- Foundation
- About 20 min
- 5 practice questions
Uniform circular motion and centripetal acceleration
Show that a body moving in a circle at constant speed accelerates towards the centre, derive a = v²/R, and relate linear speed, angular speed, period and frequency.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why uniform circular motion is accelerated motion.
- Derive the magnitude v²/R and the direction of centripetal acceleration.
- Define angular displacement and angular speed, and use v = Rω.
- Relate ω, T and ν: ω = 2π/T = 2πν, and write a = ω²R = 4π²ν²R.
- Explain why centripetal acceleration is not a constant vector.
A stone whirled on a string, a car going round a circular track at steady speed, a point on a rotating fan blade: each moves in a circle at constant speed. This is uniform circular motion. 'Uniform' refers to the speed only. The direction of the velocity changes all the time, so the velocity is changing and the body is accelerating, even though its speed is constant.
Direction of the acceleration
Let a body move with speed v in a circle of radius R, centre C. At P its position vector (from C) is r and its velocity v is along the tangent; a short time Δt later, at P′, they are r′ and v′. Because the velocity at each point is tangent to the circle, v is perpendicular to r and v′ is perpendicular to r′. Draw v and v′ from a common point: Δv = v′ − v is then perpendicular to Δr. As Δt → 0, Δr lines up with the tangent and Δv points along the radius towards the centre. So the acceleration of a body in uniform circular motion is directed towards the centre at every point. Newton called it centripetal ('centre-seeking') acceleration.
Magnitude: a = v²/R
The angle between r and r′ is Δθ. Since each velocity is perpendicular to its position vector, the angle between v and v′ is also Δθ. The triangle formed by r, r′ and Δr and the triangle formed by v, v′ and Δv are therefore similar isosceles triangles, so |Δv|/v = |Δr|/R, i.e. |Δv| = (v/R)|Δr|. Dividing by Δt and letting Δt → 0: a = (v/R) × lim |Δr|/Δt. For a very small Δt the chord PP′ equals the arc, so |Δr| ≈ vΔt and lim |Δr|/Δt = v. Hence a_c = v²/R. Both v and R are constant, so the magnitude is constant; but the direction keeps turning, always towards the centre, so the centripetal acceleration is not a constant vector. A careful analysis of this acceleration was first published by Christiaan Huygens in 1673.
Why a body in uniform circular motion keeps accelerating
- Velocity along the tangent Speed v constant, direction perpendicular to the radius.
- Body moves a little further The tangent direction has turned through Δθ.
- Velocity has changed Δv points towards the centre; a = v²/R.
- New position, new tangent The same happens at every point of the circle.
Then back to step 1: Velocity along the tangent
Angular speed, period and frequency
As the body moves from P to P′, the radius turns through the angular displacement Δθ. The angular speed is ω = Δθ/Δt, measured in rad s⁻¹. The arc length is Δs = RΔθ, so v = Δs/Δt = R Δθ/Δt, giving v = Rω. Then a_c = v²/R = (Rω)²/R = ω²R (also equal to vω). The time period T is the time for one revolution and the frequency ν = 1/T is the number of revolutions per second. In one revolution the body covers 2πR and turns through 2π rad, so v = 2πR/T = 2πRν, ω = 2π/T = 2πν and a_c = 4π²ν²R.
| Quantity | Symbol and SI unit | Relations |
|---|---|---|
| Linear speed | v (m s⁻¹) | v = Rω = 2πR/T = 2πRν |
| Angular speed | ω (rad s⁻¹) | ω = Δθ/Δt = 2π/T = 2πν |
| Time period | T (s) | T = 1/ν = 2π/ω |
| Frequency | ν (Hz = s⁻¹) | ν = 1/T |
| Centripetal acceleration | a_c (m s⁻²) | a_c = v²/R = ω²R = 4π²ν²R, towards the centre |
Uniform circular motion: a_c = v²/R = ω²R, always towards the centre; v = Rω; ω = 2π/T = 2πν.
Worked example 1: a stone on a string
A stone tied to a string 0.80 m long is whirled in a horizontal circle at a steady 2.0 revolutions per second. Find ω, v and a_c. Step 1: ν = 2.0 Hz, so ω = 2πν = 4π ≈ 12.6 rad s⁻¹. Step 2: v = Rω = 0.80 × 12.57 ≈ 10 m s⁻¹. Step 3: a_c = ω²R = (12.57)² × 0.80 ≈ 158 × 0.80 ≈ 126 m s⁻², about 13 times g, directed towards the hand at the centre.
Worked example 2: a car on a circular track
A car goes round a circular track of radius 50 m at a steady 36 km h⁻¹. Step 1: v = 36 × 5/18 = 10 m s⁻¹. Step 2: a_c = v²/R = 10²/50 = 2.0 m s⁻². Step 3: ω = v/R = 10/50 = 0.20 rad s⁻¹ and T = 2π/ω = 2π/0.20 ≈ 31 s per lap. If the speed were doubled, a_c would become four times as large, 8.0 m s⁻², because it depends on v².
Key takeaways
- Constant speed in a circle still means changing velocity, so there is an acceleration.
- Centripetal acceleration has magnitude v²/R = ω²R and points towards the centre.
- Its direction keeps changing, so it is not a constant vector.
- v = Rω, ω = 2π/T = 2πν, a_c = 4π²ν²R.
Check your understanding
-
1. A body moves in a circle of radius 2.0 m at a constant speed of 4.0 m s⁻¹. Its centripetal acceleration is:
- 2.0 m s⁻²
- 8.0 m s⁻²
- 16 m s⁻²
- 32 m s⁻²
Show answer
Answer: B. a_c = v²/R = 4.0²/2.0 = 16/2.0 = 8.0 m s⁻², directed towards the centre.
-
2. A wheel makes 120 revolutions per minute. Its angular speed is:
- 2π rad s⁻¹
- 120 rad s⁻¹
- 240π rad s⁻¹
- 4π rad s⁻¹
Show answer
Answer: D. ν = 120/60 = 2.0 revolutions per second. ω = 2πν = 2π × 2.0 = 4π ≈ 12.6 rad s⁻¹.
-
3. In uniform circular motion, which quantity stays constant?
- Speed
- Velocity
- Acceleration vector
- Displacement from the starting point
Show answer
Answer: A. The speed is constant by definition. The velocity's direction keeps changing, the acceleration vector keeps turning towards the centre, and the displacement from the start changes as the body moves.
-
4. If the speed of a body in uniform circular motion is doubled while the radius stays the same, its centripetal acceleration:
- doubles
- halves
- becomes four times
- stays the same
Show answer
Answer: C. a_c = v²/R. Doubling v multiplies v² by 2² = 4, so a_c becomes four times as large.
-
5. Assertion (A): A body moving in a circle at constant speed has an acceleration. Reason (R): Its velocity changes in direction even though its magnitude stays constant.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. Acceleration is the rate of change of velocity, a vector; a change of direction alone is a change of velocity. So R explains A, and the acceleration is v²/R towards the centre.
Sign in to keep track of the lessons you finish.