Revision notes

Chapter 4 Laws of Motion: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Inertia and Newton's first law of motion

Galileo's double-inclined-plane argument

  1. Ball released on a smooth slope It rolls down and up a second slope to almost the same height.
  2. Second slope made gentler It still reaches the same height but travels further.
  3. Second slope made horizontal It can never regain its height, so it keeps moving.
  4. Conclusion: law of inertia Without friction, uniform motion continues with no net force.

Every body continues in its state of rest or of uniform motion in a straight line unless compelled by some external force to act otherwise.

— Newton's first law of motion
  • No net force is needed to keep a body in uniform motion; force is needed only to change its velocity.
  • Friction is why everyday objects seem to need a push to keep moving.
  • First law: zero net external force ⇔ zero acceleration.
  • Reason from observed motion to forces: 'it is at rest, so the forces must balance'.
Read the full lesson

Lesson 2

Momentum and Newton's second law of motion

The rate of change of momentum of a body is directly proportional to the applied force and takes place in the direction in which the force acts.

— Newton's second law of motion

F = dp/dt = ma (1 N = 1 kg m s⁻²)

Newton's second law, F = dp/dt

  • General form
    • F = dp/dt
    • Use when mass or momentum direction changes
    • Force equals rate of change of momentum
  • Constant mass
    • F = ma
    • 1 N = 1 kg m s⁻²
    • a is along the net force
  • Component form
    • Fₓ = maₓ, F_y = ma_y, F_z = ma_z
    • Each axis treated separately
  • System of particles
    • F = total external force only
    • a = acceleration of the centre of mass
    • Internal forces cancel in pairs
  • Momentum p = mv is a vector; force is the rate of change of momentum.
  • For constant mass, F = ma, with 1 N = 1 kg m s⁻².
  • The second law is a vector law, holds for systems with external forces only, and is local in time.
  • The same force for the same time gives every body the same change in momentum.
Read the full lesson

Lesson 3

Impulse, Newton's third law and conservation of momentum

To every action, there is always an equal and opposite reaction.

— Newton's third law of motion

Reading the third law correctly

  • What the law says
    • Forces come in pairs between two bodies
    • The two forces are equal and opposite
    • They act at the same instant
    • Either one may be called the action
  • Common mistakes
    • Thinking action comes first and causes reaction
    • Adding action and reaction on one body to get zero
    • Calling weight and normal force on a book a third-law pair
    • Thinking the bigger body exerts the bigger force

The total momentum of an isolated system of interacting particles is conserved.

— Law of conservation of momentum
  • Impulse = FΔt = Δp; a longer stopping time means a smaller average force.
  • Third law: F_AB = −F_BA, acting on different bodies, at the same instant.
  • Action and reaction never cancel in the motion of a single body.
  • With no external force, total momentum is conserved in recoil, explosions and collisions.
Read the full lesson

Lesson 4

Equilibrium, common forces and free-body diagrams

Forces met in mechanics

  • Non-contact
    • Gravity (weight mg)
    • Electric and magnetic forces (for charged or magnetic bodies)
  • Contact with solids
    • Normal reaction, perpendicular to the surface
    • Friction, along the surface
    • Tension in strings and ropes
    • Spring force F = −kx
  • Contact with fluids
    • Buoyant force (upthrust)
    • Viscous drag and air resistance

Equilibrium: ΣF = 0 (closed force polygon). Otherwise ΣF_external = ma for the chosen system. Spring: F = −kx.

  • Concurrent forces in equilibrium form a closed polygon: ΣFₓ = ΣF_y = 0.
  • Normal force and friction are the perpendicular and parallel parts of a contact force.
  • A free-body diagram shows only forces acting on the chosen system.
  • Apparent weight in a lift is N = m(g + a) with upward a positive.
Read the full lesson

Lesson 5

Friction and the dynamics of circular motion

Friction as the applied force grows

  1. No push No static friction at all.
  2. Small push F Static friction fₛ = F; the body stays at rest.
  3. F reaches μₛN Limiting friction; motion is just about to start.
  4. F exceeds μₛN Body slides; friction drops to f_k = μ_kN, and a = (F − f_k)/m.
Who supplies the centripetal force?
SituationSource of centripetal forceKey result
Stone whirled on a stringTension in the stringT = mv²/R (horizontal circle, ignoring gravity's effect on the string)
Car on a level curveStatic friction from the roadvₘₐₓ = √(μₛRg)
Car on a banked curveHorizontal parts of N and frictionv₀ = √(Rg tan θ) without friction
Planet round the SunGravitational pull of the SunGMm/r² = mv²/r

fₛ ≤ μₛN, f_k = μ_kN, μ_k < μₛ; tan θ (repose) = μₛ. Centripetal force mv²/R; level road vₘₐₓ = √(μₛRg); banked road v₀ = √(Rg tan θ).

  • Static friction adjusts itself up to μₛN; kinetic friction is μ_kN and is smaller.
  • The angle of repose satisfies tan θ = μₛ, whatever the mass.
  • Centripetal force is the net inward force (tension, friction, gravity), never an extra force.
  • Banking lets the normal force supply part of the centripetal force, raising the safe speed.
Read the full lesson

Privacy · Terms · Refunds · Delivery