• Foundation
  • About 16 min
  • 5 practice questions

Types, measurement and effects of earthquakes

Classify earthquakes into tectonic, volcanic, collapse, explosion and reservoir-induced types, compare the Richter and Mercalli scales, and explain the hazardous effects of earthquakes, tsunamis and their frequency.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Classify earthquakes by their cause into five types.
  • Compare magnitude (Richter scale) with intensity (Mercalli scale).
  • List the immediate hazardous effects of earthquakes and explain when a tsunami occurs.

Not all earthquakes have the same cause, and not all are equally dangerous. This lesson classifies earthquakes, shows how they are measured and lists the hazards they bring.

Types of earthquakes

Types of earthquakes by cause

  • Tectonic earthquakes The most common type: sliding of rocks along a fault plane.
  • Volcanic earthquakes A special class of tectonic earthquakes, confined to areas of active volcanoes.
  • Collapse earthquakes Minor tremors when roofs of underground mines collapse in areas of intense mining.
  • Explosion earthquakes Ground shaking caused by the explosion of chemical or nuclear devices.
  • Reservoir induced earthquakes Earthquakes that occur in areas of large reservoirs.

Note that the first two are natural tectonic events, while collapse, explosion and reservoir-induced earthquakes are linked to human activity: mining, explosions and the building of large reservoirs.

Measuring earthquakes

Earthquakes are scaled either by their magnitude or by the intensity of the shock.

Two ways to measure an earthquake

  • Magnitude: Richter scale
    • Relates to the energy released
    • Expressed in numbers 0-10
    • One value for an earthquake
  • Intensity: Mercalli scale
    • Named after Mercalli, an Italian seismologist
    • Based on visible damage caused
    • Range 1-12

Richter scale: magnitude, the energy released, 0-10. Mercalli scale: intensity, the visible damage, 1-12.

Effects of earthquakes

An earthquake is a natural hazard. Its immediate hazardous effects are:

  1. Ground shaking
  2. Differential ground settlement
  3. Land and mud slides
  4. Soil liquefaction
  5. Ground lurching
  6. Avalanches
  7. Ground displacement
  8. Floods from dam and levee failures
  9. Fires
  10. Structural collapse
  11. Falling objects
  12. Tsunami

The first six have some bearing on landforms, while the others are effects of immediate concern to the life and property of people in the region.

Grouping the effects

  • Bearing on landforms
    • Ground shaking
    • Differential ground settlement
    • Land and mud slides
    • Soil liquefaction
    • Ground lurching
    • Avalanches
  • Immediate concern to life and property
    • Ground displacement
    • Floods from dam and levee failures
    • Fires
    • Structural collapse
    • Falling objects
    • Tsunami

Tsunamis

A tsunami occurs only if the epicentre is below oceanic waters and the magnitude is sufficiently high. Tsunamis are waves generated by the tremors, not an earthquake in themselves. Although the shaking itself lasts only a few seconds, its effects are devastating if the magnitude is more than 5 on the Richter scale.

How an undersea earthquake leads to a tsunami

  1. Undersea epicentre Energy is released below oceanic waters.
  2. High magnitude A strong enough tremor disturbs the sea floor and water.
  3. Tsunami waves The tremor generates waves in the ocean.
  4. Coastal impact The waves reach coasts, threatening life and property.

Frequency of earthquakes

A tremor of high magnitude can cause heavy damage to life and property, but not every part of the globe experiences major shocks. Earthquakes of high magnitude (8+) are quite rare, occurring once in 1-2 years, whereas tiny ones occur almost every minute. The distribution of earthquakes and volcanoes is discussed in the next chapter.

Worked example 1: classify the tremor

Classify each made-up event: (i) the ground shakes after the roof of a deep coal mine caves in; (ii) tremors begin in an area after a very large dam fills its reservoir; (iii) rocks slip suddenly along a fault plane; (iv) the ground shakes near an erupting volcano. Answers with reasons: (i) collapse earthquake, a mine roof collapse; (ii) reservoir induced, linked to a large reservoir; (iii) tectonic, sliding along a fault; (iv) volcanic, a special tectonic type confined to active volcanoes.

Worked example 2: magnitude or intensity?

Two made-up reports describe one earthquake: report A gives a single number from the energy released; report B gives a higher value in a crowded town where many walls fell and a lower value in a village far away where only hanging lamps swung. Reasoning: a value based on energy is magnitude (Richter, 0-10) and is the same for the event; a value based on visible damage is intensity (Mercalli, 1-12) and can differ from place to place. Answer: report A uses the Richter scale; report B uses the Mercalli scale.

Key takeaways: earthquakes are tectonic (most common), volcanic, collapse, explosion or reservoir induced. Magnitude (Richter, 0-10) measures energy; intensity (Mercalli, 1-12) measures visible damage. Earthquakes cause twelve kinds of immediate hazard; the first six bear on landforms. A tsunami needs an undersea epicentre and a high magnitude and is a wave caused by the tremor. Quakes above magnitude 5 can be devastating; 8+ quakes are rare (once in 1-2 years), while tiny ones occur almost every minute.

Check your understanding

  1. 1. The most common type of earthquake is the:

    1. collapse earthquake
    2. explosion earthquake
    3. reservoir induced earthquake
    4. tectonic earthquake
    Show answer

    Answer: D. The chapter says tectonic earthquakes, generated by the sliding of rocks along a fault plane, are the most common.

  2. 2. The Mercalli scale measures the earthquake's:

    1. intensity, based on visible damage, from 1 to 12
    2. magnitude, based on energy released, from 0 to 10
    3. depth of the focus
    4. distance from the epicentre
    Show answer

    Answer: A. The Mercalli intensity scale takes into account the visible damage and ranges from 1 to 12; the Richter scale measures magnitude.

  3. 3. Minor tremors caused when the roofs of underground mines cave in are called:

    1. volcanic earthquakes
    2. collapse earthquakes
    3. tectonic earthquakes
    4. explosion earthquakes
    Show answer

    Answer: B. In areas of intense mining, roofs of underground mines sometimes collapse, causing minor tremors called collapse earthquakes.

  4. 4. A tsunami is generated only when:

    1. the epicentre is on land and the quake is small
    2. a volcano erupts on land
    3. the epicentre is below oceanic waters and the magnitude is sufficiently high
    4. a dam fails
    Show answer

    Answer: C. The chapter states that a tsunami occurs only if the epicentre is below oceanic waters and the magnitude is high enough.

  5. 5. According to the textbook, earthquakes of magnitude 8 and above occur about:

    1. almost every minute
    2. once in 1-2 years
    3. every day
    4. once in a hundred years
    Show answer

    Answer: B. High-magnitude (8+) quakes are quite rare, about once in 1-2 years, while tiny ones occur almost every minute.

Privacy · Terms · Refunds · Delivery