- Foundation
- About 17 min
- 5 practice questions
Social differences, craft production and procuring materials
Explain how burials and 'luxuries' are used to trace social difference, how Chanhudaro and other centres made beads and shell objects, how production centres are identified, and how raw materials were obtained.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the two strategies archaeologists use to trace social differences: burials and the study of utilitarian objects and luxuries.
- Describe bead-making and shell-working and list the signs of a craft production centre.
- Explain the strategies by which Harappans procured raw materials within the subcontinent and from distant lands.
Were all Harappans equal? Did some live in comfort while others laboured? Writing cannot answer this, so archaeologists look at burials and at the distribution of objects. Then they ask how so many objects were made, and where their raw materials came from.
Strategy 1: burials
In Egypt, some pyramids, contemporary with the Harappans, were royal burials full of wealth. At Harappan sites the dead were generally laid in pits. Some pits were lined with bricks; whether this reflects social difference, the book says, we are not sure. Some graves contain pottery and ornaments, perhaps for use in an afterlife. Jewellery is found in burials of both men and women: at Harappa's cemetery in the mid-1980s an ornament of three shell rings, a jasper bead and hundreds of micro beads was found near a male skull. Some dead were buried with copper mirrors. On the whole, though, the Harappans did not bury precious things with the dead.
Strategy 2: utilitarian objects and luxuries
| Category | Definition | Examples from the chapter |
|---|---|---|
| Utilitarian | Objects of daily use made fairly easily from ordinary materials like stone or clay; found throughout settlements | Querns, pottery, needles, flesh-rubbers (body scrubbers) |
| Luxuries | Rare objects, or those made of costly non-local materials or by complicated technologies | Little faience pots, gold jewellery |
| Hard to classify | Everyday objects made of rare materials | Spindle whorls of faience |
Faience is made of ground sand or silica mixed with colour and gum, then fired; tiny faience pots, perhaps perfume bottles, were precious because they were difficult to make. Distribution matters: such rare objects are concentrated in large settlements like Mohenjodaro and Harappa and are absent from small ones like Kalibangan. Gold was rare, and all Harappan gold jewellery comes from hoards (objects kept carefully, often in pots, and never retrieved by their owners).
Craft production: Chanhudaro and others
Chanhudaro was tiny (less than 7 hectares, against Mohenjodaro's 125 hectares) but almost wholly devoted to crafts: bead-making, shell-cutting, metal-working, seal-making and weight-making. Beads were made of stones (carnelian, jasper, crystal, quartz, steatite), metals (copper, bronze, gold), shell, faience and terracotta, in shapes from disc and cylinder to barrel and segmented. Soft steatite was easily worked, and some beads were moulded from steatite paste; how the steatite micro bead was made is still a puzzle. Experiments show that carnelian's red colour came from firing the yellowish raw material at various stages.
Making a carnelian bead (as reconstructed by archaeologists)
- Fire the yellowish nodule Firing at various stages produced the red colour.
- Chip into a rough shape Nodules were chipped roughly.
- Flake finely Fine flaking gave the final form.
- Grind and polish Surfaces were ground smooth and polished.
- Drill Specialised drills, found at Chanhudaro, Lothal and Dholavira, made the hole.
Nageshwar and Balakot, both near the coast, specialised in shell objects such as bangles, ladles and inlay, which went to other settlements. Finished beads from Chanhudaro and Lothal probably reached the big cities.
Identifying centres of production
Archaeologists look for raw material (stone nodules, whole shells, copper ore), tools, unfinished objects, rejects and waste. Waste is one of the best indicators: cutting shell or stone leaves discarded pieces at the workplace. Larger waste was reused for small objects, but tiny bits stayed behind, which shows crafts were practised in big cities like Mohenjodaro and Harappa too.
Procuring raw materials
Clay was local, but stone, timber and metal came from beyond the alluvial plain. Terracotta bullock-cart toys suggest carts on land routes; riverine routes on the Indus and its tributaries and coastal routes were probably used. Strategies within the subcontinent included:
- Settlements near sources: Nageshwar and Balakot (shell); Shortughai in Afghanistan near the best source of lapis lazuli, a highly valued blue stone; Lothal near carnelian (Bharuch, Gujarat), steatite (south Rajasthan and north Gujarat) and metal (Rajasthan).
