• Foundation
  • About 20 min
  • 5 practice questions

The Calvin cycle: how ATP and NADPH fix carbon dioxide

Explain how the first product of CO₂ fixation was found, describe carboxylation, reduction and regeneration, and calculate the ATP and NADPH used to make one glucose.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how Calvin identified 3-PGA as the first product.
  • Name RuBP as the CO₂ acceptor and RuBisCO as the enzyme.
  • Describe the three stages of the Calvin cycle.
  • Calculate ATP and NADPH needed for any number of CO₂ fixed.

The light reaction releases O₂ and hands ATP and NADPH to the stroma. Here the biosynthetic phase uses them, together with CO₂ and water, to make sugar. This phase does not need light directly, but it stops when the supply of ATP and NADPH runs out.

Finding the first product

After the Second World War, Melvin Calvin and co-workers fed radioactive ¹⁴CO₂ to algae and traced where the label appeared first. The first stable product was a 3-carbon acid, 3-phosphoglyceric acid (3-PGA). Calvin worked out the whole cyclic pathway, now called the Calvin cycle, and received the Nobel Prize in 1961.

Plants in which the first product is the C₃ acid PGA are said to follow the C₃ pathway. Later another group was found in which the first stable product is the 4-carbon oxaloacetic acid (OAA): the C₄ pathway (next lesson).

The primary CO₂ acceptor

Scientists first assumed that since the product had 3 carbons, the acceptor must have 2 carbons (2 + 1 = 3), and spent years looking for it. The surprise was that the acceptor is a 5-carbon ketose sugar, ribulose-1,5-bisphosphate (RuBP). One RuBP (5C) plus one CO₂ (1C) gives an unstable 6-carbon unit that splits at once into two molecules of 3-PGA (2 × 3C = 6C).

The three stages

The Calvin cycle

  1. Carboxylation RuBisCO joins CO₂ to RuBP, giving two molecules of 3-PGA.
  2. Reduction ATP and NADPH convert 3-PGA to triose phosphate, the source of sugars (2 ATP and 2 NADPH per CO₂).
  3. Regeneration Some triose phosphate rebuilds RuBP, using 1 ATP per CO₂.

Then back to step 1: Carboxylation

The cycle turns once for every CO₂ fixed.
  • Carboxylation is the fixation of CO₂ into a stable organic intermediate and is the most crucial step. It is catalysed by RuBP carboxylase. Because the same enzyme can also add O₂, it is more correctly called RuBP carboxylase-oxygenase, or RuBisCO.
  • Reduction is a series of reactions that use 2 ATP (for phosphorylation) and 2 NADPH (for reduction) for each CO₂ fixed, forming carbohydrate.
  • Regeneration of RuBP needs 1 ATP per CO₂. Without it the cycle would stop.

Per CO₂ fixed: 3 ATP + 2 NADPH. Per glucose (6 CO₂, 6 turns): 18 ATP + 12 NADPH.

Inputs and outputs of the Calvin cycle for one glucose
InOut
6 CO₂1 glucose
18 ATP18 ADP
12 NADPH12 NADP⁺

Why does cyclic photophosphorylation exist? Non-cyclic flow gives ATP and NADPH, but the Calvin cycle needs them in the ratio 3 : 2. The extra ATP that cyclic flow provides helps meet this difference.

Worked example 1: ATP and NADPH for sucrose

Sucrose has 12 carbon atoms. How many ATP and NADPH does the Calvin cycle need to fix the carbon for one sucrose molecule? Step 1: carbons needed = 12, so 12 CO₂ must be fixed (12 turns). Step 2: ATP = 12 × 3 = 36. Step 3: NADPH = 12 × 2 = 24. Answer: 36 ATP and 24 NADPH (ignoring the small extra energy used to join the two hexoses).

Worked example 2: counting carbons in carboxylation

In one turn, 3 molecules of RuBP each fix one CO₂. How many 3-PGA molecules form, and do the carbon atoms balance? Step 1: carbons in = 3 × 5 (RuBP) + 3 × 1 (CO₂) = 18. Step 2: each carboxylation gives 2 PGA, so 3 × 2 = 6 PGA. Step 3: carbons out = 6 × 3 = 18. Balanced. Of these, the equivalent of 1 triose (3C, from the 3 CO₂) can leave the cycle and 15 carbons rebuild 3 RuBP (3 × 5 = 15).

Key takeaways: the first product of CO₂ fixation in C₃ plants is 3-PGA, and the acceptor is the 5-carbon RuBP. RuBisCO carries out carboxylation. Reduction uses 2 ATP and 2 NADPH, and regeneration 1 ATP, per CO₂. Six turns make one glucose using 18 ATP and 12 NADPH. The Calvin cycle runs in all photosynthetic plants, whether C₃ or C₄.

Check your understanding

  1. 1. What is the primary acceptor of CO₂ in the Calvin cycle?

    1. Phosphoenol pyruvate
    2. Ribulose-1,5-bisphosphate
    3. 3-phosphoglyceric acid
    4. Oxaloacetic acid
    Show answer

    Answer: B. The 5-carbon sugar RuBP accepts CO₂, catalysed by RuBisCO, giving two molecules of 3-PGA. PEP is the acceptor in mesophyll cells of C₄ plants, not in the Calvin cycle.

  2. 2. How many molecules of ATP are needed by the Calvin cycle to fix 4 molecules of CO₂?

    1. 8
    2. 16
    3. 12
    4. 24
    Show answer

    Answer: C. Each CO₂ fixed needs 3 ATP (2 in reduction + 1 in regeneration). For 4 CO₂: 4 × 3 = 12 ATP.

  3. 3. How many NADPH molecules are needed to make one molecule of glucose through the Calvin cycle?

    1. 12
    2. 18
    3. 6
    4. 24
    Show answer

    Answer: A. One glucose needs 6 CO₂ fixed. Each CO₂ needs 2 NADPH, so 6 × 2 = 12 NADPH. (The 18 is the ATP requirement.)

  4. 4. Assertion (A): Scientists long expected the CO₂ acceptor to be a 2-carbon compound.
    Reason (R): The acceptor actually found was a 5-carbon sugar that splits into two 3-carbon molecules after fixing CO₂.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: B. Both statements are true. Scientists expected a 2-carbon acceptor because the product had 3 carbons and they assumed one product molecule per CO₂. R describes what was actually found; it does not explain why they expected a 2-carbon compound, so R is not the explanation of A.

  5. 5. Which stage of the Calvin cycle uses ATP but no NADPH?

    1. Carboxylation
    2. Reduction
    3. Photolysis
    4. Regeneration
    Show answer

    Answer: D. Regeneration of RuBP uses 1 ATP per CO₂ and no NADPH. Reduction uses both ATP and NADPH; carboxylation uses neither.

Privacy · Terms · Refunds · Delivery