• Foundation
  • About 16 min
  • 5 practice questions

Industrial pollution and its control

Describe how industries cause air, water, thermal, land and noise pollution, and explain the measures to control it, including effluent treatment and NTPC's approach.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the four types of industrial pollution and their main sources.
  • Explain the three stages of treating industrial effluents and ways to reduce air and noise pollution.
  • Describe the steps NTPC has taken to protect the environment.

Industries contribute greatly to India's growth, but the pollution of land, water, air and the noise they cause, and the resulting environmental degradation, cannot be overlooked. Thermal power plants are among the polluting industries too.

Types of industrial pollution

How industries pollute
TypeCauses and sources (as in the textbook)Effects
AirUndesirable gases such as sulphur dioxide and carbon monoxide; particles of dust, spray, mist and smoke from chemical and paper factories, brick kilns, refineries, smelting plants and burning of fossil fuelsHarms human health, animals, plants, buildings and the atmosphere; toxic gas leaks (such as the Bhopal gas tragedy) can have long-term effects
WaterOrganic and inorganic wastes and effluents from paper, pulp, chemical, textile and dyeing industries, refineries, tanneries and electroplating units: dyes, detergents, acids, salts, heavy metals such as lead and mercury, and morePollutes rivers and water bodies
Thermal (water)Hot water from factories and thermal plants drained into rivers and ponds before coolingHarms aquatic life
Land (soil)Dumping of glass, harmful chemicals, effluents, packaging, salts and garbageMakes soil useless; pollutants seep down to groundwater
NoiseIndustrial and construction activity, machinery, generators, saws, pneumatic and electric drillsIrritation, stress, hearing impairment, higher heart rate and blood pressure

Fly ash, phospho-gypsum and iron and steel slags are the major solid wastes in India. Wastes from nuclear power plants and weapon production facilities can cause cancers, birth defects and miscarriages.

Controlling water pollution

According to the textbook, every litre of industrial waste water pollutes eight times its quantity of freshwater. Suggestions to reduce this:

  1. Minimise water use in processing by reusing and recycling it in two or more successive stages.
  2. Harvest rainwater to meet water needs.
  3. Treat hot water and effluents before releasing them into rivers and ponds.

Three stages of treating industrial effluents

  1. Primary treatment Mechanical: screening, grinding, flocculation and sedimentation.
  2. Secondary treatment Biological processes.
  3. Tertiary treatment Biological, chemical and physical processes, including recycling of waste water.

Industries' over-drawing of groundwater, where groundwater is threatened, also needs legal regulation.

Controlling air and noise pollution

  • Fit smoke stacks with electrostatic precipitators, fabric filters, scrubbers and inertial separators to reduce particulate matter.
  • Use oil or gas instead of coal in factories to reduce smoke.
  • Fit generators with silencers; redesign machinery for energy efficiency and less noise.
  • Use noise-absorbing material, and earplugs and earphones for workers.

NTPC shows the way

NTPC, a major power-providing corporation, has ISO certification for its Environment Management System (EMS) 14001 and takes a proactive approach to preserving the environment and resources such as water, oil, gas and fuels where it sets up plants. It does this through:

  • Optimum use of equipment, adopting the latest techniques and upgrading existing equipment.
  • Minimising waste by maximising ash utilisation.
  • Providing green belts for ecological balance, and afforestation.
  • Reducing pollution through ash pond management, ash water recycling and liquid waste management.
  • Ecological monitoring, reviews and online database management for all its power stations.

Sustainable development requires integrating economic development with environmental concerns: industries must grow without destroying air, water, land and health.

Worked example 1: matching remedy to pollution

Case A: a factory releases hot water into a pond and fish are dying. Problem: thermal pollution. Remedy: cool and treat the hot water before release. Case B: a brick kiln's chimney emits thick smoke. Problem: air pollution from particulates. Remedy: fit filters or scrubbers, or switch to cleaner fuel such as gas. Case C: workers near a press complain of hearing loss. Problem: noise pollution. Remedy: redesign or enclose machines with noise-absorbing material and provide earplugs.

Worked example 2: a calculation from the textbook's figure

If every litre of industrial waste water pollutes eight times its quantity of freshwater, how much freshwater do 5,000 litres of untreated waste water pollute? 5,000 × 8 = 40,000 litres. Reusing water in two stages so that only 2,500 litres are discharged would cut this to 2,500 × 8 = 20,000 litres, halving the damage.

Key takeaways: Industries cause air, water (including thermal), land and noise pollution. Water pollution can be cut by reusing water, harvesting rain and treating effluents in primary (mechanical), secondary (biological) and tertiary (biological, chemical, physical) stages. Filters, scrubbers, cleaner fuels and silencers reduce air and noise pollution. NTPC's approach shows how industry can integrate development with environmental care.

Check your understanding

  1. 1. Thermal pollution of water occurs when:

    1. hot water from factories and thermal plants is drained into rivers and ponds before cooling
    2. plastic is dumped on land
    3. smoke rises from chimneys
    4. machines make loud noise
    Show answer

    Answer: A. Draining hot water into water bodies before it cools is thermal pollution; it harms aquatic life.

  2. 2. Screening, grinding, flocculation and sedimentation belong to which stage of effluent treatment?

    1. Secondary treatment
    2. Tertiary treatment
    3. Primary treatment
    4. No treatment stage
    Show answer

    Answer: C. Primary treatment uses mechanical means: screening, grinding, flocculation and sedimentation. Secondary treatment is biological.

  3. 3. Which of these is used to reduce particulate matter from factory smoke stacks?

    1. Silencers
    2. Electrostatic precipitators
    3. Earplugs
    4. Green belts only
    Show answer

    Answer: B. Electrostatic precipitators, fabric filters, scrubbers and inertial separators fitted to smoke stacks reduce particulate matter in the air.

  4. 4. Which of these is NOT among the major solid wastes named in the textbook?

    1. Fly ash
    2. Phospho-gypsum
    3. Iron and steel slags
    4. Cotton bolls
    Show answer

    Answer: D. Fly ash, phospho-gypsum and iron and steel slags are the major solid wastes; cotton bolls are an agricultural raw material.

  5. 5. Assertion (A): Land pollution can lead to groundwater contamination.
    Reason (R): Rainwater percolating into the soil carries pollutants down to the groundwater.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true and R explains A: dumped wastes on land are washed down by percolating rainwater, contaminating groundwater.

Privacy · Terms · Refunds · Delivery