• Foundation
  • About 16 min
  • 5 practice questions

Relief of the ocean floor: shelf, slope, deep sea plain and trenches

Describe the four major divisions of the ocean floor with their gradients, widths and depths as the textbook gives them, explain the importance of shelves and trenches, and identify divisions from soundings.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the five oceans and state the depth range of most of the ocean floor.
  • Describe the continental shelf, continental slope, deep sea plain and oceanic deeps with their dimensions.
  • Explain why shelves are economically important and trenches matter for plate movements.

The ocean floor is not a flat bowl. Hidden under the water are the world's largest mountain ranges, its deepest trenches and its largest plains. Like the landforms of the continents, they are produced by tectonic, volcanic and depositional processes.

The oceans

The oceans occupy the great depressions of the earth's outer layer. Unlike the continents, they merge naturally into one another, so they are hard to separate. Geographers divide the oceanic part of the earth into five oceans: the Pacific, Atlantic, Indian, Southern and Arctic. Seas, bays, gulfs and other inlets are parts of these. A major part of the ocean floor lies 3 to 6 km below sea level.

The four major divisions

Major divisions of the ocean floor
DivisionGradientDepthOther features (textbook)
Continental shelfAverage 1° or even lessAs shallow as 30 m in places, as deep as 600 m in othersAverage width about 80 km; almost absent off Chile and west Sumatra; Siberian shelf in the Arctic is the largest, up to 1,500 km wide; ends at the shelf break
Continental slope2° to 5°200 m to 3,000 mJoins shelf to ocean basin; marks the end of the continents; canyons and trenches occur
Deep sea plainGently sloping3,000 m to 6,000 mFlattest and smoothest regions of the world; covered with fine clay and silt
Oceanic deeps (trenches)Steep-sided, narrow basinsAbout 3-5 km deeper than the surrounding floorAt bases of continental slopes and along island arcs; active volcanoes and strong earthquakes

A cross-section from coast to deep ocean

  1. Coast The land meets the sea.
  2. Continental shelf Shallow, gentle (1° or less), about 80 km wide on average.
  3. Shelf break The sharp edge where the steep slope begins.
  4. Continental slope Steeper (2°-5°), 200-3,000 m deep; the end of the continent.
  5. Deep sea plain Flat, 3,000-6,000 m deep, covered in fine sediment.
  6. Oceanic deep or trench Narrow, steep, 3-5 km deeper than the surrounding floor.

The continental shelf

The continental shelf is the extended margin of each continent, occupied by relatively shallow seas and gulfs. It is the shallowest part of the ocean. Shelves are covered with sediments of varying thickness, brought from the land by rivers, glaciers and wind and spread by waves and currents. Massive sedimentary deposits received over a long time become a source of fossil fuels, which is why shelves are economically important.

Oceanic deeps

Trenches are the deepest parts of the oceans. Because they lie along island arcs and at the bases of continental slopes and are associated with active volcanoes and strong earthquakes, they are very significant in the study of plate movements. According to the textbook, 57 deeps have been explored: 32 in the Pacific, 19 in the Atlantic and 6 in the Indian Ocean.

Ocean floor divisions in order from the coast: continental shelf (shallowest, 1° or less), continental slope (2°-5°, 200-3,000 m), deep sea plain (3,000-6,000 m, flattest), oceanic deeps (trenches, 3-5 km deeper than their surroundings).

Worked example 1: identify the division from a sounding

A survey ship (made-up data) records: point 1 at 120 m on a nearly level floor 40 km from the coast; point 2 at 1,800 m where the floor drops steeply; point 3 at 4,500 m on a very flat floor covered with fine clay; point 4 at 9,000 m in a narrow, steep-sided depression near an arc of volcanic islands. Working: point 1 = continental shelf (shallow, gentle, near the coast); point 2 = continental slope (200-3,000 m, steep); point 3 = deep sea plain (3,000-6,000 m, flat, clay); point 4 = trench (narrow, steep, much deeper than the plain, beside an island arc).

Worked example 2: share of explored deeps

Using the textbook's count, what percentage of the 57 explored deeps lie in the Pacific? Working: 32 ÷ 57 × 100 ≈ 56 per cent. The Atlantic has 19 ÷ 57 × 100 ≈ 33 per cent and the Indian Ocean 6 ÷ 57 × 100 ≈ 11 per cent. Check: 56 + 33 + 11 = 100. The Pacific's large share fits its many island arcs and active plate margins.

Worked example 3: how deep is a trench?

A deep sea plain lies at 5,500 m (illustrative). If a trench nearby is 3-5 km deeper than its surroundings, what depth range would you expect for the trench floor? Working: 5,500 + 3,000 = 8,500 m and 5,500 + 5,000 = 10,500 m, so about 8,500 to 10,500 m.

Key takeaways: the five oceans are the Pacific, Atlantic, Indian, Southern and Arctic, and most of the ocean floor lies 3-6 km deep. The continental shelf is the shallow, gentle margin of the continent (about 80 km wide on average, up to 1,500 km in the Siberian shelf), rich in sediments that become fossil fuels. The continental slope (2°-5°, 200-3,000 m) marks the end of the continent; the deep sea plain (3,000-6,000 m) is the flattest region on earth; trenches are narrow and 3-5 km deeper than their surroundings, linked to volcanoes, earthquakes and plate movements.

Check your understanding

  1. 1. The shallowest part of the ocean, the extended margin of a continent, is the:

    1. continental slope
    2. continental shelf
    3. deep sea plain
    4. oceanic deep
    Show answer

    Answer: B. The continental shelf is the extended margin of each continent, occupied by shallow seas and gulfs, with a gradient of 1° or less.

  2. 2. According to the textbook, the depth of the continental slope region varies between:

    1. 200 and 3,000 m
    2. 30 and 600 m
    3. 3,000 and 6,000 m
    4. 6,000 and 11,000 m
    Show answer

    Answer: A. The continental slope lies between about 200 and 3,000 m. 30-600 m describes shelf depths, and 3,000-6,000 m the deep sea plains.

  3. 3. The flattest and smoothest regions of the world, covered with fine clay and silt, are the:

    1. continental shelves
    2. mid-oceanic ridges
    3. trenches
    4. deep sea plains
    Show answer

    Answer: D. Deep sea plains, at 3,000-6,000 m, are the flattest and smoothest regions of the world and are covered with fine-grained sediments.

  4. 4. Assertion (A): Oceanic trenches are important in the study of plate movements. Reason (R): Trenches lie along island arcs and at the bases of continental slopes and are associated with active volcanoes and strong earthquakes.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true and R explains A: volcanoes and earthquakes along trenches mark active plate boundaries, so trenches reveal how plates move.

  5. 5. Read the case: An oil company explores the sea floor 50 km off a coast, in water 150 m deep, where thick layers of sediment from rivers have built up over a long time. Which division is it exploring, and why is it promising?

    1. The deep sea plain, because fine clay holds oil
    2. A trench, because volcanoes create oil
    3. The continental shelf, because massive sediments deposited over a long time become a source of fossil fuels
    4. The continental slope, because it marks the end of the continent
    Show answer

    Answer: C. Shallow water near the coast with thick river-borne sediments is the continental shelf; long-accumulated shelf sediments are a source of fossil fuels.

Privacy · Terms · Refunds · Delivery