Revision notes

Chapter 9 Light – Reflection and Refraction: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Reflection of light and the parts of a spherical mirror

Concave and convex mirrors

  • Concave mirror
    • Reflecting surface curves inwards
    • Parallel rays converge to a real focus in front
    • Called a converging mirror
    • Can form real or virtual images
  • Convex mirror
    • Reflecting surface bulges outwards
    • Parallel rays diverge and seem to come from a focus behind
    • Called a diverging mirror
    • Always forms a virtual, erect, smaller image
Parts of a spherical mirror
TermMeaning
Pole (P)The centre of the reflecting surface of the mirror
Centre of curvature (C)The centre of the sphere of which the mirror is a part; in front of a concave mirror, behind a convex mirror
Radius of curvature (R)The radius of that sphere, i.e. the distance PC
Principal axisThe straight line through the pole and the centre of curvature
Principal focus (F)The point where rays parallel to the principal axis meet after reflection (concave), or appear to come from (convex)
Focal length (f)The distance PF between the pole and the principal focus
ApertureThe diameter of the reflecting surface

R = 2f: the radius of curvature of a spherical mirror is twice its focal length.

Standard rays for spherical mirrors

  • Parallel to the principal axis
    • Concave: passes through F after reflection
    • Convex: appears to diverge from F behind the mirror
  • Through the principal focus
    • Concave: a ray passing through F comes back parallel to the axis
    • Convex: a ray heading towards F comes back parallel
  • Through the centre of curvature
    • Strikes the mirror along the normal
    • Comes back along the same path
  • Striking the pole obliquely
    • Reflects at an equal angle on the other side of the principal axis

Key takeaways: the angle of incidence equals the angle of reflection, and both rays lie in one plane with the normal. A concave mirror converges light and a convex mirror diverges it. The pole, centre of curvature, focus and principal axis are the reference points of every diagram, and R = 2f. Two of the four standard rays are enough to locate an image.

Read the full lesson

Lesson 2

Images formed by concave and convex mirrors

Image formation by a concave mirror
Position of objectPosition of imageSize of imageNature
At infinityAt FHighly diminished, point-sizedReal and inverted
Beyond CBetween F and CDiminishedReal and inverted
At CAt CSame sizeReal and inverted
Between C and FBeyond CEnlargedReal and inverted
At FAt infinityHighly enlargedReal and inverted
Between P and FBehind the mirrorEnlargedVirtual and erect

Bringing an object closer to a concave mirror

  1. Far beyond C Small real image near F
  2. At C Real image at C, same size
  3. Between C and F Real image beyond C, larger
  4. At F Rays leave parallel; image at infinity
  5. Inside F Virtual, erect, enlarged image behind the mirror
As the object moves in, the real image moves out and grows, until it flips to a virtual image.
Image formation by a convex mirror
Position of objectPosition of imageSize of imageNature
At infinityAt F, behind the mirrorHighly diminished, point-sizedVirtual and erect
Between infinity and the poleBetween P and F, behind the mirrorDiminishedVirtual and erect

A convex mirror always forms a virtual, erect and diminished image; a concave mirror forms a virtual, erect, enlarged image only when the object is between its pole and focus.

Where each mirror is used

  • Concave mirror
    • Torches, vehicle headlights and searchlights: a bulb at F gives a strong parallel beam
    • Shaving and make-up mirrors: enlarged, erect view of the face
    • Dentists' mirrors
    • Solar cookers and furnaces: sunlight is concentrated at F
  • Convex mirror
    • Rear-view (wing) mirrors of vehicles
    • Image is always erect
    • Image is smaller, so a much wider field of view fits in the mirror
    • Mirrors at blind turns on hill roads

Key takeaways: a real image can be caught on a screen and is inverted; a virtual image cannot and is erect. For a concave mirror, the image is real for every object position beyond F, gets larger as the object approaches F, and becomes virtual and enlarged inside F. A convex mirror always gives a virtual, erect, diminished image, which is why it gives drivers a wide view.

