• Foundation
  • About 20 min
  • 5 practice questions

Restriction enzymes, sticky ends and gel electrophoresis

Explain how restriction endonucleases are named, how they recognise palindromes and leave sticky ends, and how agarose gel electrophoresis separates, shows and recovers DNA fragments.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how restriction enzymes were discovered and how they are named.
  • Tell exonucleases from endonucleases.
  • Identify a DNA palindrome and explain how sticky ends form.
  • Describe agarose gel electrophoresis, staining with ethidium bromide and elution.

Every genetic engineering experiment begins by cutting DNA at exactly the right place. The tools for this are enzymes that bacteria evolved to protect themselves against viruses. Learning how they cut, and how the pieces are then sorted by size, is the foundation for the rest of the chapter.

Discovery and naming

In 1963 two enzymes that restrict the growth of bacteriophages in E. coli were isolated: one added methyl groups to the bacterium's own DNA, the other cut DNA. The cutting enzyme was called a restriction endonuclease. The first one whose action depended on a specific base sequence, Hind II, was characterised five years later; it always cut DNA at a particular point by recognising a specific sequence of six base pairs, its recognition sequence. More than 900 restriction enzymes are now known, from over 230 strains of bacteria.

How the name EcoRI is built
PartComes fromMeaning
EGenus*Escherichia*
coSpecies*coli*
RStrainRY 13
IRoman numeralFirst enzyme isolated from that strain

Exonucleases and endonucleases

Restriction enzymes belong to a larger class, the nucleases, which break the bonds between nucleotides. Exonucleases remove nucleotides from the ends of a DNA molecule. Endonucleases cut at specific positions within the DNA. A restriction endonuclease moves along the DNA 'inspecting' the sequence; when it finds its recognition sequence, it binds and cuts each of the two strands in their sugar-phosphate backbones.

Palindromes and sticky ends

Each restriction endonuclease recognises a palindromic sequence. In words, a palindrome reads the same forwards and backwards, like 'level'. In DNA, a palindrome is a sequence of base pairs that reads the same on both strands when both are read in the same direction (5′ → 3′, or both 3′ → 5′). The EcoRI site is an example:

5′ — G A A T T C — 3′ / 3′ — C T T A A G — 5′. Read 5′ → 3′, both strands say GAATTC.

EcoRI cuts each strand between G and A. Because these cuts are a little away from the centre of the palindrome, but between the same two bases on opposite strands, each fragment is left with a short single-stranded overhang, 5′-AATT. These overhangs are sticky ends: they can form hydrogen bonds with complementary sticky ends. If the source DNA and the vector are cut with the same enzyme, their sticky ends match, and DNA ligase can join them end to end into recombinant DNA.

Making recombinant DNA with one restriction enzyme

  1. Cut source DNA EcoRI cuts out the gene, leaving AATT sticky ends.
  2. Cut vector The same enzyme opens the plasmid with matching ends.
  3. Mix Complementary sticky ends pair by hydrogen bonds.
  4. Seal DNA ligase joins the backbones: recombinant DNA.

Separating fragments: agarose gel electrophoresis

Cutting DNA gives a mixture of fragments. They are separated by gel electrophoresis. DNA is negatively charged (from its phosphate groups), so in an electric field it moves towards the anode (positive electrode). The matrix used is usually agarose, a natural polymer extracted from seaweed. The gel acts like a sieve: the smaller the fragment, the farther it moves. Pure DNA cannot be seen in visible light, so the gel is stained with ethidium bromide and exposed to UV light, which shows the DNA as bright orange bands. The wanted band is cut out of the gel and the DNA is extracted from the gel piece, a step called elution. The purified fragment is then joined to a cloning vector.

Worked example 1: is this a palindrome?

Test 5′-GGATCC-3′ (the BamHI site). Step 1: write the complementary strand base by base (G-C, A-T): 3′-CCTAGG-5′. Step 2: read the complementary strand from its own 5′ end, i.e. right to left: G G A T C C. Step 3: compare with the top strand, GGATCC. They match, so the sequence is a palindrome. Now test 5′-GAATTG-3′: the complement is 3′-CTTAAC-5′, which read 5′ → 3′ is CAATTC. This differs from GAATTG, so it is not a palindrome.

Worked example 2: reading a gel

Made-up data: a DNA sample cut with an enzyme gives three fragments of 500, 2000 and 5000 base pairs. Reasoning: (1) all fragments move from the well (at the cathode end) towards the anode; (2) agarose sieves them by size; (3) the 500 bp fragment slips through the pores fastest. Conclusion: after running, the 500 bp band is farthest from the well, the 5000 bp band nearest to it, and 2000 bp lies between them. The wells are therefore at the end of the gel farthest from where the smallest band ends up.

Key takeaways: restriction endonucleases cut DNA at specific palindromic recognition sequences; names come from genus, species, strain and order of isolation (EcoRI). Endonucleases cut within DNA, exonucleases trim the ends. Cuts slightly off-centre leave sticky ends, so DNA cut with the same enzyme can be joined by ligase. Agarose gel electrophoresis separates negatively charged fragments by size towards the anode, ethidium bromide and UV make bands visible, and elution recovers them.

Check your understanding

  1. 1. In the name EcoRI, the letter 'R' refers to

    1. the genus of the bacterium
    2. the strain of the bacterium
    3. the species of the bacterium
    4. the order in which the enzyme was discovered
    Show answer

    Answer: B. E comes from the genus Escherichia, co from the species coli, R from the strain RY 13, and the Roman numeral I shows it was the first enzyme isolated from that strain.

  2. 2. Which of these sequences is a palindrome in the DNA sense? (Only the 5′ → 3′ strand is shown.)

    1. 5′-GAATTC-3′
    2. 5′-GATTAC-3′
    3. 5′-GGAACC-3′
    4. 5′-AAGCTA-3′
    Show answer

    Answer: A. For GAATTC the complementary strand is 3′-CTTAAG-5′, which read 5′ → 3′ is GAATTC, the same as the top strand. For GATTAC the complement read 5′ → 3′ is GTAATC; for GGAACC it is GGTTCC; for AAGCTA it is TAGCTT. None of these match.

  3. 3. In agarose gel electrophoresis, DNA fragments move towards the anode because

    1. they are positively charged
    2. they are attracted by the stain
    3. the gel is denser near the anode
    4. they are negatively charged
    Show answer

    Answer: D. The phosphate groups in its backbone give DNA a negative charge, so it moves towards the positive electrode, the anode. The agarose matrix then separates fragments by size.

  4. 4. Assertion (A): A vector and the source DNA are usually cut with the same restriction enzyme. Reason (R): Fragments cut by the same restriction enzyme have the same kind of sticky ends, which can be joined by DNA ligase.

    1. Both A and R are true, but R is not the correct explanation of A
    2. Both A and R are true, and R is the correct explanation of A
    3. A is true but R is false
    4. A is false but R is true
    Show answer

    Answer: B. Cutting both with the same enzyme gives complementary sticky ends that pair and can be sealed by ligase into recombinant DNA. That is the reason the same enzyme is used, so R explains A.

  5. 5. The step in which a DNA band is cut out of an agarose gel and the DNA extracted from it is called

    1. ligation
    2. transformation
    3. elution
    4. annealing
    Show answer

    Answer: C. Elution is the extraction of DNA from the gel piece containing the band. The purified fragment can then be ligated into a vector. Annealing is a step in PCR, and transformation is the uptake of DNA by a host.

Sign in to keep track of the lessons you finish.

Next lesson → Cloning vectors and competent hosts

Privacy · Terms · Refunds · Delivery