- Foundation
- About 16 min
- 5 practice questions
Mineral-based industries: iron and steel, and aluminium smelting
Explain why iron and steel is a basic and heavy industry, the 4:2:1 raw material ratio, why the Chhotanagpur plateau has most steel plants, and how aluminium smelting is located.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why iron and steel is called a basic and a heavy industry.
- Describe the raw materials and process of steel making and the advantages of the Chhotanagpur region.
- Explain the properties and uses of aluminium and the factors that locate aluminium smelters.
Industries that use minerals and metals as raw materials are mineral-based industries. The two most important metallurgical industries are iron and steel, and aluminium smelting.
Iron and steel: the basic industry
Iron and steel is the basic industry, because all other industries, heavy, medium and light, depend on it for their machinery. Steel is needed for engineering goods, construction material, defence, medical, telephonic and scientific equipment and many consumer goods. Production and consumption of steel is often regarded as an index of a country's development.
It is also a heavy industry: all its raw materials and finished goods are heavy and bulky, so transport costs are high. Iron ore, coking coal and limestone are needed in the ratio of approximately 4 : 2 : 1, and some manganese is added to harden the steel. Finished products also need efficient transport to reach markets.
Raw materials for steel: iron ore : coking coal : limestone ≈ 4 : 2 : 1, plus a little manganese to harden the steel.
How steel is made
- Raw materials Iron ore, coking coal and limestone.
- Blast furnace Ore is smelted; limestone removes impurities as slag.
- Pig iron Molten iron from the furnace.
- Steel making Impurities reduced; manganese and other metals added.
- Shaping Rolled and cast into sheets, bars, rails and other products.
Worked example 1: using the ratio
A steel plant plans to use 8,000 tonnes of iron ore in a month. Using 4 : 2 : 1, one 'part' = 8,000 ÷ 4 = 2,000 tonnes. Coking coal = 2 parts = 4,000 tonnes; limestone = 1 part = 2,000 tonnes. Total raw material = 8,000 + 4,000 + 2,000 = 14,000 tonnes for one month. Moving such huge, heavy loads is why steel plants are built close to their raw materials.
Why the Chhotanagpur plateau?
The Chhotanagpur plateau region has the maximum concentration of iron and steel industries because of its relative advantages:
- Low cost of iron ore.
- High-grade raw materials close at hand (iron ore, coal and other minerals of the region).
- Cheap labour.
- Vast growth potential in the home market.
Aluminium smelting
Aluminium smelting is the second most important metallurgical industry in India. Aluminium is light, resistant to corrosion, a good conductor of heat, malleable, and becomes strong when mixed with other metals. It is used for aircraft, utensils and wires, and has become a popular substitute for steel, copper, zinc and lead in many industries. Smelting plants are in Odisha, West Bengal, Kerala, Uttar Pradesh, Chhattisgarh, Maharashtra and Tamil Nadu.
The raw material, bauxite, is a very bulky, dark reddish rock. The two prime location factors are a regular supply of electricity and an assured source of raw material at minimum cost.
From bauxite to aluminium
- Bauxite mined Bulky, dark reddish rock.
- Refined into alumina Aluminium oxide is separated from impurities.
- Smelted using electricity Large, steady power supply is essential.
- Aluminium Rolled into sheets, wires and other products.
Worked example 2: choosing a site
A company must choose between two sites for an aluminium smelter. Site A is next to bauxite mines and has a large power station nearby. Site B is a big city market far from bauxite and with frequent power cuts. Apply the two prime factors: regular electricity and cheap, assured raw material. Site A satisfies both, so it is the better choice; the finished aluminium, being light and valuable, can be transported to markets more easily than bulky bauxite.
Two metallurgical industries
-
Iron and steel
- Basic and heavy industry
- Iron ore, coking coal, limestone (4:2:1), manganese
- Concentrated on the Chhotanagpur plateau
-
Aluminium smelting
- Second most important metallurgical industry
- Bauxite refined to alumina, then smelted
- Located by cheap electricity and assured raw material
Key takeaways: Iron and steel is basic (others depend on it for machinery) and heavy (bulky inputs and outputs). It needs iron ore, coking coal and limestone in about 4 : 2 : 1, plus manganese. The Chhotanagpur plateau leads because of cheap iron ore, nearby high-grade raw materials, cheap labour and a large home market. Aluminium is light, corrosion-resistant and malleable; smelters need regular electricity and cheap, assured bauxite.
Check your understanding
-
1. Iron ore, coking coal and limestone are used in steel making in approximately which ratio?
- 1 : 2 : 4
- 4 : 2 : 1
- 2 : 2 : 1
- 4 : 1 : 2
Show answer
Answer: B. The textbook gives the ratio of iron ore, coking coal and limestone as approximately 4 : 2 : 1.
-
2. Which industry uses bauxite as its raw material?
- Cement
- Paper
- Steel
- Aluminium smelting
Show answer
Answer: D. Bauxite is refined into alumina, which is then smelted to obtain aluminium.
-
3. Why is iron and steel called a basic industry?
- All other industries depend on it for their machinery
- It is the oldest industry in India
- It uses only agricultural raw materials
- It is run only by cooperatives
Show answer
Answer: A. Heavy, medium and light industries all depend on iron and steel for their machinery, so it is the basic industry.
-
4. What are the two prime factors for locating an aluminium smelting plant?
- A moist climate and a sea port
- Cheap labour and a cool climate
- Regular supply of electricity and an assured source of raw material at minimum cost
- Proximity to cotton fields and rivers
Show answer
Answer: C. Smelting needs large amounts of electricity, and bauxite is bulky, so regular power and cheap, assured raw material decide the location.
-
5. Assertion (A): The Chhotanagpur plateau has the maximum concentration of iron and steel industries.
Reason (R): The region offers low-cost iron ore, high-grade raw materials close at hand, cheap labour and a large home market.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true and R explains A: these relative advantages explain why steel plants are concentrated in the Chhotanagpur region.
Sign in to keep track of the lessons you finish.