• Foundation
  • About 20 min
  • 5 practice questions

SI units and measuring mass, volume, density and temperature

Use the seven SI base units and prefixes, tell mass from weight, convert volume units, calculate density and convert temperatures between Celsius, Fahrenheit and Kelvin.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the seven SI base quantities with their units and symbols, and use SI prefixes.
  • Explain the difference between mass and weight.
  • Convert volumes between m³, dm³, cm³, L and mL.
  • Calculate density and express it in g cm⁻³ and kg m⁻³.
  • Convert temperatures between the Celsius, Fahrenheit and Kelvin scales.

Chemistry is a quantitative science. Saying a room is "long" tells us little; saying it is 6 m long tells us exactly. Every measured quantity is a number followed by a unit, and without the unit the number is meaningless. This lesson sets out the agreed units and the physical properties you will measure most often.

The International System of Units (SI)

Two systems were once common: the English system and the metric system, which began in France in the late eighteenth century and was easier to use because it is decimal. To give scientists one common language, the International System of Units (Le Système International d'Unités, SI) was set up in 1960 by the 11th General Conference on Weights and Measures (CGPM). The CGPM itself was created under the Metre Convention, a treaty signed in Paris in 1875.

SI has seven base units, one for each fundamental quantity. All other quantities, such as speed, volume and density, are derived from them.

The seven SI base quantities
Base quantitySymbolSI unitUnit symbol
Lengthlmetrem
Massmkilogramkg
Timetseconds
Electric currentIampereA
Thermodynamic temperatureTkelvinK
Amount of substancenmolemol
Luminous intensityIᵥcandelacd

Today each base unit is defined by fixing the exact value of a constant of nature: the second by the caesium-133 transition frequency (9 192 631 770 Hz), the metre by the speed of light (c = 299 792 458 m s⁻¹), the kilogram by the Planck constant (h = 6.626 070 15 × 10⁻³⁴ J s), the ampere by the elementary charge (e = 1.602 176 634 × 10⁻¹⁹ C), the kelvin by the Boltzmann constant (k = 1.380 649 × 10⁻²³ J K⁻¹), the mole by the Avogadro constant (N_A = 6.022 140 76 × 10²³ mol⁻¹) and the candela by a fixed luminous efficacy (683 lm W⁻¹). Earlier, the kilogram was the mass of a platinum-iridium cylinder kept near Paris, chosen because it resists chemical attack. In India, the National Physical Laboratory (NPL), New Delhi, is the National Metrology Institute that realises these units and keeps the national standards, comparing them regularly with other countries'.

SI prefixes

Prefixes show multiples and submultiples of a unit, so we can write 3 nm instead of 0.000 000 003 m. The ones you will use most are below.

Common SI prefixes (the full list runs from yocto, 10⁻²⁴, to yotta, 10²⁴)
PrefixSymbolMultiple
femtof10⁻¹⁵
picop10⁻¹²
nanon10⁻⁹
microµ10⁻⁶
millim10⁻³
centic10⁻²
decid10⁻¹
decada10
hectoh10²
kilok10³
megaM10⁶
gigaG10⁹
teraT10¹²
petaP10¹⁵

Mass and weight

Mass is the amount of matter in an object and does not change from place to place. Weight is the force with which gravity pulls on the object, so it changes where gravity changes. Mass is measured accurately with an analytical balance. The SI unit is the kilogram, but laboratories mostly use the gram (1 kg = 1000 g) because chemical quantities are small.

Mass versus weight

  • Mass
    • Amount of matter in the object
    • Same everywhere
    • SI unit: kilogram (kg)
    • Measured with a balance
  • Weight
    • Force of gravity on the object
    • Changes with gravity (less on the Moon)
    • SI unit: newton (N)
    • Measured with a spring balance

Volume

Volume is the space a substance occupies, with units of (length)³, so the SI unit is m³. Laboratory volumes are small, so cm³ and dm³ are used, along with the litre (L), which is not an SI unit. Liquids are measured with a graduated cylinder, burette or pipette, and a volumetric flask is used to make up a solution to an exact volume.

1 L = 1000 mL = 1 dm³ = 1000 cm³, so 1 mL = 1 cm³ and 1 m³ = 1000 L.

— Volume units

Density

Density is mass per unit volume, density = mass ÷ volume. Its SI unit is kg m⁻³, which is inconveniently large for laboratory work, so chemists usually quote g cm⁻³. Since 1 g cm⁻³ = 1000 kg m⁻³, water's density of about 1 g cm⁻³ is about 1000 kg m⁻³. A higher density means the particles are packed more closely.

