• Foundation
  • About 22 min
  • 5 practice questions

Equilibrium, common forces and free-body diagrams

Apply the conditions of equilibrium of a particle, recognise common forces in mechanics (normal force, tension, spring force), and solve problems systematically with free-body diagrams.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the condition for equilibrium of a particle under several concurrent forces.
  • Describe common forces: gravity, normal reaction, tension and the spring force F = −kx.
  • Draw a free-body diagram for a chosen system.
  • Solve problems on lifts, connected bodies and bodies in contact.
  • Identify action-reaction pairs in a problem correctly.

Real problems involve several bodies pushing and pulling on each other: blocks tied by strings, a person in a lift, a lamp hanging from wires. The laws of motion handle all of them, provided we choose a system carefully and list every force acting on it.

Equilibrium of a particle

A particle is in equilibrium when the net external force on it is zero; by the first law it is then at rest or moving uniformly. Under two forces, equilibrium needs F₁ = −F₂. Under three concurrent forces, F₁ + F₂ + F₃ = 0: the resultant of any two must be equal and opposite to the third, and the three forces, drawn head to tail, form a closed triangle. In general, forces in equilibrium form a closed polygon. In components, ΣFₓ = 0, ΣF_y = 0 and ΣF_z = 0. (For an extended body, rotational equilibrium is also needed; that comes in the chapter on rotational motion.)

Common forces in mechanics

Gravity acts at a distance. All other everyday forces in mechanics are contact forces, which arise when bodies touch. The component of a contact force perpendicular to the surfaces is the normal reaction N; the component along the surfaces is friction. Fluids exert contact forces too, such as the buoyant force and viscous drag. A string pulled taut exerts a tension T along its length; for a light (massless) string the tension is the same throughout. A spring stretched or compressed by x exerts a restoring force F = −kx, where k is the spring constant and the minus sign shows the force opposes the displacement. At the microscopic level, all contact forces come from electrical forces between the charged particles of the bodies, but we treat them by their measured properties.

Forces met in mechanics

  • Non-contact
    • Gravity (weight mg)
    • Electric and magnetic forces (for charged or magnetic bodies)
  • Contact with solids
    • Normal reaction, perpendicular to the surface
    • Friction, along the surface
    • Tension in strings and ropes
    • Spring force F = −kx
  • Contact with fluids
    • Buoyant force (upthrust)
    • Viscous drag and air resistance

The free-body diagram method

  1. Draw a sketch of the whole arrangement: bodies, strings, supports.
  2. Choose one convenient part as the system.
  3. Draw a free-body diagram: the system alone, with every force acting ON it from outside (gravity, normal forces, tensions, friction, applied forces). Do not include forces the system exerts on other things.
  4. Mark known forces; treat the rest as unknowns. Apply ΣF = ma along suitable axes.
  5. If needed, repeat for another part, using the third law: if B exerts F on A, A exerts −F on B.

Equilibrium: ΣF = 0 (closed force polygon). Otherwise ΣF_external = ma for the chosen system. Spring: F = −kx.

Worked example 1: a hanging lamp

A lamp of mass 2.0 kg hangs from the midpoint of a wire whose two halves each make 30° with the horizontal. Find the tension (g = 9.8 m s⁻²). Free body: the junction point, with the weight 19.6 N down and two equal tensions T along the wires. Horizontal: T cos 30° − T cos 30° = 0 (balanced by symmetry). Vertical: 2T sin 30° = 19.6, so 2T × 0.5 = 19.6 and T = 19.6 N. The tension in each wire equals the full weight. The flatter the wire, the smaller sin θ and the larger the tension, which is why a washing line pulled straight can snap.

Worked example 2: a person in a lift

A person of mass 60 kg stands on a weighing scale in a lift (g = 9.8 m s⁻²). The scale reads the normal force N. Free body of the person: N up, mg down. Taking up as positive, N − mg = ma. Accelerating up at 2.0 m s⁻²: N = 60(9.8 + 2.0) = 708 N. Moving at constant velocity: N = mg = 588 N. Accelerating down at 2.0 m s⁻²: N = 60(9.8 − 2.0) = 468 N. Falling freely (a = −g): N = 0, and the person feels weightless.

