• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: The d- and f-Block Elements

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, without looking back at the lessons. Use μ = √[n(n + 2)] BM where needed. The questions mix all five lessons and are harder on average than the lesson checks. Mark your answers first, then read every explanation.

Final self-assessment

  1. 1. Which of these ions has the same number of d electrons as Fe³⁺?

    1. Fe²⁺
    2. Mn²⁺
    3. Co³⁺
    4. Cr³⁺
    Show answer

    Answer: B. Fe³⁺ is [Ar]3d⁵. Mn²⁺ is also [Ar]3d⁵ (Mn: 3d⁵4s², minus the two 4s electrons). Fe²⁺ and Co³⁺ are 3d⁶ and Cr³⁺ is 3d³.

  2. 2. Silver has a completely filled 4d subshell in its ground state. Why is it still classed as a transition element?

    1. Its Ag²⁺ ion has an incomplete 4d subshell (4d⁹)
    2. It is a coinage metal
    3. It forms coloured compounds in all oxidation states
    4. It has a 5s² configuration
    Show answer

    Answer: A. The definition needs an incomplete d subshell in the atom OR in an ion. In its +2 state silver is 4d⁹, which is incomplete, so it qualifies.

  3. 3. In the 3d series, which metal has the lowest enthalpy of atomisation, and why?

    1. Chromium, because it has a half-filled 3d set
    2. Iron, because of its high density
    3. Scandium, because it has only one d electron
    4. Zinc, because its d electrons do not take part in metallic bonding
    Show answer

    Answer: D. Zinc's 3d¹⁰ electrons are not used in metallic bonding, so only the 4s² electrons hold the atoms together. Its bonding is weakest and its enthalpy of atomisation the lowest of the series (about 126 kJ mol⁻¹).

  4. 4. Which of the following correctly explains why E°(Cu²⁺/Cu) is positive while the other 3d metals have negative values?

    1. Copper has a very low enthalpy of atomisation
    2. Cu²⁺ has a very small hydration enthalpy
    3. The energy to atomise and ionise copper is not compensated by the hydration enthalpy of Cu²⁺
    4. Copper has a half-filled d subshell
    Show answer

    Answer: C. Turning Cu(s) into Cu²⁺(aq) needs a high enthalpy of atomisation plus a high sum of first and second ionisation enthalpies. The hydration enthalpy released does not make up for this, so the overall change is unfavourable and E° is positive (+0.34 V).

  5. 5. Which species is expected to disproportionate in aqueous solution?

    1. Zn²⁺
    2. Cu⁺
    3. Fe³⁺
    4. Sc³⁺
    Show answer

    Answer: B. 2Cu⁺ → Cu²⁺ + Cu has E°cell = E°(Cu⁺/Cu) − E°(Cu²⁺/Cu⁺) = 0.52 − 0.15 = +0.37 V, so it is spontaneous. Zn²⁺, Fe³⁺ and Sc³⁺ are stable in water.

  6. 6. Assertion (A): Mn³⁺ is a strong oxidising agent. Reason (R): Mn³⁺ (d⁴) gains an electron to become Mn²⁺, which has the extra-stable d⁵ configuration.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. E°(Mn³⁺/Mn²⁺) = +1.57 V is high because reduction produces the half-filled d⁵ Mn²⁺. R explains A.

  7. 7. A 3d ion M²⁺ has a spin-only magnetic moment of 5.92 BM. What is M?

    1. Fe
    2. Co
    3. Cr
    4. Mn
    Show answer

    Answer: D. 5.92 BM corresponds to n = 5 (√35). An M²⁺ ion with five unpaired electrons is d⁵, which is Mn²⁺ (Mn: 3d⁵4s²).

  8. 8. Which pair of ions are both colourless in water?

    1. Ti⁴⁺ and Zn²⁺
    2. Cu²⁺ and Zn²⁺
    3. Ti³⁺ and Sc³⁺
    4. Fe²⁺ and Ni²⁺
    Show answer

    Answer: A. Ti⁴⁺ is 3d⁰ and Zn²⁺ is 3d¹⁰; neither can undergo a d–d transition, so both are colourless. Cu²⁺, Ti³⁺, Fe²⁺ and Ni²⁺ have partly filled d subshells and are coloured.

