- Foundation
- About 18 min
- 5 practice questions
Principal branches of tan⁻¹, cot⁻¹, sec⁻¹ and cosec⁻¹
Learn the domain and principal value range of tan⁻¹, cot⁻¹, sec⁻¹ and cosec⁻¹, see why each interval is chosen, and keep all six branches in one table.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the domain and principal range of all six inverse trigonometric functions.
- Explain which points are removed from the ranges of sec⁻¹ and cosec⁻¹, and why.
- Decide whether a given value can be a principal value.
The method of Lesson 1 works for the other four trigonometric functions too: find an interval on which the function runs through all its values exactly once, and call that the principal branch. The only new feature is that tangent and its relatives have gaps in their domains where they are undefined, so some intervals are open or have points removed.
Inverse tangent
tan x is defined for all real x except the odd multiples of π/2, and its range is all of R. On the open interval (−π/2, π/2) it rises from very large negative values to very large positive values, taking every real value exactly once. The ends ±π/2 are left out because tan is undefined there.
tan⁻¹ : R → (−π/2, π/2). y = tan⁻¹ x means tan y = x and −π/2 < y < π/2.
Inverse cotangent
cot x is undefined at the multiples of π, so it cannot use (−π/2, π/2), which contains 0. On (0, π), cot decreases from very large positive to very large negative values, taking every real value once.
cot⁻¹ : R → (0, π). y = cot⁻¹ x means cot y = x and 0 < y < π.
Inverse secant and cosecant
sec x = 1/cos x. Since |cos x| ≤ 1, |sec x| ≥ 1: the range of secant is R − (−1, 1), i.e. values ≤ −1 or ≥ 1. sec⁻¹ follows cos⁻¹ and uses [0, π], but sec is undefined at π/2 (where cos is 0), so π/2 is removed. Likewise cosec x = 1/sin x has range R − (−1, 1), and cosec⁻¹ follows sin⁻¹ on [−π/2, π/2], with 0 removed because sin 0 = 0.
sec⁻¹ : R − (−1, 1) → [0, π] − {π/2}. cosec⁻¹ : R − (−1, 1) → [−π/2, π/2] − {0}.
| Function | Domain | Principal value range |
|---|---|---|
| sin⁻¹ x | [−1, 1] | [−π/2, π/2] |
| cos⁻¹ x | [−1, 1] | [0, π] |
| tan⁻¹ x | R | (−π/2, π/2) |
| cot⁻¹ x | R | (0, π) |
| sec⁻¹ x | R − (−1, 1) | [0, π] − {π/2} |
| cosec⁻¹ x | R − (−1, 1) | [−π/2, π/2] − {0} |
Two families of principal ranges
-
Range centred on 0 (like sin⁻¹)
- sin⁻¹: [−π/2, π/2]
- tan⁻¹: (−π/2, π/2), ends open
- cosec⁻¹: [−π/2, π/2] without 0
-
Range from 0 to π (like cos⁻¹)
- cos⁻¹: [0, π]
- cot⁻¹: (0, π), ends open
- sec⁻¹: [0, π] without π/2
A quick way to remember the table: sin, tan and cosec are the 'odd' functions and keep a range symmetric about 0; cos, sec and cot keep a range from 0 to π. Tan and cot have open ends because they blow up at those ends; sec and cosec lose the single point where they are undefined.
Worked examples
Worked example 1. Find tan⁻¹(−1/√3). Working: we need y in (−π/2, π/2) with tan y = −1/√3. tan(π/6) = 1/√3 and tan is odd, so tan(−π/6) = −1/√3. Hence tan⁻¹(−1/√3) = −π/6.
Worked example 2. Find cot⁻¹(−1). Working: we need y in (0, π) with cot y = −1. cot(π/4) = 1, and cot is negative in the second quadrant: cot(π − π/4) = −1. Hence cot⁻¹(−1) = 3π/4 (not −π/4, which is outside (0, π)).
Worked example 3. Find sec⁻¹(−2). Working: sec y = −2 means cos y = −1/2. In [0, π] − {π/2}, the angle is y = 2π/3. Hence sec⁻¹(−2) = 2π/3.
Worked example 4. Find cosec⁻¹(2/√3). Working: cosec y = 2/√3 means sin y = √3/2, and in [−π/2, π/2] − {0} that gives y = π/3. Hence cosec⁻¹(2/√3) = π/3.
These examples show a useful trick: sec⁻¹ x = cos⁻¹(1/x) and cosec⁻¹ x = sin⁻¹(1/x) for |x| ≥ 1, because the ranges match. So you can always turn sec⁻¹ and cosec⁻¹ into the more familiar cos⁻¹ and sin⁻¹.
Can it be a principal value?
Before writing an answer, check it against the range. For example, 3π/4 can be a value of cos⁻¹, cot⁻¹ or sec⁻¹ but never of sin⁻¹, tan⁻¹ or cosec⁻¹; −π/4 can be a value of sin⁻¹, tan⁻¹ or cosec⁻¹ but never of cos⁻¹, cot⁻¹ or sec⁻¹; π/2 can be a value of sin⁻¹ and cos⁻¹ but never of tan⁻¹, cot⁻¹, sec⁻¹ or cosec⁻¹.
Key takeaways: tan⁻¹ and cot⁻¹ accept every real number; sec⁻¹ and cosec⁻¹ accept only |x| ≥ 1. The ranges come in two families: symmetric about 0 (sin⁻¹, tan⁻¹, cosec⁻¹) and from 0 to π (cos⁻¹, cot⁻¹, sec⁻¹). Always check that your angle lies in the right range.
Check your understanding
-
1. What is the principal value of cot⁻¹(−√3)?
- −π/6
- 5π/6
- 2π/3
- π/6
Show answer
Answer: B. We need y in (0, π) with cot y = −√3. cot(π/6) = √3, and cot is negative in the second quadrant, so y = π − π/6 = 5π/6.
-
2. What is the domain of sec⁻¹ x?
- [−1, 1]
- R
- R − {0}
- R − (−1, 1)
Show answer
Answer: D. sec x = 1/cos x and |cos x| ≤ 1, so |sec x| ≥ 1. The values of sec, which are the inputs of sec⁻¹, are x ≤ −1 or x ≥ 1, i.e. R − (−1, 1).
-
3. What is the principal value of cosec⁻¹(−√2)?
- −π/4
- 5π/4
- 3π/4
- −3π/4
Show answer
Answer: A. cosec y = −√2 means sin y = −1/√2. In [−π/2, π/2] − {0}, the angle is −π/4.
-
4. Which of these numbers can be a principal value of tan⁻¹ x for some real x?
- π/2
- −π/2
- π/3
- 2π/3
Show answer
Answer: C. The principal range of tan⁻¹ is the open interval (−π/2, π/2). π/3 is inside it (tan⁻¹ √3 = π/3). ±π/2 are excluded because tan is undefined there, and 2π/3 is too large.
-
5. Assertion (A): sec⁻¹(2) = cos⁻¹(1/2) = π/3.
Reason (R): For |x| ≥ 1, sec⁻¹ x = cos⁻¹(1/x).- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true but R is false
- A is false but R is true
Show answer
Answer: A. R holds because sec y = x is the same as cos y = 1/x, and the principal ranges [0, π] − {π/2} and [0, π] agree on the possible answers. Applying R with x = 2 gives cos⁻¹(1/2) = π/3, so A follows from R.
Sign in to keep track of the lessons you finish.