Worked example 3: blocks joined by a string

A 4.0 kg block on a smooth horizontal table is tied by a light string, over a smooth pulley at the table's edge, to a 1.0 kg block hanging freely. Find the acceleration and tension (g = 9.8 m s⁻²). The string is inextensible, so both blocks have the same magnitude of acceleration a. Hanging block: 1.0 × 9.8 − T = 1.0 × a. Table block: T = 4.0 × a. Adding: 9.8 = 5.0a, so a = 1.96 m s⁻². Then T = 4.0 × 1.96 = 7.84 N. Check: 9.8 − 7.84 = 1.96 ✓. Notice T is less than the hanging weight of 9.8 N, since the hanging block is accelerating downward.

Worked example 4: identifying action-reaction pairs

Two blocks, 3.0 kg and 2.0 kg, touch each other on a smooth floor and a 10 N force pushes the 3.0 kg block. Whole system: a = 10/5.0 = 2.0 m s⁻². Free body of the 2.0 kg block: the only horizontal force is the push P from the 3.0 kg block, so P = 2.0 × 2.0 = 4.0 N. Free body of the 3.0 kg block: 10 − 4.0 = 3.0 × 2.0 ✓. The 4.0 N forces between the blocks are an action-reaction pair (on different blocks); the weight and normal force on one block are not a pair, even though they are equal here.

Key takeaways

  • Concurrent forces in equilibrium form a closed polygon: ΣFₓ = ΣF_y = 0.
  • Normal force and friction are the perpendicular and parallel parts of a contact force.
  • A free-body diagram shows only forces acting on the chosen system.
  • Apparent weight in a lift is N = m(g + a) with upward a positive.

Check your understanding

  1. 1. A spring with spring constant 200 N m⁻¹ is stretched by 5.0 cm. The restoring force it exerts is:

    1. 10 N
    2. 1000 N
    3. 40 N
    4. 4.0 N
    Show answer

    Answer: A. |F| = kx = 200 × 0.050 = 10 N, directed opposite to the stretch (towards the unstretched position).

  2. 2. A 50 kg person stands on a scale in a lift accelerating downward at 1.8 m s⁻². Taking g = 9.8 m s⁻², the scale reads:

    1. 490 N
    2. 580 N
    3. 400 N
    4. 0
    Show answer

    Answer: C. With up positive: N − mg = m(−1.8), so N = 50(9.8 − 1.8) = 50 × 8.0 = 400 N.

  3. 3. Three forces act on a particle in equilibrium. Two of them are 3 N east and 4 N north. The third force is:

    1. 7 N towards the south-west
    2. 5 N, directly opposite to the resultant of the other two (towards the south-west)
    3. 5 N towards the north-east
    4. 1 N towards the west
    Show answer

    Answer: B. The resultant of 3 N east and 4 N north is √(9 + 16) = 5 N, pointing about 53° north of east. For equilibrium the third force must be equal and opposite to it: 5 N pointing about 53° south of west. The three forces then form a closed triangle.

  4. 4. Blocks of 6.0 kg and 2.0 kg are joined by a light string and pulled along a smooth floor by a 16 N force applied to the 6.0 kg block. The tension in the string is:

    1. 16 N
    2. 12 N
    3. 8.0 N
    4. 4.0 N
    Show answer

    Answer: D. Acceleration of the whole system: a = 16/(6.0 + 2.0) = 2.0 m s⁻². The string alone pulls the 2.0 kg block, so T = 2.0 × 2.0 = 4.0 N.

  5. 5. Assertion (A): In a freely falling lift, a person standing on a weighing scale reads zero. Reason (R): In free fall the person and the scale have the same acceleration g, so the scale need not push on the person.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. N − mg = m(−g) gives N = 0. Because the person and scale fall together with acceleration g, no normal force is needed, which is why the reading is zero. R explains A.

Privacy · Terms · Refunds · Delivery