• Foundation
  • About 22 min
  • 5 practice questions

Scientific notation, significant figures and dimensional analysis

Handle very large and small numbers, report results with the right significant figures and rounding, tell precision from accuracy, and convert units with unit factors.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write very large and very small numbers in scientific notation and calculate with them.
  • Count significant figures using the five rules.
  • Report sums, differences, products and quotients to the right number of significant figures, rounding correctly.
  • Distinguish precision from accuracy.
  • Convert units with unit factors (dimensional analysis).

Chemists work with numbers that are enormous (2 g of hydrogen gas contains about 602 200 000 000 000 000 000 000 molecules) and numbers that are tiny (one hydrogen atom has a mass of about 0.000 000 000 000 000 000 000 001 67 g). Every measured number is also slightly uncertain. This lesson gives the tools to handle both problems honestly.

Scientific notation

In scientific (exponential) notation a number is written as N × 10ⁿ, where the digit term N lies between 1.000… and 9.999… and the exponent n is a positive or negative whole number. Moving the decimal point to the left raises n; moving it to the right lowers n. So 45 600 000 = 4.56 × 10⁷ (point moved 7 places left) and 0.000 0725 = 7.25 × 10⁻⁵ (point moved 5 places right).

  • Multiplication: multiply the digit terms and add the exponents.
  • Division: divide the digit terms and subtract the exponents.
  • Addition and subtraction: first rewrite the numbers with the same exponent, then add or subtract the digit terms.

Worked example 1: operations in scientific notation

(a) (4.0 × 10³) × (2.5 × 10⁻⁵) = (4.0 × 2.5) × 10³⁺⁽⁻⁵⁾ = 10 × 10⁻² = 1.0 × 10⁻¹. (b) (9.6 × 10⁴) ÷ (3.2 × 10⁻²) = (9.6 ÷ 3.2) × 10⁴⁻⁽⁻²⁾ = 3.0 × 10⁶. (c) (3.42 × 10⁵) + (6.1 × 10⁴) = (3.42 × 10⁵) + (0.61 × 10⁵) = (3.42 + 0.61) × 10⁵ = 4.03 × 10⁵.

Significant figures

Every measurement is limited by the instrument and by the person using it. An object might read 9.4 g on a platform balance and 9.4213 g on an analytical balance; in the first reading the 4 is already uncertain. Significant figures are the digits known with certainty plus one final estimated digit. Writing 11.2 mL means 11 is certain and the 2 is uncertain by ±1; unless stated otherwise, ±1 in the last digit is understood.

Counting significant figures
RuleExampleSignificant figures
All non-zero digits count357 cm3
Zeros before the first non-zero digit do not count0.0047 g2
Zeros between non-zero digits count3.009 m4
Trailing zeros count if there is a decimal point0.500 L3
Trailing zeros without a decimal point are not significant4001
Exact counts have unlimited significant figures12 test tubesinfinite

Scientific notation removes the doubt about trailing zeros: 400 with one significant figure is 4 × 10², with two is 4.0 × 10², with three is 4.00 × 10². In scientific notation every digit of N is significant, so 6.020 × 10⁻³ has four.

Significant figures in calculations

Adding or subtracting: keep as many decimal places as the number with the fewest decimal places. Multiplying or dividing: keep as many significant figures as the number with the fewest significant figures.

— Reporting a calculated result

Rounding off. If the first digit to be dropped is more than 5, raise the digit before it by one (2.476 → 2.48). If it is less than 5, leave the digit before it unchanged (7.823 → 7.82). If it is exactly 5, the NCERT rule is: leave the preceding digit unchanged if it is even, and raise it by one if it is odd (3.45 → 3.4, but 3.75 → 3.8).

Worked example 2: reporting results

(a) 15.42 + 3.6 + 0.135 = 19.155. The number 3.6 has only one decimal place, so the sum is reported as 19.2. (b) 3.24 × 2.1 = 6.804. The factor 2.1 has two significant figures, so the product is reported as 6.8. (c) Round 0.04575 to three significant figures: the digit to drop is 5 and the digit before it, 7, is odd, so raise it: 0.0458.

Precision and accuracy

Precision is how close repeated measurements of the same quantity are to one another. Accuracy is how close a value is to the true value. A result can be precise without being accurate, for example if a balance is wrongly calibrated.