  9. 9. Which property is NOT typical of interstitial compounds of transition metals?

    1. High melting point
    2. Great hardness
    3. Exact stoichiometric formulas such as TiC₂ matching normal oxidation states
    4. Metallic conductivity
    Show answer

    Answer: C. Interstitial compounds are usually non-stoichiometric (e.g. VH₀.₅₆, TiH₁.₇), and their formulas do not correspond to normal oxidation states. They are hard, high-melting and keep metallic conductivity.

  10. 10. How many moles of Fe²⁺ are oxidised by 0.020 mol of K₂Cr₂O₇ in acidic solution?

    1. 0.040 mol
    2. 0.12 mol
    3. 0.10 mol
    4. 0.060 mol
    Show answer

    Answer: B. Cr₂O₇²⁻ + 14H⁺ + 6Fe²⁺ → 2Cr³⁺ + 6Fe³⁺ + 7H₂O. Each mole of dichromate oxidises 6 mol of Fe²⁺, so 0.020 × 6 = 0.12 mol.

  11. 11. In neutral or faintly alkaline solution, permanganate oxidises iodide. What are the products?

    1. I₂ and Mn²⁺
    2. I₂ and MnO₄²⁻
    3. IO₃⁻ and MnO₂
    4. IO₄⁻ and Mn²⁺
    Show answer

    Answer: C. In neutral or faintly alkaline medium, permanganate is reduced to MnO₂ and iodide is oxidised to iodate: 2MnO₄⁻ + H₂O + I⁻ → 2MnO₂ + 2OH⁻ + IO₃⁻. In acid, by contrast, iodine and Mn²⁺ are formed.

  12. 12. Which statement about the chromate and dichromate ions is correct?

    1. Chromium is +6 in chromate and +7 in dichromate
    2. Dichromate is two tetrahedra sharing a corner, and chromium is +6 in both
    3. Chromate is orange and dichromate yellow
    4. Dichromate is formed when alkali is added to chromate
    Show answer

    Answer: B. In CrO₄²⁻: x − 8 = −2 → +6; in Cr₂O₇²⁻: 2x − 14 = −2 → +6. Dichromate is two CrO₄ tetrahedra sharing one oxygen (Cr–O–Cr 126°). It is orange, chromate is yellow, and dichromate forms when acid is added.

  13. 13. Which lanthanoid has the configuration [Xe] 4f⁷ 5d¹ 6s² and forms a very stable +3 ion?

    1. Europium
    2. Cerium
    3. Ytterbium
    4. Gadolinium
    Show answer

    Answer: D. Gadolinium (Z = 64) keeps the half-filled 4f⁷ set and places one electron in 5d. Gd³⁺ is [Xe]4f⁷, a stable half-filled arrangement; this is also why the third ionisation enthalpy of Gd is unusually low.

  14. 14. Which is a consequence of the lanthanoid contraction?

    1. Hf and Zr have almost identical radii and are difficult to separate
    2. Lanthanoids show oxidation states up to +7
    3. The basic strength of Ln(OH)₃ increases from La to Lu
    4. All lanthanoids are radioactive
    Show answer

    Answer: A. The contraction cancels the expected size increase from the 4d to the 5d series, so Zr (160 pm) and Hf (159 pm) are nearly the same size and very alike chemically. Basicity of Ln(OH)₃ actually decreases from La to Lu, and only promethium is radioactive.

  15. 15. Which actinoid shows the highest oxidation state, +7?

    1. Thorium
    2. Uranium
    3. Neptunium
    4. Lawrencium
    Show answer

    Answer: C. The maximum oxidation state rises from +4 (Th) through +5 (Pa) and +6 (U) to +7 for neptunium (and plutonium), then falls for later actinoids.

Questions 1-3: lesson 1 (configurations and physical properties). Questions 4-6: lesson 2 (oxidation states and electrode potentials). Questions 7-9: lesson 3 (magnetism, colour, interstitial compounds). Questions 10-12: lesson 4 (dichromate and permanganate). Questions 13-15: lesson 5 (lanthanoids and actinoids).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery