Revision notes

Chapter 1 Some Basic Concepts of Chemistry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Chemistry, matter and its classification

How the three states compare
FeatureSolidLiquidGas
Particle spacingVery close, orderlyClose, but not fixed in placeFar apart
Particle movementVery littleCan move past one anotherEasy and fast
ShapeDefiniteTakes the shape of the containerFills the whole container
VolumeDefiniteDefiniteNot definite

Matter

  • Mixtures Variable composition; separable by physical methods
    • Homogeneous: uniform throughout (air, sugar solution)
    • Heterogeneous: not uniform (sand in water, grains with stones)
  • Pure substances Fixed composition
    • Elements: one kind of atom (Cu, Na, H₂, O₂)
    • Compounds: elements in a fixed ratio (H₂O, CO₂, NaCl)
Classification of matter at the bulk level

A mixture has variable composition and can be separated by physical methods. A compound has a fixed composition, properties unlike its elements, and can be split only by chemical methods.

— Mixture or compound?
  • Chemistry grew out of alchemy and iatrochemistry; India's Rasayan Shastra, Harappan crafts and Kanad's idea of Paramanu are part of its story.
  • Solids have definite shape and volume, liquids definite volume only, gases neither.
  • Mixtures (homogeneous or heterogeneous) have variable composition; pure substances (elements or compounds) have fixed composition.
  • Physical properties are observed without changing the substance; chemical properties need a chemical change.
Read the full lesson

Lesson 2

SI units and measuring mass, volume, density and temperature

The seven SI base quantities
Base quantitySymbolSI unitUnit symbol
Lengthlmetrem
Massmkilogramkg
Timetseconds
Electric currentIampereA
Thermodynamic temperatureTkelvinK
Amount of substancenmolemol
Luminous intensityIᵥcandelacd
Common SI prefixes (the full list runs from yocto, 10⁻²⁴, to yotta, 10²⁴)
PrefixSymbolMultiple
femtof10⁻¹⁵
picop10⁻¹²
nanon10⁻⁹
microµ10⁻⁶
millim10⁻³
centic10⁻²
decid10⁻¹
decada10
hectoh10²
kilok10³
megaM10⁶
gigaG10⁹
teraT10¹²
petaP10¹⁵

Mass versus weight

  • Mass
    • Amount of matter in the object
    • Same everywhere
    • SI unit: kilogram (kg)
    • Measured with a balance
  • Weight
    • Force of gravity on the object
    • Changes with gravity (less on the Moon)
    • SI unit: newton (N)
    • Measured with a spring balance

1 L = 1000 mL = 1 dm³ = 1000 cm³, so 1 mL = 1 cm³ and 1 m³ = 1000 L.

— Volume units

°F = (9/5)(°C) + 32 K = °C + 273.15 Density = mass ÷ volume

— Formulas to remember
  • A measurement is a number plus a unit; SI has seven base units, and other units are derived from them.
  • Each SI base unit is now fixed by an exact constant of nature; NPL, New Delhi keeps India's national standards.
  • Mass is constant; weight depends on gravity.
  • 1 L = 1 dm³ = 1000 cm³; density = mass ÷ volume (1 g cm⁻³ = 1000 kg m⁻³).
  • °F = (9/5)°C + 32 and K = °C + 273.15; kelvin temperatures are never negative.
Read the full lesson

Lesson 3

Scientific notation, significant figures and dimensional analysis

Counting significant figures
RuleExampleSignificant figures
All non-zero digits count357 cm3
Zeros before the first non-zero digit do not count0.0047 g2
Zeros between non-zero digits count3.009 m4
Trailing zeros count if there is a decimal point0.500 L3
Trailing zeros without a decimal point are not significant4001
Exact counts have unlimited significant figures12 test tubesinfinite

Adding or subtracting: keep as many decimal places as the number with the fewest decimal places. Multiplying or dividing: keep as many significant figures as the number with the fewest significant figures.

— Reporting a calculated result
Made-up readings for an object whose true mass is 10.00 g
StudentReading 1 / gReading 2 / gVerdict
P9.829.84Precise, not accurate
Q9.7010.25Neither precise nor accurate
R10.019.99Precise and accurate

Precision versus accuracy

  • Precision
    • Closeness of repeated readings to each other
    • Shows how reproducible a method is
    • Can be high even if every reading is wrong
  • Accuracy
    • Closeness of a reading to the true value
    • Shows how correct the result is
    • Needs a calibrated instrument and good technique

The unit factor method

  1. Write the given quantity Number with its unit
  2. Pick a known equality For example 1 km = 1000 m
  3. Form the unit factor Wanted unit on top, old unit below
  4. Multiply and cancel Chain several factors if needed
  5. Check the unit and size Does the answer make sense?
  • Scientific notation is N × 10ⁿ with 1 ≤ N < 10; add exponents to multiply, subtract to divide, match exponents to add.
  • Significant figures = certain digits + one uncertain digit; leading zeros never count.
  • Sums keep the fewest decimal places; products keep the fewest significant figures.
  • Precision is agreement between readings; accuracy is agreement with the true value.
  • Unit factors equal 1; put the wanted unit on top.
Read the full lesson