Made-up readings for an object whose true mass is 10.00 g
StudentReading 1 / gReading 2 / gVerdict
P9.829.84Precise, not accurate
Q9.7010.25Neither precise nor accurate
R10.019.99Precise and accurate

Precision versus accuracy

  • Precision
    • Closeness of repeated readings to each other
    • Shows how reproducible a method is
    • Can be high even if every reading is wrong
  • Accuracy
    • Closeness of a reading to the true value
    • Shows how correct the result is
    • Needs a calibrated instrument and good technique

Dimensional analysis

To change units we use the unit factor method (factor-label method, or dimensional analysis). From an equality such as 1 in = 2.54 cm we make two unit factors, (2.54 cm ÷ 1 in) and (1 in ÷ 2.54 cm), each equal to 1. Multiplying by 1 does not change a quantity, so we choose the factor that has the wanted unit in the numerator; the old unit then cancels. Units can be multiplied, divided, cancelled and squared or cubed just like numbers.

The unit factor method

  1. Write the given quantity Number with its unit
  2. Pick a known equality For example 1 km = 1000 m
  3. Form the unit factor Wanted unit on top, old unit below
  4. Multiply and cancel Chain several factors if needed
  5. Check the unit and size Does the answer make sense?

Worked example 3: unit factors in a chain

(a) A laptop screen is 15 in across. 15 in × (2.54 cm ÷ 1 in) = 38.1 cm. (b) Convert 72 km h⁻¹ to m s⁻¹: 72 km/h × (1000 m ÷ 1 km) × (1 h ÷ 3600 s) = 72 000 ÷ 3600 = 20 m s⁻¹. (c) Convert 0.5 m³ to litres: cube the length factor, (100 cm ÷ 1 m)³ = 10⁶ cm³ per m³, so 0.5 m³ × 10⁶ cm³ m⁻³ × (1 L ÷ 1000 cm³) = 500 L.

Key takeaways

  • Scientific notation is N × 10ⁿ with 1 ≤ N < 10; add exponents to multiply, subtract to divide, match exponents to add.
  • Significant figures = certain digits + one uncertain digit; leading zeros never count.
  • Sums keep the fewest decimal places; products keep the fewest significant figures.
  • Precision is agreement between readings; accuracy is agreement with the true value.
  • Unit factors equal 1; put the wanted unit on top.

Check your understanding

  1. 1. How many significant figures are there in 0.004050?

    1. 4
    2. 3
    3. 6
    4. 7
    Show answer

    Answer: A. The leading zeros (0.00) only place the decimal point and do not count. Then 4 and 5 count, the zero between them counts, and the final zero counts because it follows a decimal point. That gives 4, 0, 5, 0: four significant figures.

  2. 2. A student multiplies 2.35 by 1.4. How should the answer be reported?

    1. 3.29
    2. 3.3
    3. 3.290
    4. 3
    Show answer

    Answer: B. 2.35 × 1.4 = 3.29. In multiplication the result keeps as many significant figures as the factor with the fewest, here 1.4 with two. Rounding 3.29 to two significant figures gives 3.3.

  3. 3. Assertion (A): The sum 12.1 + 0.256 should be reported as 12.4. Reason (R): In addition, the result keeps as many decimal places as the number with the fewest decimal places.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. 12.1 + 0.256 = 12.356. The number 12.1 has one decimal place, so the result is rounded to one decimal place: 12.4. Both statements are true, and R is the rule that produces A.

  4. 4. A car travels at 54 km h⁻¹. What is its speed in m s⁻¹?

    1. 194.4 m s⁻¹
    2. 0.015 m s⁻¹
    3. 15 m s⁻¹
    4. 150 m s⁻¹
    Show answer

    Answer: C. 54 km/h × (1000 m ÷ 1 km) × (1 h ÷ 3600 s) = 54 000 ÷ 3600 = 15 m s⁻¹. Multiplying by 3.6 instead of dividing gives the wrong 194.4.

  5. 5. Using the NCERT rounding rule, what is 6.65 rounded to two significant figures?

    1. 6.7
    2. 7.0
    3. 6.65
    4. 6.6
    Show answer

    Answer: D. The digit to be dropped is exactly 5. The rule says leave the preceding digit unchanged if it is even. The preceding digit is 6, which is even, so 6.65 becomes 6.6.

Privacy · Terms · Refunds · Delivery