• Foundation
  • About 22 min
  • 5 practice questions

Resolution of vectors and the analytical method of addition

Write any vector in terms of unit vectors and components, find magnitude and direction from components, add vectors by components, and use the law of cosines for the resultant.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define a unit vector and use î, ĵ and k̂.
  • Resolve a vector into rectangular components: Ax = A cos θ, Ay = A sin θ.
  • Find a vector's magnitude and direction from its components, in two and three dimensions.
  • Add and subtract vectors by adding their components.
  • Use R² = A² + B² + 2AB cos θ and the law of sines to find a resultant.

Graphical addition is easy to picture but slow and inaccurate. Breaking each vector into pieces along fixed axes turns vector addition into ordinary arithmetic. This is the analytical method, and it is how almost all vector problems are actually solved.

Resolution along two directions

Any vector A in a plane can be written as the sum of two vectors along any two non-parallel directions a and b in that plane: A = λa + μb, where λ and μ are real numbers. This is resolving A into component vectors λa and μb. The most useful choice is along perpendicular axes, using unit vectors.

Unit vectors and rectangular components

A unit vector has magnitude 1 and points in a given direction. It has no unit and no dimensions; it only specifies a direction. The unit vectors along the x-, y- and z-axes are î, ĵ and k̂, and they are mutually perpendicular. Any vector can be written as A = A n̂, where n̂ = A/A is the unit vector along A.

If A lies in the x-y plane and makes an angle θ with the x-axis, dropping perpendiculars from its head to the axes gives A = Aₓî + A_yĵ, with Aₓ = A cos θ and A_y = A sin θ. Aₓ and A_y are the x- and y-components; they are numbers (positive, negative or zero), while Aₓî and A_yĵ are vectors. Conversely, from the components: A = √(Aₓ² + A_y²) and tan θ = A_y/Aₓ.

In three dimensions, if A makes angles α, β, γ with the x-, y- and z-axes, then Aₓ = A cos α, A_y = A cos β, A_z = A cos γ, A = Aₓî + A_yĵ + A_zk̂, and A = √(Aₓ² + A_y² + A_z²). A position vector is simply r = xî + yĵ + zk̂.

Adding vectors by components

  1. Resolve each vector Find Aₓ, A_y and Bₓ, B_y using cos and sin of each angle with the x-axis.
  2. Add like components Rₓ = Aₓ + Bₓ and R_y = A_y + B_y (subtract components to subtract vectors).
  3. Find the magnitude R = √(Rₓ² + R_y²).
  4. Find the direction tan θ = R_y/Rₓ; check the quadrant from the signs of Rₓ and R_y.

Adding vectors analytically

If A = Aₓî + A_yĵ and B = Bₓî + B_yĵ, then because vector addition is commutative and associative, R = A + B = (Aₓ + Bₓ)î + (A_y + B_y)ĵ. Each component of the sum is the sum of the corresponding components. The same works for any number of vectors and for subtraction: for T = a + b − c, Tₓ = aₓ + bₓ − cₓ, and similarly for y and z.

Magnitude of the resultant: law of cosines

For two vectors A and B with angle θ between them (drawn tail to tail), resolve B along and perpendicular to A: the components of the resultant are (A + B cos θ) along A and B sin θ perpendicular to it. Therefore R² = (A + B cos θ)² + (B sin θ)² = A² + B² + 2AB cos θ. If R makes angle α with A, then tan α = B sin θ/(A + B cos θ); equivalently, by the law of sines, R/sin θ = B/sin α. Special cases: θ = 0 gives R = A + B (largest); θ = 180° gives R = |A − B| (smallest); θ = 90° gives R = √(A² + B²). So |A − B| ≤ R ≤ A + B always.

Aₓ = A cos θ, A_y = A sin θ; A = √(Aₓ² + A_y²). R = √(A² + B² + 2AB cos θ), tan α = B sin θ/(A + B cos θ).

Worked example 1: components of a force

A force of 10 N acts at 30° above the positive x-axis. Fₓ = 10 cos 30° = 10 × 0.866 = 8.66 N; F_y = 10 sin 30° = 10 × 0.5 = 5.0 N. So F = (8.66î + 5.0ĵ) N. Check: √(8.66² + 5.0²) = √(75.0 + 25.0) = 10 N.

Worked example 2: adding by components

Add A = 3î + 4ĵ and B = 5î − 2ĵ (in metres). Step 1: Rₓ = 3 + 5 = 8; R_y = 4 + (−2) = 2. Step 2: R = √(8² + 2²) = √68 ≈ 8.25 m. Step 3: tan θ = 2/8 = 0.25, so θ ≈ 14° above the x-axis. Also |A| = 5 m and |B| = √29 ≈ 5.39 m; their sum 10.4 m is more than 8.25 m, as it must be when the vectors are not parallel.

Worked example 3: resultant of two forces at 60°

Forces of 3.0 N and 5.0 N act at a point with 60° between them. Magnitude: R² = 3.0² + 5.0² + 2(3.0)(5.0) cos 60° = 9 + 25 + 15 = 49, so R = 7.0 N. Direction: tan α = 5.0 sin 60°/(3.0 + 5.0 cos 60°) = 4.33/5.5 ≈ 0.787, so α ≈ 38° from the 3.0 N force. 3D check of a magnitude: A = 2î + 3ĵ + 6k̂ has A = √(4 + 9 + 36) = √49 = 7, and it makes angle α with the x-axis where cos α = 2/7.

Key takeaways

  • A unit vector only gives a direction; î, ĵ, k̂ point along the axes.
  • Components can be negative; magnitude and angle follow from Pythagoras and tan.
  • To add vectors, add their components axis by axis.
  • The resultant of A and B always lies between |A − B| and A + B.

Check your understanding

  1. 1. A vector of magnitude 20 units makes 60° with the x-axis. Its x-component is:

    1. 17.3 units
    2. 20 units
    3. 10 units
    4. 0
    Show answer

    Answer: C. Aₓ = A cos θ = 20 cos 60° = 20 × 0.5 = 10 units. (The y-component is 20 sin 60° ≈ 17.3 units.)

  2. 2. The magnitude of the vector 6î − 8ĵ is:

    1. 10
    2. 14
    3. 2
    4. −2
    Show answer

    Answer: A. |A| = √(Aₓ² + A_y²) = √(6² + (−8)²) = √(36 + 64) = √100 = 10. The minus sign of a component does not make the magnitude negative.

  3. 3. If A = 2î + 3ĵ and B = 4î − ĵ, then A − B is:

    1. 6î + 2ĵ
    2. −2î + 4ĵ
    3. 2î − 4ĵ
    4. −2î + 2ĵ
    Show answer

    Answer: B. Subtract component by component: (2 − 4)î + (3 − (−1))ĵ = −2î + 4ĵ.

  4. 4. Two forces of 6 N and 8 N act at a point. Which of these CANNOT be the magnitude of their resultant?

    1. 2 N
    2. 10 N
    3. 14 N
    4. 16 N
    Show answer

    Answer: D. The resultant always lies between |A − B| = 2 N and A + B = 14 N. 2 N (opposite), 10 N (at 90°) and 14 N (same direction) are possible, but 16 N is more than 14 N and is impossible.

  5. 5. Assertion (A): A unit vector has no unit and no dimensions. Reason (R): A unit vector is obtained by dividing a vector by its own magnitude.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. n̂ = A/|A|: the units and dimensions of A cancel with those of its magnitude, leaving a pure direction of size 1. So R explains A.

Privacy · Terms · Refunds · Delivery