• Foundation
  • About 18 min
  • 5 practice questions

Salinity of ocean waters: factors, distribution and the halocline

Define salinity in parts per thousand, explain the factors that raise or lower it, describe the textbook's examples of horizontal distribution, and explain the halocline and stratification by salinity.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define salinity, express it in parts per thousand and state the limit for brackish water.
  • Explain how evaporation, precipitation, rivers, ice, wind and currents change salinity, with examples.
  • Describe the horizontal and vertical distribution of salinity and the halocline.

All natural water, even rainwater, contains some dissolved mineral salts. In the oceans the amount is large enough to shape the water's density and movement. That amount is measured as salinity.

What salinity is

Salinity is the total content of dissolved salts in sea water. It is calculated as the amount of salt in grams dissolved in 1,000 g (1 kg) of sea water, and is usually expressed in parts per thousand (‰ or ppt). A salinity of 24.7‰ is taken as the upper limit for 'brackish water'.

Salinity = grams of dissolved salt in 1,000 g of sea water, written in parts per thousand (‰). The normal open ocean has 33‰ to 37‰; water up to 24.7‰ is treated as brackish.

Factors affecting salinity

Factors that change salinity

  • Evaporation and precipitation Mainly control surface salinity: evaporation raises it, rain lowers it.
  • Fresh water from rivers Lowers salinity in coastal regions.
  • Freezing and thawing of ice Change salinity in polar regions.
  • Wind Transfers water to other areas.
  • Ocean currents Carry more or less saline water; salinity, temperature and density are interrelated.

Horizontal distribution

  • The normal open ocean ranges between 33‰ and 37‰.
  • The land-locked Red Sea reaches about 41‰; in estuaries and the Arctic salinity fluctuates seasonally from 0 to 35‰; in hot, dry regions with high evaporation it sometimes reaches 70‰.
  • Pacific: variation is mainly due to its shape and large area. Salinity falls from 35‰ to 31‰ in the western parts of the northern hemisphere because of melt water from the Arctic; after 15°-20° S it falls to 33‰.
  • Atlantic: average about 36‰; highest between 15° and 20° latitudes; maximum about 37‰ between 20° N-30° N and 20° W-60° W, decreasing northward.
  • Indian Ocean: average 35‰; low in the Bay of Bengal (river inflow), higher in the Arabian Sea (high evaporation, little fresh water).
Examples of salinity and their reasons
Water bodySalinityReason (textbook)
North SeaHigher, despite high latitudeMore saline water brought by the North Atlantic Drift
Baltic SeaLowLarge inflow of river water
Mediterranean SeaHigherHigh evaporation
Black SeaVery lowEnormous fresh-water inflow from rivers
Lake Van (Turkey)330‰Among the highest salinities of any water body
Dead Sea238‰Very high salinity
Great Salt Lake220‰Very high salinity

Vertical distribution

Salinity changes with depth, but how it changes depends on location. At the surface, salinity rises when water is lost to ice or evaporation and falls when fresh water from rivers is added. At depth, salinity is very much fixed, because there is no way for water to be lost or salt to be added. So there is a marked difference between surface and deep zones. Lower-salinity water rests above higher-salinity, denser water. Salinity generally increases with depth, and there is a distinct zone called the halocline where it increases sharply. Other factors being constant, higher salinity means higher density, so high-salinity water generally sinks below lower-salinity water. This leads to stratification by salinity.

From evaporation to stratification

  1. Evaporation removes water Salt stays behind, so surface salinity rises.
  2. Density increases Saltier water is denser, other factors being constant.
  3. Dense water sinks It moves below less saline water.
  4. Layers form Less saline water above, more saline water below, with a halocline between: stratification.

Worked example 1: calculating salinity

A 2 kg sample of sea water is evaporated and leaves 70 g of salt (illustrative). Working: salt per 1,000 g = 70 ÷ 2 = 35 g, so salinity = 35‰, typical of the open ocean. A 500 g sample from an estuary leaves 6 g of salt: per 1,000 g = 6 × 2 = 12 g, so 12‰, which is below 24.7‰ and therefore brackish.

Worked example 2: explain the contrast

Why is the Arabian Sea saltier than the Bay of Bengal, though both are parts of the Indian Ocean at similar latitudes? Reasoning: (1) the Bay of Bengal receives a large inflow of fresh river water, which dilutes it; (2) the Arabian Sea has high evaporation and little fresh-water inflow, which concentrates salt. Same ocean, opposite balance of inputs, so opposite salinity.

Worked example 3: a source-based question

A made-up data card lists: Sea P, enclosed, in a hot dry region with few rivers: 40‰. Sea Q, enclosed, fed by many large rivers in a cool region: 17‰. Sea R, open ocean in the subtropics: 36‰. Interpret. Working: P is high because evaporation exceeds fresh-water input (like the Red Sea or Mediterranean); Q is low, indeed brackish (below 24.7‰), because rivers dilute it (like the Baltic or Black Sea); R lies within the normal open-ocean range of 33-37‰.

Key takeaways: salinity is grams of salt per 1,000 g of sea water, in ‰; 24.7‰ is the upper limit of brackish water and the open ocean has 33-37‰. Evaporation and ice formation raise it; rain, rivers and melting ice lower it; wind and currents move it. Examples: Red Sea about 41‰, Mediterranean high, Baltic and Black Sea low, North Sea raised by the North Atlantic Drift; Indian Ocean average 35‰ (Bay of Bengal low, Arabian Sea high); Atlantic average about 36‰. Salinity generally rises with depth, sharply in the halocline, and denser saline water sinks, stratifying the ocean.

Check your understanding

  1. 1. Salinity is expressed as grams of dissolved salt in:

    1. 100 g of sea water
    2. 10 g of sea water
    3. 10,000 g of sea water
    4. 1,000 g of sea water
    Show answer

    Answer: D. Salinity is the amount of salt in grams dissolved in 1,000 g (1 kg) of sea water, expressed as parts per thousand.

  2. 2. A 4 kg sample of sea water contains 132 g of dissolved salt (illustrative). Its salinity is:

    1. 13.2‰
    2. 33‰
    3. 132‰
    4. 3.3‰
    Show answer

    Answer: B. Salt per 1,000 g = 132 ÷ 4 = 33 g, so the salinity is 33‰.

  3. 3. The Baltic Sea has low salinity mainly because of:

    1. the North Atlantic Drift
    2. high evaporation
    3. a large inflow of river water
    4. upwelling of deep water
    Show answer

    Answer: C. The Baltic receives a large influx of river water, which dilutes it. The North Atlantic Drift raises salinity in the North Sea, and high evaporation raises it in the Mediterranean.

  4. 4. Assertion (A): Salinity at great depth in the ocean stays nearly fixed. Reason (R): At depth there is no way for water to be lost or salt to be added.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true and R explains A: evaporation, ice formation, rain and rivers act only at the surface, so deep water keeps a steady salinity.

  5. 5. Read the case: A diver's instruments show salinity rising very sharply over a short depth range, with less saline water above and more saline, denser water below. This zone is the:

    1. halocline
    2. thermocline
    3. shelf break
    4. estuary
    Show answer

    Answer: A. A zone where salinity increases sharply with depth is the halocline; the less saline water rests above the denser saline water, a sign of stratification by salinity.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Water (Oceans)

Privacy · Terms · Refunds · Delivery