• Foundation
  • About 18 min
  • 5 practice questions

Nuclear and non-conventional energy, and conserving resources

Describe India's nuclear energy minerals and power projects, explain solar, wind, tidal, geothermal and bio-energy with Indian examples, and outline strategies for conserving mineral resources.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the occurrence of uranium and thorium and India's nuclear power projects.
  • Explain the main non-conventional energy sources and where India has potential.
  • Explain how mineral resources can be conserved for sustainable development.

Fossil fuels will run out and they pollute. Non-conventional or renewable sources, solar, wind, tidal and wave, geothermal and bio-energy, are more equitably distributed and environment-friendly, and after the initial cost they can provide sustained, cheaper energy.

Nuclear energy

Nuclear energy uses uranium and thorium. Uranium occurs in Dharwar rocks: along the Singhbhum copper belt, in Udaipur, Alwar and Jhunjhunu (Rajasthan), Durg (Chhattisgarh), Bhandara (Maharashtra) and Kullu (Himachal Pradesh). Thorium comes mainly from monazite and ilmenite in the beach sands of Kerala and Tamil Nadu. According to the textbook, the world's richest monazite deposits occur in Palakkad and Kollam (Kerala), near Visakhapatnam (Andhra Pradesh) and in the Mahanadi delta (Odisha).

The Atomic Energy Commission was set up in 1948, but progress came after the Atomic Energy Institute at Trombay was set up in 1954; it was renamed the Bhabha Atomic Research Centre in 1967. Important nuclear power projects are at Tarapur (Maharashtra), Rawatbhata near Kota (Rajasthan), Kalpakkam (Tamil Nadu), Narora (Uttar Pradesh), Kaiga (Karnataka) and Kakrapar (Gujarat).

Development of India's nuclear programme

  1. 1948 Atomic Energy Commission established.
  2. 1954 Atomic Energy Institute at Trombay set up.
  3. 1967 Renamed Bhabha Atomic Research Centre.
  4. Power projects Tarapur, Rawatbhata, Kalpakkam, Narora, Kaiga, Kakrapar.

Non-conventional sources

Non-conventional energy sources
SourceHow it worksPotential or example in India (from the textbook)
SolarPhotovoltaic cells and solar thermal technology convert sunlight into energy; used in heaters, crop dryers, cookersGreater potential in the west: Gujarat and Rajasthan
WindTurbines convert the kinetic energy of wind into electricity; pollution-free and inexhaustible; planetary, seasonal (monsoon) and local winds can be usedFavourable conditions in Rajasthan, Gujarat, Maharashtra, Karnataka
Tidal and waveEnergy of tides and ocean currentsLarge tidal waves along the west coast; potential not yet utilised
GeothermalHeat from magma and hot water from geysers converted to powerA plant commissioned at Manikaran, Himachal Pradesh
Bio-energyEnergy from agricultural residues and municipal and industrial wastes, as electricity, heat or cooking gasA municipal waste-to-energy project at Okhla, Delhi

The textbook notes that the first successful attempt to tap underground heat was made in 1890 in Boise, Idaho (USA), where a hot-water pipe network heated buildings. Bio-energy has extra benefits: it processes waste, improves rural economic life, reduces pollution, raises self-reliance and reduces pressure on fuelwood.

Conventional and non-conventional energy

  • Conventional
    • Coal, petroleum, natural gas, nuclear minerals
    • Exhaustible
    • Concentrated in a few places
    • Polluting (fossil fuels)
  • Non-conventional
    • Solar, wind, tidal, geothermal, bio-energy
    • Renewable, inexhaustible
    • More equitably distributed
    • Environment-friendly; cheaper after initial cost

Conserving mineral resources

Sustainable development means combining economic development with environmental concern and protecting resources for future generations. Traditional methods of resource use generate enormous waste. The textbook suggests:

  • Develop inexhaustible alternative energy (solar, wind, wave, geothermal) to replace exhaustible sources.
  • Use scrap metals to recycle metals, especially copper, lead and zinc, in which India's reserves are meagre.
  • Use substitutes for scarce metals to reduce their consumption.
  • Reduce exports of strategic and scarce minerals so existing reserves last longer.

Worked example 1: matching source to region

A planner must choose energy sources for three made-up sites (fictional): a sunny, dry district in western Rajasthan; a windy coastal ridge in Gujarat; a Himalayan valley with hot springs. Working: high sunshine and clear skies favour solar; strong steady winds favour wind turbines; hot springs indicate geothermal heat, as at Manikaran. Answer: solar, wind and geothermal respectively.

Worked example 2: conserving a scarce metal

Question: India's copper reserves are meagre. Suggest two conservation steps from the textbook and explain each. Working: (1) recycle scrap copper from old wires and motors, which reduces the need for fresh ore; (2) use substitutes, such as aluminium, where suitable, to reduce copper consumption. Answer: recycling scrap and using substitutes (and limiting export of the scarce mineral).

Worked example 3: thorium and beach sands

Question: Why are the coasts of Kerala and Tamil Nadu important for India's nuclear future? Working: thorium is obtained from monazite and ilmenite in beach sands, and the textbook says some of the world's richest monazite deposits are in Palakkad and Kollam. Answer: they hold the monazite sands from which thorium is obtained.

Renewable sources are inexhaustible, more equitably spread and cleaner; conserving minerals means recycling scrap, using substitutes and reducing exports of scarce minerals.

Key takeaways: Uranium (Dharwar rocks, Singhbhum, Rajasthan) and thorium (monazite beach sands of Kerala and Tamil Nadu) fuel nuclear power at Tarapur, Rawatbhata, Kalpakkam, Narora, Kaiga and Kakrapar. Solar (west), wind (Rajasthan, Gujarat, Maharashtra, Karnataka), tidal (west coast, unused), geothermal (Manikaran) and bio-energy (Okhla) are renewable, widely spread and clean. Conserve minerals by renewable substitution, recycling scrap, substitutes for scarce metals and limiting exports.

Check your understanding

  1. 1. Thorium in India is obtained mainly from:

    1. Dharwar rocks of Singhbhum
    2. monazite and ilmenite in beach sands of Kerala and Tamil Nadu
    3. coal seams
    4. Himalayan glaciers
    Show answer

    Answer: B. Thorium comes mainly from monazite and ilmenite in coastal beach sands of Kerala and Tamil Nadu; uranium occurs in Dharwar rocks.

  2. 2. India's geothermal energy plant mentioned in the textbook is at:

    1. Okhla
    2. Tarapur
    3. Kalpakkam
    4. Manikaran
    Show answer

    Answer: D. A geothermal energy plant has been commissioned at Manikaran in Himachal Pradesh.

  3. 3. Which is a non-renewable source of energy?

    1. Solar
    2. Wind
    3. Thermal power from coal
    4. Hydel
    Show answer

    Answer: C. Thermal power from coal uses an exhaustible fossil fuel; solar, wind and hydel are renewable.

  4. 4. The Atomic Energy Institute at Trombay was renamed the Bhabha Atomic Research Centre in:

    1. 1967
    2. 1948
    3. 1954
    4. 1956
    Show answer

    Answer: A. The institute was set up in 1954 and renamed BARC in 1967; the Atomic Energy Commission dates from 1948.

  5. 5. Assertion (A): Use of scrap is especially significant for copper, lead and zinc in India. Reason (R): India's reserves of these metals are meagre.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true, and because reserves are meagre, recycling scrap makes the existing supply last longer. R explains A.

Privacy · Terms · Refunds · Delivery