- Foundation
- About 22 min
- 5 practice questions
Processes of recombinant DNA technology: isolating, cutting and amplifying DNA by PCR
List the steps of recombinant DNA technology, explain how pure DNA is isolated and cut, work out PCR amplification over many cycles, and explain how transformants are selected.
If something looks wrong, please tell us.
By the end of this lesson you can
- List the steps of recombinant DNA technology in order.
- Explain how DNA is released from cells and purified, naming the enzymes used.
- Describe the three steps of a PCR cycle and calculate the number of copies after n cycles.
- Explain how a selectable marker identifies transformed cells.
With the tools in hand, the work follows a fixed sequence: isolate DNA → cut it with restriction enzymes → isolate the wanted fragment → ligate it into a vector → transfer the recombinant DNA into a host → culture the host on a large scale → extract the product. This lesson covers the first half, up to getting the gene into the host.
Isolating the genetic material
In most organisms the genetic material is DNA. To be cut by restriction enzymes it must be pure, free of other macromolecules. Cells are broken open with enzymes suited to their walls: lysozyme for bacteria, cellulase for plant cells and chitinase for fungi. This releases DNA along with RNA, proteins, polysaccharides and lipids. Ribonuclease removes RNA and protease removes proteins, including the histones wrapped around DNA. Other molecules are removed by suitable treatments, and finally chilled ethanol is added: the purified DNA precipitates as fine threads, which can be wound out by spooling.
| Enzyme | Acts on | Purpose |
|---|---|---|
| Lysozyme | Bacterial cell wall | Break bacterial cells open |
| Cellulase | Plant cell wall | Break plant cells open |
| Chitinase | Fungal cell wall | Break fungal cells open |
| Ribonuclease | RNA | Remove RNA |
| Protease | Proteins (including histones) | Remove proteins |
Cutting at specific locations
Purified DNA is incubated with a restriction enzyme under the conditions best for that enzyme. Agarose gel electrophoresis is used to check how far the digestion has gone; DNA moves towards the anode. The vector DNA is cut in the same way. The cut-out gene of interest and the opened vector are mixed, and ligase is added to form recombinant DNA.
Amplifying the gene: the polymerase chain reaction (PCR)
PCR makes many copies of a chosen DNA segment in vitro. It needs the template DNA, two primers (short, chemically synthesised oligonucleotides complementary to the two ends of the target region), the four deoxynucleotides and a DNA polymerase. Each cycle has three steps. Typical working temperatures, used widely in laboratories, are given in brackets; exact values depend on the primers.
One PCR cycle (repeated many times)
- Denaturation Heat (about 94 °C) separates the two DNA strands.
- Primer annealing Cooling (often about 50-60 °C) lets the primers bind their complementary sites.
- Extension DNA polymerase (about 72 °C) extends the primers using the strands as templates.
Then back to step 1: Denaturation
Repeating denaturation needs high temperatures every cycle, which would destroy most enzymes. PCR therefore uses a thermostable DNA polymerase from the bacterium Thermus aquaticus (Taq polymerase), which stays active through the heating. Because each cycle roughly doubles the number of target copies, the segment can be amplified about a billion times. The amplified fragment can then be ligated into a vector for cloning.
Ideal PCR yield: copies after n cycles = starting copies × 2ⁿ. 2¹⁰ = 1024 ≈ 10³, so 30 cycles ≈ 10⁹ (about a billion).
Worked example 1: how many copies after 30 cycles?
One molecule of target DNA undergoes 30 cycles of PCR, assuming perfect doubling every cycle. Step 1: copies = 1 × 2³⁰. Step 2: 2³⁰ = (2¹⁰)³ = 1024³. Step 3: 1024³ = 1,073,741,824 ≈ 1.07 × 10⁹. Answer: about a billion copies, which matches the 'approximately billion times' amplification of PCR. Real reactions are slightly less than perfect, so actual yields are somewhat lower.
Worked example 2: how many cycles are needed?
A sample contains 100 copies of a gene, and at least 100,000 copies are needed. Step 1: required increase = 100,000 ÷ 100 = 1000 times. Step 2: find the smallest n with 2ⁿ ≥ 1000. 2⁹ = 512, which is too few; 2¹⁰ = 1024, which is enough. Answer: 10 cycles, giving 100 × 1024 = 102,400 copies under ideal doubling.
Inserting recombinant DNA into the host and selecting transformants
Competent recipient cells take up DNA from their surroundings. If the recombinant DNA carries a gene for ampicillin resistance and is taken up by E. coli, those cells become ampicillin-resistant. When all the cells are spread on agar containing ampicillin, only transformants grow; untransformed cells die. The ampicillin resistance gene is acting as a selectable marker.
Key takeaways: recombinant DNA technology runs from isolating DNA to extracting the product. Cells are opened with lysozyme, cellulase or chitinase; RNA and proteins are removed with ribonuclease and protease; DNA precipitates with chilled ethanol. DNA is cut with restriction enzymes and checked on a gel. PCR uses two primers and thermostable Taq polymerase through cycles of denaturation, annealing and extension, ideally doubling the target each cycle (2ⁿ). A selectable marker such as ampicillin resistance lets only transformants grow.
Check your understanding
-
1. Which enzyme would you use to break open fungal cells to release their DNA?
- Lysozyme
- Cellulase
- Chitinase
- Ribonuclease
Show answer
Answer: C. Fungal cell walls contain chitin, so chitinase is used. Lysozyme is used for bacteria, cellulase for plant cells, and ribonuclease removes RNA after the cells are opened.
-
2. Starting with 4 copies of a target DNA, how many copies are present after 5 cycles of ideal PCR?
- 20
- 40
- 64
- 128
Show answer
Answer: D. Each cycle doubles the copies: copies = 4 × 2⁵ = 4 × 32 = 128.
-
3. Why is Taq polymerase used in PCR instead of an ordinary DNA polymerase?
- It remains active at the high temperatures used to denature DNA
- It does not need primers
- It works only at low temperatures
- It cuts DNA at palindromes
Show answer
Answer: A. Each PCR cycle heats the DNA to separate its strands. Taq polymerase, from Thermus aquaticus, is thermostable and survives this heating, so it need not be added afresh every cycle.
-
4. During DNA isolation, what is added at the end to make the purified DNA precipitate as fine threads?
- Ethidium bromide
- Chilled ethanol
- Calcium chloride
- Agarose
Show answer
Answer: B. Chilled ethanol makes purified DNA precipitate out of the solution as fine threads, which can be collected by spooling. Ethidium bromide stains DNA on gels, and calcium chloride makes bacteria competent.
-
5. Assertion (A): After transformation with a plasmid carrying an ampicillin resistance gene, only transformed E. coli grow on ampicillin agar. Reason (R): Normal E. coli cells do not carry resistance against ampicillin.
- A is false but R is true
- A is true but R is false
- Both A and R are false
- Both A and R are true, and R is the correct explanation of A
Show answer
Answer: D. Untransformed E. coli lack ampicillin resistance and die on ampicillin agar, while cells that took up the plasmid survive. That is why the resistance gene works as a selectable marker. R explains A.
Sign in to keep track of the lessons you finish.