- Expeditions: to the Khetri region of Rajasthan for copper and to south India for gold. These created contact with local communities, shown by occasional finds of Harappan steatite micro beads there.
- Local suppliers: the Ganeshwar-Jodhpura culture of the Khetri area, with non-Harappan pottery and a wealth of copper objects, may have supplied copper.
Contact with distant lands
Copper probably also came from Oman: both Omani copper and Harappan artefacts carry traces of nickel. A large Harappan jar coated with thick black clay (to stop liquids seeping) has been found at Omani sites; perhaps its contents were exchanged for copper. Mesopotamian texts of the third millennium BCE mention Dilmun (probably Bahrain), Magan (perhaps Oman) and Meluhha (possibly the Harappan region), with products such as carnelian, lapis lazuli, copper, gold and woods. They call Meluhha a land of seafarers, and seals show ships and boats. Harappan seals, weights, dice and beads found abroad support these links; local Dilmun weights even followed the Harappan standard.
Worked example 1: utilitarian or luxury?
Classify (i) a clay quern found in every house; (ii) a faience spindle whorl. Working: (i) ordinary material, daily use, found everywhere, so utilitarian. (ii) the use is everyday (spinning) but the material is rare and hard to make, so it fits both categories; the book uses exactly this kind of object to show why classification can be complicated.
Worked example 2: reading a made-up excavation
In a made-up dig, one room yields uncut shells, half-cut bangles, broken bangles and many tiny shell chips. Is it a workshop? Working: raw material (whole shells) + unfinished objects + rejects + waste are all present; waste chips are among the best indicators. Conclusion: a shell-working area, like those at coastal Nageshwar and Balakot.
To find a craft centre, look for raw material, tools, unfinished objects, rejects and, above all, waste. To trace social difference, study burials and the distribution of rare, costly objects.
Key takeaways: Harappan burials show few precious goods, so social difference is traced mainly through the distribution of luxuries, concentrated in Mohenjodaro and Harappa. Chanhudaro was a small craft town; Nageshwar and Balakot made shell goods. Materials came from settlements near sources, expeditions (Khetri copper, south Indian gold) and distant contacts with Oman, Bahrain and Mesopotamia.
Check your understanding
-
1. Chanhudaro is described in the textbook as:
- the largest Harappan city, of 550 hectares
- a port for trade with Mesopotamia
- a tiny settlement almost exclusively devoted to craft production
- a site known for its Great Bath
Show answer
Answer: C. Chanhudaro was less than 7 hectares, compared with Mohenjodaro's 125 hectares, and was devoted almost entirely to crafts such as bead-making, shell-cutting, metal-working, seal-making and weight-making.
-
2. Which of these is considered one of the best indicators of a craft production centre?
- Gold jewellery from hoards
- Waste material from cutting shell or stone
- A brick-lined burial pit
- A seal with an animal motif
Show answer
Answer: B. When shell or stone is cut, discarded pieces stay at the place of production, so waste is one of the best indicators of craft work.
-
3. Read this source (written for this lesson): 'Metal found in our port town and ore from across the sea both show small amounts of the same unusual element, nickel.' What does this kind of evidence suggest according to the textbook?
- That the Harappans mined nickel in Rajasthan
- That copper reached the Harappans from Kashmir
- That bronze was invented in Mesopotamia
- A common origin, with copper probably brought from Oman
Show answer
Answer: D. The book says chemical analyses show nickel traces in both Omani copper and Harappan artefacts, suggesting a common origin, so copper was probably brought from Oman.
-
4. Assertion (A): Shortughai was established in far-off Afghanistan. Reason (R): It lay near the best source of lapis lazuli, a highly valued blue stone.
- Both A and R are true, and R correctly explains A.
- Both A and R are true, but R does not explain A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. The book lists Shortughai among settlements set up where raw materials were available; its nearness to the best lapis lazuli source explains its location.
-
5. In Mesopotamian texts, the name Meluhha possibly refers to:
- Bahrain
- Oman
- the Harappan region
- Egypt
Show answer
Answer: C. The texts mention Dilmun (probably Bahrain), Magan (perhaps Oman) and Meluhha, possibly the Harappan region, described as a land of seafarers.
Sign in to keep track of the lessons you finish.