • 5 practice questions

Reflection of light and the parts of a spherical mirror

State the laws of reflection, name every part of a concave and a convex mirror, use R = 2f, and draw the four standard rays used in mirror ray diagrams.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the two laws of reflection and apply them to plane and curved mirrors.
  • Name the pole, centre of curvature, radius of curvature, principal axis, principal focus, focal length and aperture of a spherical mirror.
  • Use R = 2f and draw the four standard rays that locate an image.

Light lets us see the world, and most of what we see reaches our eyes after bouncing off objects. A highly polished surface such as a mirror sends light back in a very regular way. This chapter studies how mirrors and lenses change the path of light, using the simple idea that light travels in straight lines. This first lesson sets up the words and the rules we will use in every later lesson.

The laws of reflection

When a ray of light strikes a mirror, the ray arriving is the incident ray, the ray going back is the reflected ray, and the line drawn at 90° to the mirror at the point where the ray strikes is the normal. The angle between the incident ray and the normal is the angle of incidence (i); the angle between the reflected ray and the normal is the angle of reflection (r).

  1. The angle of incidence is equal to the angle of reflection (i = r).
  2. The incident ray, the normal at the point of incidence and the reflected ray all lie in the same plane.

These two laws hold for every reflecting surface, flat or curved. For a curved mirror, the normal at any point is the line joining that point to the centre of the sphere of which the mirror is a part. A plane mirror forms an image that is virtual, erect, the same size as the object, as far behind the mirror as the object is in front, and laterally inverted (left and right are swapped).

Spherical mirrors

A spherical mirror is a piece cut from a hollow glass sphere, silvered on one side. If the reflecting surface curves inwards, like the inside of a steel spoon, it is a concave mirror. If it bulges outwards, like the back of the spoon, it is a convex mirror.

Concave and convex mirrors

  • Concave mirror
    • Reflecting surface curves inwards
    • Parallel rays converge to a real focus in front
    • Called a converging mirror
    • Can form real or virtual images
  • Convex mirror
    • Reflecting surface bulges outwards
    • Parallel rays diverge and seem to come from a focus behind
    • Called a diverging mirror
    • Always forms a virtual, erect, smaller image

Words you must know

Parts of a spherical mirror
TermMeaning
Pole (P)The centre of the reflecting surface of the mirror
Centre of curvature (C)The centre of the sphere of which the mirror is a part; in front of a concave mirror, behind a convex mirror
Radius of curvature (R)The radius of that sphere, i.e. the distance PC
Principal axisThe straight line through the pole and the centre of curvature
Principal focus (F)The point where rays parallel to the principal axis meet after reflection (concave), or appear to come from (convex)
Focal length (f)The distance PF between the pole and the principal focus
ApertureThe diameter of the reflecting surface

For mirrors whose aperture is small compared with the radius of curvature, the focus lies exactly halfway between the pole and the centre of curvature.

R = 2f: the radius of curvature of a spherical mirror is twice its focal length.

Worked example 1: focal length from radius

A concave mirror is cut from a sphere of radius 36 cm. Find its focal length. Working: R = 36 cm, so f = R ÷ 2 = 36 ÷ 2 = 18 cm. The focus lies 18 cm in front of the pole and the centre of curvature 36 cm in front.

Worked example 2: angle of reflection

A ray strikes a plane mirror making an angle of 25° with the mirror surface. Find the angle of reflection. Working: the angles in the laws are measured from the normal, not the surface. The normal is at 90° to the surface, so i = 90° − 25° = 65°. By the first law, r = i = 65°. The angle between the incident and reflected rays is i + r = 130°.

Four rays for drawing images

Any ray from an object reflects according to the laws, but four rays are easy to draw. Using any two of them, the point where the reflected rays meet (or appear to meet) is the image.

Standard rays for spherical mirrors

  • Parallel to the principal axis
    • Concave: passes through F after reflection
    • Convex: appears to diverge from F behind the mirror
  • Through the principal focus
    • Concave: a ray passing through F comes back parallel to the axis
    • Convex: a ray heading towards F comes back parallel
  • Through the centre of curvature
    • Strikes the mirror along the normal
    • Comes back along the same path
  • Striking the pole obliquely
    • Reflects at an equal angle on the other side of the principal axis

Key takeaways: the angle of incidence equals the angle of reflection, and both rays lie in one plane with the normal. A concave mirror converges light and a convex mirror diverges it. The pole, centre of curvature, focus and principal axis are the reference points of every diagram, and R = 2f. Two of the four standard rays are enough to locate an image.

Check your understanding

  1. 1. A ray falls on a plane mirror at an angle of 40° to the surface of the mirror. What is the angle of reflection?

    1. 40°
    2. 50°
    3. 80°
    4. 90°
    Show answer

    Answer: B. Angles are measured from the normal. The angle of incidence is 90° − 40° = 50°, and since the angle of reflection equals the angle of incidence, r = 50°.

  2. 2. The radius of curvature of a convex mirror is 30 cm. Its focal length is

    1. 60 cm
    2. 30 cm
    3. 20 cm
    4. 15 cm
    Show answer

    Answer: D. f = R ÷ 2 = 30 ÷ 2 = 15 cm. For a convex mirror the focus lies 15 cm behind the mirror.

  3. 3. Which mirror is called a converging mirror?

    1. Concave mirror
    2. Convex mirror
    3. Plane mirror
    4. Every mirror equally
    Show answer

    Answer: A. A concave mirror brings rays parallel to its principal axis together at a real focus in front of it, so it converges light. A convex mirror spreads such rays out.

  4. 4. A ray of light passes through the centre of curvature of a concave mirror and strikes it. After reflection the ray

    1. passes through the principal focus
    2. becomes parallel to the principal axis
    3. retraces its own path
    4. passes through the pole
    Show answer

    Answer: C. A ray through C meets the mirror along the normal, so i = 0° and r = 0°. It returns along the same line.

  5. 5. Assertion (A): For a concave mirror of small aperture, the principal focus lies midway between the pole and the centre of curvature.
    Reason (R): The focal length of such a mirror is half its radius of curvature.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both statements are true. Because f = R ÷ 2, the focus is at half the distance from P to C, i.e. midway; so R correctly explains A.

Privacy · Terms · Refunds · Delivery