Temperature

Three scales are in use: degree Celsius (°C), degree Fahrenheit (°F) and kelvin (K), the SI unit. On the Celsius scale water freezes at 0° and boils at 100°; on the Fahrenheit scale the same points are 32° and 212°. Negative Celsius temperatures are common, but the Kelvin scale has no negative values, because 0 K is the lowest possible temperature.

°F = (9/5)(°C) + 32 K = °C + 273.15 Density = mass ÷ volume

— Formulas to remember

Worked example 1: density of a metal block (made-up data)

A rectangular block measures 2.0 cm × 3.0 cm × 5.0 cm and has a mass of 81 g. Find its density in g cm⁻³ and kg m⁻³. Working: volume = 2.0 × 3.0 × 5.0 = 30 cm³. Density = 81 g ÷ 30 cm³ = 2.7 g cm⁻³. To convert: 2.7 g cm⁻³ × (1 kg ÷ 1000 g) × (10⁶ cm³ ÷ 1 m³) = 2.7 × 10³ kg m⁻³ = 2700 kg m⁻³. (This value happens to match aluminium.)

Worked example 2: converting temperatures

(a) Normal body temperature is about 37 °C. In °F: (9/5) × 37 + 32 = 66.6 + 32 = 98.6 °F. In kelvin: 37 + 273.15 = 310.15 K. (b) A room is at 77 °F. Rearranging, °C = (5/9)(°F − 32) = (5/9)(77 − 32) = (5/9)(45) = 25 °C, which is 25 + 273.15 = 298.15 K. (c) Is there a temperature where °C and °F read the same? Put °F = °C = x: x = (9/5)x + 32, so −(4/5)x = 32 and x = −40. So −40 °C = −40 °F.

Worked example 3: volume conversion

A water bottle holds 2.5 L. Express this in cm³, dm³ and m³. Working: 2.5 L × 1000 cm³ L⁻¹ = 2500 cm³; since 1 L = 1 dm³, it is 2.5 dm³; and 2.5 L × (1 m³ ÷ 1000 L) = 2.5 × 10⁻³ m³.

Key takeaways

  • A measurement is a number plus a unit; SI has seven base units, and other units are derived from them.
  • Each SI base unit is now fixed by an exact constant of nature; NPL, New Delhi keeps India's national standards.
  • Mass is constant; weight depends on gravity.
  • 1 L = 1 dm³ = 1000 cm³; density = mass ÷ volume (1 g cm⁻³ = 1000 kg m⁻³).
  • °F = (9/5)°C + 32 and K = °C + 273.15; kelvin temperatures are never negative.

Check your understanding

  1. 1. Which is the SI unit of amount of substance?

    1. gram
    2. kilogram
    3. litre
    4. mole
    Show answer

    Answer: D. Amount of substance is one of the seven SI base quantities, and its unit is the mole (mol). The kilogram is the unit of mass and the litre is a non-SI unit of volume.

  2. 2. 25.0 cm³ of a liquid has a mass of 19.75 g. What is its density?

    1. 0.790 g cm⁻³
    2. 1.27 g cm⁻³
    3. 494 g cm⁻³
    4. 0.0790 g cm⁻³
    Show answer

    Answer: A. Density = mass ÷ volume = 19.75 g ÷ 25.0 cm³ = 0.790 g cm⁻³. Dividing volume by mass (25.0 ÷ 19.75 ≈ 1.27) or multiplying the two gives the wrong quantity.

  3. 3. A liquid boils at 350.15 K. What is this temperature on the Fahrenheit scale?

    1. 77 °F
    2. 138.6 °F
    3. 170.6 °F
    4. 662.27 °F
    Show answer

    Answer: C. First convert to Celsius: 350.15 − 273.15 = 77 °C. Then °F = (9/5)(77) + 32 = 138.6 + 32 = 170.6 °F. Forgetting the +32 gives 138.6, and putting the kelvin value straight into the formula is wrong.

  4. 4. Assertion (A): Temperatures on the Kelvin scale can be negative. Reason (R): A temperature in kelvin equals the Celsius temperature plus 273.15.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. A is false: 0 K is the lowest possible temperature, so no kelvin temperature is negative (−273.15 °C corresponds to 0 K). R is true: K = °C + 273.15.

  5. 5. Which of the following is equal to 1 dm³?

    1. 1 mL
    2. 1 L
    3. 1 m³
    4. 100 cm³
    Show answer

    Answer: B. 1 dm = 10 cm, so 1 dm³ = 10 cm × 10 cm × 10 cm = 1000 cm³, which is 1 L. One millilitre is 1 cm³, and 1 m³ is 1000 L.

Privacy · Terms · Refunds · Delivery