Revision notes

Chapter 3 Motion in a Plane: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Scalars and vectors: addition and subtraction by the graphical method

Two equivalent ways to add vectors

  • Triangle (head-to-tail)
    • Place the tail of B at the head of A
    • Join the tail of A to the head of B
    • A, B and R form a triangle
    • Easily extends to many vectors (polygon)
  • Parallelogram
    • Draw A and B from one point
    • Complete the parallelogram
    • The diagonal from that point is R
    • Same R as the triangle method

A vector has magnitude and direction and obeys the triangle law. A − B = A + (−B). A + B = B + A.

  • A vector needs magnitude, direction and the triangle law of addition.
  • Displacement depends only on the end points and never exceeds the path length.
  • Multiplying by a negative number reverses a vector's direction.
  • Addition is commutative and associative; subtraction is adding the negative.
Read the full lesson

Lesson 2

Resolution of vectors and the analytical method of addition

Adding vectors by components

  1. Resolve each vector Find Aₓ, A_y and Bₓ, B_y using cos and sin of each angle with the x-axis.
  2. Add like components Rₓ = Aₓ + Bₓ and R_y = A_y + B_y (subtract components to subtract vectors).
  3. Find the magnitude R = √(Rₓ² + R_y²).
  4. Find the direction tan θ = R_y/Rₓ; check the quadrant from the signs of Rₓ and R_y.

Aₓ = A cos θ, A_y = A sin θ; A = √(Aₓ² + A_y²). R = √(A² + B² + 2AB cos θ), tan α = B sin θ/(A + B cos θ).

  • A unit vector only gives a direction; î, ĵ, k̂ point along the axes.
  • Components can be negative; magnitude and angle follow from Pythagoras and tan.
  • To add vectors, add their components axis by axis.
  • The resultant of A and B always lies between |A − B| and A + B.
Read the full lesson

Lesson 3

Velocity and acceleration in a plane; motion with constant acceleration

Equations for constant acceleration in a plane
Vector formx-componenty-component
v = v₀ + atvₓ = v₀ₓ + aₓtv_y = v₀ᵧ + a_yt
r = r₀ + v₀t + ½at²x = x₀ + v₀ₓt + ½aₓt²y = y₀ + v₀ᵧt + ½a_yt²

Splitting a 2D motion with constant acceleration

  • x-motion
    • Uses v₀ₓ and aₓ only
    • vₓ = v₀ₓ + aₓt
    • x = x₀ + v₀ₓt + ½aₓt²
  • y-motion
    • Uses v₀ᵧ and a_y only
    • v_y = v₀ᵧ + a_yt
    • y = y₀ + v₀ᵧt + ½a_yt²
  • Common link
    • The same time t in both
    • Combine at the end: v = √(vₓ² + v_y²)

v = dr/dt is tangent to the path. For constant a: v = v₀ + at and r = r₀ + v₀t + ½at², applied separately to x and y.

  • Velocity components are vₓ = dx/dt and v_y = dy/dt; velocity is always tangent to the path.
  • Acceleration components are the time derivatives of the velocity components.
  • In a plane, velocity and acceleration can be at any angle to each other.
  • With constant acceleration, solve the x- and y-motions separately, linked by time.
Read the full lesson

Lesson 4

Projectile motion

A projectile's flight, stage by stage

  1. Launch vₓ = v₀ cos θ₀, v_y = v₀ sin θ₀; velocity at θ₀ above horizontal.
  2. Rising vₓ unchanged; v_y decreases by g every second.
  3. Top, t = v₀ sin θ₀/g v_y = 0; speed = v₀ cos θ₀ (horizontal); height (v₀ sin θ₀)²/(2g).
  4. Falling vₓ unchanged; v_y grows downward.
  5. Landing, t = 2v₀ sin θ₀/g Same speed as at launch, at θ₀ below horizontal; range v₀² sin 2θ₀/g.
Projectile formulas
QuantityFormula (launched and landing at the same level)
Time to reach the toptₘ = v₀ sin θ₀/g
Time of flightT_f = 2v₀ sin θ₀/g
Maximum heighthₘ = v₀² sin² θ₀/(2g)
Horizontal rangeR = v₀² sin 2θ₀/g
Maximum range (θ₀ = 45°)Rₘₐₓ = v₀²/g
Pathy = x tan θ₀ − g x²/(2v₀² cos² θ₀)

Horizontally: no acceleration. Vertically: free fall. T_f = 2v₀ sin θ₀/g, hₘ = v₀² sin² θ₀/2g, R = v₀² sin 2θ₀/g, Rₘₐₓ = v₀²/g at 45°.

  • Horizontal velocity of a projectile stays v₀ cos θ₀; vertical motion is free fall.
  • The path is a parabola; at the top the velocity is horizontal, not zero.
  • T_f = 2v₀ sin θ₀/g, hₘ = (v₀ sin θ₀)²/2g, R = v₀² sin 2θ₀/g.
  • Range is maximum at 45°; complementary angles give equal ranges.
Read the full lesson

Lesson 5

Uniform circular motion and centripetal acceleration

Why a body in uniform circular motion keeps accelerating

  1. Velocity along the tangent Speed v constant, direction perpendicular to the radius.
  2. Body moves a little further The tangent direction has turned through Δθ.
  3. Velocity has changed Δv points towards the centre; a = v²/R.
  4. New position, new tangent The same happens at every point of the circle.

Then back to step 1: Velocity along the tangent

Uniform circular motion at a glance
QuantitySymbol and SI unitRelations
Linear speedv (m s⁻¹)v = Rω = 2πR/T = 2πRν
Angular speedω (rad s⁻¹)ω = Δθ/Δt = 2π/T = 2πν
Time periodT (s)T = 1/ν = 2π/ω
Frequencyν (Hz = s⁻¹)ν = 1/T
Centripetal accelerationa_c (m s⁻²)a_c = v²/R = ω²R = 4π²ν²R, towards the centre

Uniform circular motion: a_c = v²/R = ω²R, always towards the centre; v = Rω; ω = 2π/T = 2πν.

  • Constant speed in a circle still means changing velocity, so there is an acceleration.
  • Centripetal acceleration has magnitude v²/R = ω²R and points towards the centre.
  • Its direction keeps changing, so it is not a constant vector.
  • v = Rω, ω = 2π/T = 2πν, a_c = 4π²ν²R.
Read the full lesson

Privacy · Terms · Refunds · Delivery