- Foundation
- About 18 min
- 5 practice questions
Earthquakes, earthquake waves and shadow zones
Explain why the earth shakes, define focus and epicentre, compare P, S and surface waves and how they propagate, and use shadow zones to explain what earthquake waves reveal about the interior.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how energy released along a fault causes an earthquake, and define focus and epicentre.
- Compare P-waves, S-waves and surface waves in speed, the media they pass through and their vibrations.
- Describe the P-wave and S-wave shadow zones and what they reveal.
An earthquake, in simple words, is a shaking of the earth. It is a natural event caused by the release of energy, which generates waves that travel in all directions. Studying these waves gives the most complete picture of the earth's layered interior.
Why does the earth shake?
The energy is released along a fault, a sharp break in the crustal rocks. Rocks on either side of a fault tend to move in opposite directions, but the weight of the overlying rock strata presses on them and friction locks them together. At some point their tendency to move overcomes the friction: the blocks are deformed and then slide past one another abruptly. This releases energy, and energy waves travel in all directions.
How an earthquake happens
- Fault A sharp break in crustal rocks; blocks tend to move in opposite directions.
- Locking Pressure of overlying rock and friction lock the blocks.
- Strain builds The tendency to move grows; blocks deform.
- Sudden slip Friction is overcome; blocks slide past each other abruptly.
- Energy released Waves travel in all directions from the focus.
The point where the energy is released is the focus, also called the hypocentre. The point on the surface nearest to the focus, directly above it, is the epicentre; it is the first to experience the waves. All natural earthquakes take place in the lithosphere, which here means the part of the earth up to a depth of 200 km from the surface.
Focus (hypocentre): where energy is released inside the earth. Epicentre: the point on the surface directly above the focus, the first to feel the waves.
Types of earthquake waves
A seismograph records the waves that reach the surface. Its record shows three distinct sections, one for each kind of wave pattern. Earthquake waves are basically of two types: body waves and surface waves. Body waves are generated by the release of energy at the focus and travel in all directions through the body of the earth. When body waves interact with surface rocks they generate a new set of waves, the surface waves, which move along the surface.
The velocity of waves changes as they pass through materials of different density: the denser the material, the higher the velocity. Their direction also changes as they reflect (rebound) or refract (bend into a different direction) at materials of different density. These changes are inferred from seismograph records.
| Feature | P-waves | S-waves | Surface waves |
|---|---|---|---|
| Other name | Primary waves | Secondary waves | Long or surface waves |
| Arrival at seismograph | First (fastest) | After a time lag | Last |
| Media they travel through | Solid, liquid and gas (like sound waves) | Solids only | Along the surface |
| Vibration | Parallel to the direction of the wave: stretching and squeezing | Perpendicular to the wave direction in the vertical plane: crests and troughs | Perpendicular to the direction of propagation |
| Damage | Less | Less | Most damaging: displace rocks and collapse structures |
How the waves travel through rock
As the waves propagate they make the rocks vibrate. P-waves vibrate parallel to the direction of the wave. They exert pressure on the material in the direction of travel, creating density differences that stretch and squeeze the material. The other waves vibrate perpendicular to the direction of propagation. S-waves vibrate perpendicular to the wave direction in the vertical plane, so they create troughs and crests in the material. Surface waves are the most damaging.
Shadow zones
Seismographs far from an earthquake record its waves, but in some areas the waves are not recorded. Such an area is a shadow zone, and every earthquake has its own shadow zone, depending on where the epicentre is. Observations show:
- Seismographs within 105° of the epicentre record both P- and S-waves.
- Seismographs beyond 145° record P-waves but not S-waves.
- So the zone between 105° and 145° is a shadow zone for both types of wave; the P-wave shadow zone appears as a band around the earth between 105° and 145° from the epicentre.
- The entire area beyond 105° receives no S-waves, so the S-wave shadow zone is much larger: a little over 40 per cent of the earth's surface.
Shadow zones
-
P-wave shadow zone
- A band from 105° to 145° from the epicentre
- P-waves are recorded again beyond 145°
- Caused by the waves changing direction inside the earth
-
S-wave shadow zone
- Everything beyond 105° from the epicentre
- A little over 40 per cent of the earth's surface
- S-waves travel only through solids
Why does this matter? S-waves travel only through solids. That they are not received beyond 105° tells scientists that a liquid layer lies deep inside the earth and blocks them; this is how earthquake waves helped reveal the liquid outer core, which you meet in lesson 4.
Worked example 1: time lag between P and S waves
Suppose (illustrative speeds only) P-waves travel at 6 km/s and S-waves at 3.5 km/s through the crust, and a seismograph is 420 km from the focus. Find the time lag. Working: P arrival = 420 ÷ 6 = 70 s; S arrival = 420 ÷ 3.5 = 120 s. Lag = 120 − 70 = 50 s. Answer: the S-waves arrive 50 seconds after the P-waves. A longer lag means a more distant earthquake, which is how the time lag helps locate earthquakes.
Worked example 2: will the station record S-waves?
Three made-up stations lie 60°, 120° and 160° from an epicentre. Which waves does each record? Reasoning: within 105° both arrive; between 105° and 145° neither body wave arrives directly; beyond 145° only P-waves arrive. Answer: 60°: P and S; 120°: neither (shadow zone of both); 160°: P only, no S.
Key takeaways: earthquakes occur when blocks locked along a fault slide abruptly and release energy. The focus (hypocentre) is where energy is released; the epicentre is directly above it on the surface. Body waves (P and S) travel through the earth and generate surface waves. P-waves are fastest, pass through solids, liquids and gases, and vibrate parallel to their direction; S-waves pass only through solids and vibrate perpendicular; surface waves arrive last and do most damage. The P-wave shadow zone is 105°-145°; the S-wave shadow zone is everything beyond 105°, a little over 40 per cent of the surface.
Check your understanding
-
1. Which one of the following earthquake waves is the most destructive?
- P-waves
- S-waves
- Surface waves
- Primary waves
Show answer
Answer: C. Surface waves arrive last but cause displacement of rocks and collapse of structures, so they are the most damaging.
-
2. The point on the earth's surface directly above the focus of an earthquake is the:
- epicentre
- hypocentre
- fault
- shadow zone
Show answer
Answer: A. The focus (hypocentre) is where energy is released; the epicentre is the surface point directly above it and the first to experience the waves.
-
3. S-waves can travel only through:
- gases
- liquids
- liquids and gases
- solids
Show answer
Answer: D. The chapter stresses that S-waves can travel only through solid materials, which has helped scientists understand the interior.
-
4. A seismograph 130° from the epicentre of an earthquake will record:
- both P- and S-waves
- neither P- nor S-waves arriving directly
- only S-waves
- only P-waves
Show answer
Answer: B. 130° lies in the band from 105° to 145°, which is the shadow zone for both P- and S-waves.
-
5. Assertion (A): The shadow zone of S-waves is much larger than that of P-waves.
Reason (R): S-waves cannot pass through liquids, so no S-waves are received anywhere beyond 105° from the epicentre.- A is true but R is false.
- Both A and R are true, and R is the correct explanation of A.
- A is false but R is true.
- Both A and R are false.
Show answer
Answer: B. S-waves pass only through solids; they are blocked so that the whole area beyond 105° receives none, over 40 per cent of the surface, while the P-wave shadow is only the 105°-145° band. R explains A.
Sign in to keep track of the lessons you finish.