Revision notes

Chapter 3 Interior of the Earth: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

How we know about the earth's interior: direct and indirect sources

Sources of information about the interior

  • Direct sources
    • Surface rocks and rocks from mines
    • Deep drilling projects
    • Material thrown out in volcanic eruptions
  • Indirect sources
    • Change of temperature, pressure and density with depth
    • Meteors
    • Gravitation (gravity anomaly)
    • Magnetic field (magnetic surveys)
    • Seismic activity (earthquake waves)
Indirect sources and what each reveals
Indirect sourceWhat it tells us
Temperature, pressure, density with depthEstimated values at different depths
MeteorsLikely materials and structure, since meteors formed from similar material
Gravity anomalyDistribution of mass in the crust
Magnetic surveysDistribution of magnetic materials in the crust
Seismic wavesThe layered structure of the whole interior

Direct sources: mines, drilling and volcanic material. Indirect sources: temperature, pressure and density with depth, meteors, gravity anomalies, magnetic surveys and, most important, seismic waves.

Key takeaways: the earth's radius is about 6,378 km, and our knowledge of the interior is mostly inferred. Direct sources are surface and mine rocks (gold mines in South Africa are 3-4 km deep), deep drilling (12 km at Kola, according to the textbook) and volcanic magma, whose source depth is uncertain. Indirect sources are temperature, pressure and density rising with depth, meteors, gravity anomalies, magnetic surveys and, most importantly, seismic waves.

Read the full lesson

Lesson 2

Earthquakes, earthquake waves and shadow zones

How an earthquake happens

  1. Fault A sharp break in crustal rocks; blocks tend to move in opposite directions.
  2. Locking Pressure of overlying rock and friction lock the blocks.
  3. Strain builds The tendency to move grows; blocks deform.
  4. Sudden slip Friction is overcome; blocks slide past each other abruptly.
  5. Energy released Waves travel in all directions from the focus.

Focus (hypocentre): where energy is released inside the earth. Epicentre: the point on the surface directly above the focus, the first to feel the waves.

Comparing earthquake waves
FeatureP-wavesS-wavesSurface waves
Other namePrimary wavesSecondary wavesLong or surface waves
Arrival at seismographFirst (fastest)After a time lagLast
Media they travel throughSolid, liquid and gas (like sound waves)Solids onlyAlong the surface
VibrationParallel to the direction of the wave: stretching and squeezingPerpendicular to the wave direction in the vertical plane: crests and troughsPerpendicular to the direction of propagation
DamageLessLessMost damaging: displace rocks and collapse structures

Shadow zones

  • P-wave shadow zone
    • A band from 105° to 145° from the epicentre
    • P-waves are recorded again beyond 145°
    • Caused by the waves changing direction inside the earth
  • S-wave shadow zone
    • Everything beyond 105° from the epicentre
    • A little over 40 per cent of the earth's surface
    • S-waves travel only through solids

Key takeaways: earthquakes occur when blocks locked along a fault slide abruptly and release energy. The focus (hypocentre) is where energy is released; the epicentre is directly above it on the surface. Body waves (P and S) travel through the earth and generate surface waves. P-waves are fastest, pass through solids, liquids and gases, and vibrate parallel to their direction; S-waves pass only through solids and vibrate perpendicular; surface waves arrive last and do most damage. The P-wave shadow zone is 105°-145°; the S-wave shadow zone is everything beyond 105°, a little over 40 per cent of the surface.

Read the full lesson

Lesson 3

Types, measurement and effects of earthquakes

Types of earthquakes by cause

  • Tectonic earthquakes The most common type: sliding of rocks along a fault plane.
  • Volcanic earthquakes A special class of tectonic earthquakes, confined to areas of active volcanoes.
  • Collapse earthquakes Minor tremors when roofs of underground mines collapse in areas of intense mining.
  • Explosion earthquakes Ground shaking caused by the explosion of chemical or nuclear devices.
  • Reservoir induced earthquakes Earthquakes that occur in areas of large reservoirs.

Two ways to measure an earthquake

  • Magnitude: Richter scale
    • Relates to the energy released
    • Expressed in numbers 0-10
    • One value for an earthquake
  • Intensity: Mercalli scale
    • Named after Mercalli, an Italian seismologist
    • Based on visible damage caused
    • Range 1-12

Richter scale: magnitude, the energy released, 0-10. Mercalli scale: intensity, the visible damage, 1-12.

Grouping the effects

  • Bearing on landforms
    • Ground shaking
    • Differential ground settlement
    • Land and mud slides
    • Soil liquefaction
    • Ground lurching
    • Avalanches
  • Immediate concern to life and property
    • Ground displacement
    • Floods from dam and levee failures
    • Fires
    • Structural collapse
    • Falling objects
    • Tsunami

How an undersea earthquake leads to a tsunami

  1. Undersea epicentre Energy is released below oceanic waters.
  2. High magnitude A strong enough tremor disturbs the sea floor and water.
  3. Tsunami waves The tremor generates waves in the ocean.
  4. Coastal impact The waves reach coasts, threatening life and property.