Lesson 4

Laws of chemical combination, atomic masses and the mole

Laws of chemical combination
LawProposed byWhat it says
Conservation of massAntoine Lavoisier, 1789In any physical or chemical change there is no net change in mass; matter is neither created nor destroyed.
Definite proportions (definite composition)Joseph ProustA given compound always contains the same elements in the same proportion by mass, whatever its source.
Multiple proportionsJohn Dalton, 1803When two elements form more than one compound, the masses of one element that combine with a fixed mass of the other are in a simple whole-number ratio.
Gaseous volumesJoseph Gay-Lussac, 1808Gases react and form gaseous products in simple whole-number ratios by volume, at the same temperature and pressure.
Avogadro's lawAmedeo Avogadro, 1811Equal volumes of all gases at the same temperature and pressure contain equal numbers of molecules.

From measurements to atoms

  1. Careful weighing and gas measurements Lavoisier, Proust, Dalton, Gay-Lussac
  2. Laws of chemical combination Mass and volume regularities
  3. Dalton's atomic theory, 1808 Atoms combine in fixed ratios
  4. Avogadro's molecules, 1811 Explains volume ratios of gases

Amount of substance n = m ÷ M = N ÷ N_A, where m is mass in g, M is molar mass in g mol⁻¹, N is number of particles and N_A = 6.022 × 10²³ mol⁻¹.

— The mole relationships

Converting between mass, moles and particles

  1. Mass in grams Divide by molar mass M
  2. Amount in moles Multiply by N_A = 6.022 × 10²³ mol⁻¹
  3. Number of particles Multiply by atoms per molecule to count atoms
  • Five laws (conservation of mass, definite and multiple proportions, gaseous volumes, Avogadro's law) led to Dalton's atomic theory.
  • Dalton explained the mass laws but not the volume law; Avogadro's molecules (H₂, O₂) did.
  • 1 u = 1/12 of the mass of a carbon-12 atom; tabulated atomic masses are abundance-weighted averages.
  • Molecular mass for molecules, formula mass for ionic solids such as NaCl.
  • One mole = 6.022 × 10²³ entities; n = m/M = N/N_A.
Read the full lesson

Lesson 5

Percentage composition, stoichiometry and concentration of solutions

Mass % of an element = (mass of that element in one mole of the compound ÷ molar mass of the compound) × 100

— Percentage composition

From percentage data to molecular formula

  1. Take 100 g of compound Each mass % becomes grams
  2. Convert grams to moles Divide by each atomic mass
  3. Divide by the smallest Make whole numbers, multiplying if needed
  4. Write the empirical formula Find its formula mass
  5. Find n and the molecular formula n = molar mass ÷ empirical formula mass
What one balanced equation tells us (mass is conserved: 28.02 + 6.048 = 34.07 g)
Reading of N₂(g) + 3H₂(g) → 2NH₃(g)N₂H₂NH₃
Molecules132
Moles1 mol3 mol2 mol
Mass28.02 g6.048 g34.07 g
Volume at STP (22.7 L mol⁻¹)22.7 L68.1 L45.4 L
Four ways to express concentration
MeasureDefinitionUnitChanges with temperature?
Mass per cent (w/w)(mass of solute ÷ mass of solution) × 100%No
Mole fraction, xx_A = n_A ÷ (n_A + n_B); all mole fractions add to 1noneNo
Molarity, Mmoles of solute ÷ volume of solution in litresmol L⁻¹ (M)Yes: volume changes
Molality, mmoles of solute ÷ mass of solvent in kgmol kg⁻¹ (m)No: mass is fixed

Molarity versus molality

  • Molarity (M)
    • Moles of solute per litre of solution
    • Uses the volume of the whole solution
    • Changes with temperature
    • Easy to use with volumetric glassware
  • Molality (m)
    • Moles of solute per kilogram of solvent
    • Uses the mass of the solvent only
    • Does not change with temperature
    • Needs the solvent to be weighed
  • Mass % = mass of element in one mole ÷ molar mass × 100.
  • Empirical formula = simplest ratio; molecular formula = n × empirical formula, n = molar mass ÷ empirical formula mass.
  • Balance with coefficients, never subscripts; coefficients give mole (and gas volume) ratios.
  • The limiting reagent is used up first and fixes the amount of product.
  • Molarity uses litres of solution and varies with temperature; molality uses kg of solvent and does not; M₁V₁ = M₂V₂ for dilution.
Read the full lesson

Privacy · Terms · Refunds · Delivery