• Foundation
  • About 16 min
  • 5 practice questions

Non-ferrous and non-metallic minerals: bauxite, copper and mica

Describe the uses and distribution of bauxite and copper, explain India's position in non-ferrous minerals, and describe the uses and belts of mica.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the occurrence, uses and distribution of bauxite.
  • Describe the uses and distribution of copper.
  • Describe the properties, uses and main belts of mica.

According to the textbook, India is poorly endowed with non-ferrous metallic minerals, except bauxite. Among non-metallic minerals, mica is the most important; limestone, dolomite and phosphate are extracted mainly for local use.

Bauxite

Bauxite is the ore used to make aluminium. It is found mainly in tertiary deposits and is associated with laterite rocks, which occur widely on the plateaus and hill ranges of peninsular India and in coastal tracts.

Distribution of bauxite
StateBauxite areas named in the textbook
Odisha (largest producer)Kalahandi and Sambalpur lead; Bolangir and Koraput increasing
JharkhandPatlands of Lohardaga
GujaratBhavnagar and Jamnagar
ChhattisgarhAmarkantak plateau
Madhya PradeshKatni-Jabalpur area and Balaghat
MaharashtraKolaba, Thane, Ratnagiri, Satara, Pune, Kolhapur
Minor producersTamil Nadu, Karnataka, Goa

Copper

Copper is indispensable in the electrical industry for wires, electric motors, transformers and generators. It is alloyable, malleable and ductile, and is mixed with gold to give strength to jewellery. Copper deposits occur mainly in Singhbhum (Jharkhand), Balaghat (Madhya Pradesh) and Jhunjhunu and Alwar (Rajasthan). Minor producers include Agnigundala in Guntur (Andhra Pradesh), Chitradurg and Hassan (Karnataka) and South Arcot (Tamil Nadu).

Bauxite and copper

  • Bauxite
    • Ore of aluminium
    • Tertiary deposits, laterite rocks
    • Plateaus, hill ranges, coastal tracts
    • Odisha largest producer
  • Copper
    • Electrical wires, motors, transformers
    • Malleable, ductile, alloyable
    • Singhbhum, Balaghat, Jhunjhunu, Alwar
    • India's reserves meagre

Mica

Mica is used mainly in the electrical and electronic industries. It can be split into very thin sheets that are tough and flexible. The textbook names Jharkhand, Andhra Pradesh, Telangana and Rajasthan as producers, followed by Tamil Nadu, West Bengal and Madhya Pradesh.

Mica belts
AreaDescription in the textbook
JharkhandHigh-quality mica in a belt about 150 km long and 22 km wide in the lower Hazaribagh plateau
Andhra PradeshNellore district produces the best quality mica
RajasthanA belt of about 320 km from Jaipur to Bhilwara and around Udaipur
Other occurrencesMysuru and Hassan (Karnataka); Coimbatore, Tiruchirapalli, Madurai, Kanniyakumari (Tamil Nadu); Alleppey (Kerala); Ratnagiri (Maharashtra); Purulia and Bankura (West Bengal)

Other non-metallic minerals

The textbook notes that limestone, dolomite and phosphate are extracted mainly for local consumption. Recall from the mineral belts that the north-western region has dolomite and limestone that provide raw material for the cement industry, along with gypsum and Fuller's earth, and that Rajasthan is rich in building stones. These minerals are bulky and of low value per tonne, so they are usually used close to where they are mined.

What poor non-ferrous reserves mean for India

Because India's reserves of copper, lead and zinc are meagre, industries that need them must either import ore or metal or use what is available more carefully. This is why the textbook, at the end of the chapter, stresses recycling scrap metal and using substitutes for scarce metals. Bauxite is the exception: with large laterite deposits, India has a strong base for aluminium, which can replace copper in some electrical uses such as long-distance transmission lines.

Worked example 1: area of a mineral belt

Using the textbook's dimensions, the Jharkhand mica belt is about 150 km long and 22 km wide. Treating it as a rectangle, what is its approximate area? Working: 150 × 22 = 3,300 sq km. Answer: about 3,300 sq km. Real belts are irregular, so this is only a rough estimate, but it shows the belt is long and narrow.

Worked example 2: why mica suits electronics

Question: Which properties of mica make it valuable for electrical and electronic industries? Working: mica splits into very thin sheets that are tough and flexible, so it can be used as thin insulating layers between electrical parts. Answer: its ability to form thin, tough, flexible sheets (and its use as an insulator) suits electrical and electronic uses.

Worked example 3: matching minerals and states

Match: Lohardaga, Nellore, Jhunjhunu, Kalahandi. Working: Lohardaga patlands in Jharkhand have bauxite; Nellore in Andhra Pradesh has the best mica; Jhunjhunu in Rajasthan has copper; Kalahandi in Odisha is a leading bauxite area. Answer: bauxite, mica, copper, bauxite.

India is rich in ferrous minerals and bauxite but poor in other non-ferrous metals such as copper, lead and zinc; mica is its most important non-metallic mineral.

Key takeaways: India is poor in non-ferrous minerals except bauxite. Bauxite, the aluminium ore found in tertiary laterite deposits, is led by Odisha (Kalahandi, Sambalpur). Copper, vital for electrical goods, comes mainly from Singhbhum, Balaghat, Jhunjhunu and Alwar. Mica, which splits into thin, tough, flexible sheets for electrical and electronic uses, occurs in the Hazaribagh plateau, Nellore and the Jaipur-Bhilwara belt.

Check your understanding

  1. 1. Bauxite is the ore of:

    1. iron
    2. copper
    3. aluminium
    4. zinc
    Show answer

    Answer: C. Bauxite is used to manufacture aluminium.

  2. 2. According to the textbook, which state is the largest producer of bauxite?

    1. Odisha
    2. Gujarat
    3. Kerala
    4. Punjab
    Show answer

    Answer: A. Odisha is the largest producer, with Kalahandi and Sambalpur the leading areas.

  3. 3. Which district does the textbook say produces the best quality mica in Andhra Pradesh?

    1. Guntur
    2. Kurnool
    3. Anantapur
    4. Nellore
    Show answer

    Answer: D. Nellore district produces the best quality mica in Andhra Pradesh.

  4. 4. Copper is described as indispensable in the electrical industry because it:

    1. is a mineral fuel
    2. is used for wires, motors, transformers and generators
    3. contains iron
    4. is found only in the Himalaya
    Show answer

    Answer: B. Copper is used for making wires, electric motors, transformers and generators.

  5. 5. Assertion (A): Bauxite is found on plateaus and hill ranges of peninsular India. Reason (R): Bauxite is associated with laterite rocks that occur extensively there.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true, and bauxite's association with widespread laterite on those plateaus and hills explains where it is found. R explains A.

Privacy · Terms · Refunds · Delivery