Read the full lesson

Lesson 3

Sign convention, mirror formula and magnification

Signs at a glance
QuantityConcave mirrorConvex mirror
Object distance uNegativeNegative
Focal length fNegativePositive
Image distance vNegative if real, positive if virtualAlways positive
Image height h′Negative if real (inverted), positive if virtualAlways positive

Mirror formula: 1/v + 1/u = 1/f. Magnification: m = h′/h = −v/u.

Solving a mirror problem

  1. Write the data with signs Use the sign convention for u, f and heights.
  2. Rearrange the formula For example 1/v = 1/f − 1/u.
  3. Use a common denominator Work with fractions, then invert carefully.
  4. Find m = −v/u Then h′ = m × h if a height is needed.
  5. Interpret the signs Negative v: real, in front. Positive v: virtual, behind.

Key takeaways: measure every distance from the pole; distances along the incident light are positive and against it negative, so u is always negative. Concave mirrors have negative f and convex mirrors positive f. Use 1/v + 1/u = 1/f and m = −v/u; a negative m means real and inverted, a positive m means virtual and erect. Always check the answer against the ray-diagram table.

Read the full lesson

Lesson 4

Refraction of light, the glass slab and refractive index

Which way does the ray bend?

  • Rarer to denser (air into glass)
    • Light slows down
    • Ray bends towards the normal
    • Angle of refraction is smaller than angle of incidence
  • Denser to rarer (glass into air)
    • Light speeds up
    • Ray bends away from the normal
    • Angle of refraction is larger than angle of incidence
  • Along the normal (i = 0°)
    • No bending
    • The ray goes straight through
    • Its speed still changes

Snell's law: sin i ÷ sin r = constant = refractive index of the second medium with respect to the first.

Commonly quoted values
MediumApproximate absolute refractive index
Air1.0003 (taken as 1)
Water1.33
Kerosene1.44
Crown glass1.52
Diamond2.42

Key takeaways: light bends because its speed changes between media. From rarer to denser it bends towards the normal, and from denser to rarer away from it. A glass slab gives an emergent ray parallel to the incident ray, displaced sideways. Snell's law says sin i ÷ sin r is constant. Refractive index n = c ÷ v has no unit, and a larger n means a slower, optically denser medium.

Read the full lesson

Lesson 5

Spherical lenses: images, lens formula and power

Convex and concave lenses

  • Convex lens
    • Thicker at the middle than at the edges
    • Converges parallel rays to a real focus
    • Called a converging lens
    • Focal length positive
  • Concave lens
    • Thinner at the middle than at the edges
    • Diverges parallel rays, which seem to come from a focus
    • Called a diverging lens
    • Focal length negative
Convex lens
Position of objectPosition of imageSizeNature
At infinityAt F₂Highly diminished, point-sizedReal, inverted
Beyond 2F₁Between F₂ and 2F₂DiminishedReal, inverted
At 2F₁At 2F₂Same sizeReal, inverted
Between F₁ and 2F₁Beyond 2F₂EnlargedReal, inverted
At F₁At infinityInfinitely largeReal, inverted
Between F₁ and OSame side as the objectEnlargedVirtual, erect

Lens formula: 1/v − 1/u = 1/f. Magnification: m = h′/h = v/u. Power: P = 1/f, with f in metres; unit dioptre (D).

Solving a lens problem

  1. List u, f, h with signs u negative; f positive for convex, negative for concave.
  2. Use 1/v = 1/f + 1/u Rearranged from the lens formula.
  3. Find m = v/u Then h′ = m × h.
  4. Interpret v positive and m negative: real, inverted. v negative and m positive: virtual, erect.

Key takeaways: a convex lens converges light and forms real, inverted images for objects beyond F₁, and a virtual, erect, enlarged image inside F₁. A concave lens always gives a virtual, erect, diminished image. Use 1/v − 1/u = 1/f and m = v/u with the sign convention. Power P = 1/f (in metres) is measured in dioptres: positive for convex, negative for concave, and powers of lenses in contact add.

Read the full lesson

Privacy · Terms · Refunds · Delivery