- Foundation
- About 18 min
- 5 practice questions
Why trigonometric functions need restricting: sin⁻¹ and cos⁻¹
Understand why sine and cosine have no inverse on all of R, how restricting the domain gives the principal value branches of sin⁻¹ and cos⁻¹, and how their graphs are drawn.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why sin x and cos x are not invertible on their natural domains.
- State the domain and principal value range of sin⁻¹ and cos⁻¹.
- Draw the graph of an inverse function by reflecting in the line y = x, and avoid confusing sin⁻¹ x with (sin x)⁻¹.
In Chapter 1 we proved that only a one-one and onto function has an inverse. Trigonometric functions repeat their values again and again, so on all of R they are far from one-one. Yet we constantly need to go backwards, for example to find the angle whose sine is 0.6. This chapter shows how to make that backward step well defined. Inverse trigonometric functions will also reappear in calculus, where they give the answers to many integrals.
The problem: sine repeats
sin : R → [−1, 1] is onto (its range is [−1, 1]) but not one-one: sin 0 = sin π = sin 2π = 0, and every value in [−1, 1] is taken infinitely often. So 'the angle whose sine is 0' has no single answer. The cure is to restrict the domain to an interval on which sine takes each value in [−1, 1] exactly once.
On [−π/2, π/2] the sine function increases steadily from −1 to 1, so it is one-one there and its range is all of [−1, 1]. Other intervals such as [π/2, 3π/2] or [−3π/2, −π/2] would also work, and each gives a different branch of the inverse. The branch chosen by convention is the one on [−π/2, π/2], called the principal value branch.
sin⁻¹ : [−1, 1] → [−π/2, π/2]. y = sin⁻¹ x means sin y = x and −π/2 ≤ y ≤ π/2.
The inverse cosine
cos x also takes every value in [−1, 1] infinitely often. On [0, π] it decreases steadily from 1 to −1, so it is one-one and onto [−1, 1] there. (Other choices such as [π, 2π] give other branches.) The principal branch is:
cos⁻¹ : [−1, 1] → [0, π]. y = cos⁻¹ x means cos y = x and 0 ≤ y ≤ π.
Why different intervals for sine and cosine? On [−π/2, π/2] cosine is not one-one (cos(−π/3) = cos(π/3)), and on [0, π] sine is not one-one (sin(π/6) = sin(5π/6)). Each function needs an interval on which it runs once, without turning back, through all of [−1, 1].
Principal branches of sin⁻¹ and cos⁻¹
-
sin⁻¹ x
- Domain [−1, 1]
- Range [−π/2, π/2]
- Increasing
- sin⁻¹(0) = 0, sin⁻¹(1) = π/2, sin⁻¹(−1) = −π/2
-
cos⁻¹ x
- Domain [−1, 1]
- Range [0, π]
- Decreasing
- cos⁻¹(1) = 0, cos⁻¹(0) = π/2, cos⁻¹(−1) = π
Graphs by reflection
If (a, b) lies on the graph of an invertible function f, then (b, a) lies on the graph of f⁻¹. Swapping the coordinates of every point is the same as reflecting the graph in the line y = x. So the graph of y = sin⁻¹ x is the reflection of the arc of y = sin x for −π/2 ≤ x ≤ π/2: it runs from (−1, −π/2) through (0, 0) to (1, π/2), rising all the way. Similarly y = cos⁻¹ x runs from (−1, π) through (0, π/2) down to (1, 0).
| x | −1 | −1/2 | 0 | 1/2 | 1 |
|---|---|---|---|---|---|
| sin⁻¹ x | −π/2 | −π/6 | 0 | π/6 | π/2 |
| cos⁻¹ x | π | 2π/3 | π/2 | π/3 | 0 |
Worked examples
Worked example 1. Find sin⁻¹(√3/2). Working: we need y in [−π/2, π/2] with sin y = √3/2. sin(π/3) = √3/2 and π/3 lies in the range, so sin⁻¹(√3/2) = π/3. (2π/3 also has sine √3/2, but it is outside the principal range.)
Worked example 2. Find cos⁻¹(−1/2). Working: we need y in [0, π] with cos y = −1/2. cos(π/3) = 1/2, and cosine is negative in the second quadrant: cos(π − π/3) = −cos(π/3) = −1/2. So cos⁻¹(−1/2) = 2π/3, which is in [0, π]. Note the answer is not −π/3: negative angles are never in the range of cos⁻¹.
Worked example 3. Is sin⁻¹(2) defined? No: the domain of sin⁻¹ is [−1, 1], because no angle has sine equal to 2.
A notation warning
sin⁻¹ x is the inverse function (arc sine). It is not (sin x)⁻¹ = 1/sin x = cosec x. For instance sin⁻¹(1/2) = π/6 ≈ 0.524, while (sin(1/2))⁻¹ = 1/sin(0.5) ≈ 2.09 (0.5 here in radians). Whenever no branch is mentioned, sin⁻¹, cos⁻¹ and the others mean the principal value branch, and the value they give is called the principal value.
Key takeaways: sine and cosine are made invertible by restricting them to [−π/2, π/2] and [0, π] respectively. sin⁻¹ and cos⁻¹ both have domain [−1, 1]; their principal ranges are [−π/2, π/2] and [0, π]. Graphs of inverses are reflections in y = x, and sin⁻¹ x never means 1/sin x.
Check your understanding
-
1. What is the principal value of sin⁻¹(−√3/2)?
- 4π/3
- −π/3
- 2π/3
- −2π/3
Show answer
Answer: B. We need y in [−π/2, π/2] with sin y = −√3/2. sin(−π/3) = −sin(π/3) = −√3/2, and −π/3 lies in the range. The other angles have the right sine (4π/3, −2π/3) or the wrong sign (2π/3), and none of them lies in [−π/2, π/2].
-
2. What is the principal value of cos⁻¹(−√3/2)?
- −π/6
- 7π/6
- 5π/6
- π/6
Show answer
Answer: C. We need y in [0, π] with cos y = −√3/2. cos(π − π/6) = −cos(π/6) = −√3/2, so y = 5π/6, which is in [0, π].
-
3. Which interval is the range of the principal value branch of cos⁻¹?
- [0, π]
- [−π/2, π/2]
- (0, π)
- [0, 2π)
Show answer
Answer: A. The principal branch of cos⁻¹ is cos⁻¹ : [−1, 1] → [0, π]. Both ends are included, since cos⁻¹(1) = 0 and cos⁻¹(−1) = π.
-
4. Assertion (A): sin⁻¹(1/2) = π/6.
Reason (R): sin⁻¹ x is the same as 1/sin x.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true but R is false
- A is false but R is true
Show answer
Answer: C. A is true: sin(π/6) = 1/2 and π/6 is in [−π/2, π/2]. R is false: sin⁻¹ x is the inverse function; 1/sin x is (sin x)⁻¹ = cosec x.
-
5. For which value of x is cos⁻¹ x NOT defined?
- x = −1
- x = 0
- x = 0.99
- x = 1.2
Show answer
Answer: D. The domain of cos⁻¹ is [−1, 1] because cosine never goes above 1 or below −1. 1.2 is outside this interval; the other three values are inside.
Sign in to keep track of the lessons you finish.