Key takeaways: earthquakes are tectonic (most common), volcanic, collapse, explosion or reservoir induced. Magnitude (Richter, 0-10) measures energy; intensity (Mercalli, 1-12) measures visible damage. Earthquakes cause twelve kinds of immediate hazard; the first six bear on landforms. A tsunami needs an undersea epicentre and a high magnitude and is a wave caused by the tremor. Quakes above magnitude 5 can be devastating; 8+ quakes are rare (once in 1-2 years), while tiny ones occur almost every minute.

Read the full lesson

Lesson 4

Structure of the earth: crust, mantle and core, and what a volcano is

Layers of the earth
LayerDepth or thickness (textbook)State and notes
Oceanic crustMean 5 kmSolid, brittle, thinner
Continental crustAround 30 km; up to 70 km in the Himalayan regionSolid, brittle, thicker under mountains
Lithosphere10-200 kmCrust plus the uppermost mantle
AsthenosphereUpper mantle, up to about 400 kmWeak zone; main source of magma
Lower mantleBeyond the asthenosphere to 2,900 kmSolid
Outer coreBelow 2,900 kmLiquid; nickel and iron
Inner coreCentre of the earthSolid; nickel and iron

Layers of the earth

  • Crust Outermost, brittle
    • Oceanic: mean 5 km
    • Continental: around 30 km, 70 km under the Himalayas
  • Mantle Moho to 2,900 km
    • Asthenosphere: weak, up to 400 km, source of magma
    • Lower mantle: solid
  • Core From 2,900 km to the centre
    • Outer core: liquid
    • Inner core: solid
    • Nickel and iron: the nife layer

Crust (oceanic 5 km, continental about 30 km) - Moho - mantle to 2,900 km (asthenosphere up to 400 km) - liquid outer core - solid inner core of nickel and iron (nife).

From magma to lava

  1. Asthenosphere Weak zone of the upper mantle, source of molten rock.
  2. Magma Molten material in the upper mantle.
  3. Moving upward Once it moves towards the crust it is called lava.
  4. Eruption Lava, pyroclastic debris, bombs, ash, dust and gases reach the ground.

Key takeaways: the crust is brittle, 5 km thick under oceans and about 30 km under continents (70 km under the Himalayas). The mantle runs from the Moho to 2,900 km; its upper weak part, the asthenosphere, extends to about 400 km and supplies magma; crust plus uppermost mantle form the 10-200 km lithosphere; the lower mantle is solid. The core begins at 2,900 km: the outer core is liquid, the inner core solid, both mostly nickel and iron (nife). A volcano releases gases, ash and lava; magma becomes lava when it moves up towards or onto the surface.

Read the full lesson

Lesson 5

Types of volcanoes and volcanic landforms

Major types of volcanoes
TypeLava and eruptionForm or example
ShieldVery fluid basalt; low explosivity unless water enters the ventNot steep; largest volcanoes barring basalt flows; Hawaiian volcanoes
CompositeCooler, more viscous lava; often explosive with pyroclastics and ashLayers of material around the vent
CalderaMost explosive; huge magma chamber close byCollapsed depression, not a tall cone
Flood basaltHighly fluid lava flowing long distancesThick flows over thousands of sq km; Deccan Traps
Mid-ocean ridgeFrequent eruptions along the ridge centreRidge system over 70,000 km long in all ocean basins

Intrusive volcanic landforms

  • Batholith Large dome of magma cooled deep in the crust; granitic; exposed only after denudation removes overlying rock; cooled magma chambers.
  • Laccolith Large dome-shaped body with a level base, fed by a pipe-like conduit from below; like a buried composite-volcano dome.
  • Lapolith Saucer-shaped body, concave to the sky.
  • Phacolith Wavy mass at the base of synclines or top of anticlines, with a conduit to a magma chamber below.
  • Sill and sheet Near-horizontal bodies: thick ones are sills, thin ones are sheets.
  • Dyke Wall-like body that solidified almost perpendicular to the ground in cracks and fissures.

Fluid basalt builds gentle shields and flood basalts; viscous lava builds explosive composite cones; the most explosive eruptions collapse into calderas. Lava that cools inside the crust forms batholiths, laccoliths, lapoliths, phacoliths, sills, sheets and dykes.

Key takeaways: volcanoes are classified by eruption and form: shield (fluid basalt, gentle, e.g. Hawaii), composite (viscous lava, explosive, layered), caldera (most explosive, collapsed), flood basalt (very fluid, vast flows, e.g. the Deccan Traps) and mid-ocean ridge (ridges over 70,000 km long). Igneous rocks are volcanic if they cool at the surface and plutonic if they cool in the crust. Intrusive forms are batholiths, laccoliths, lapoliths, phacoliths, sills and sheets, and dykes; dykes in western Maharashtra fed the Deccan Traps.

Read the full lesson

Privacy · Terms · Refunds · Delivery