Revision notes

Chapter 2 Inverse Trigonometric Functions: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Why trigonometric functions need restricting: sin⁻¹ and cos⁻¹

sin⁻¹ : [−1, 1] → [−π/2, π/2]. y = sin⁻¹ x means sin y = x and −π/2 ≤ y ≤ π/2.

— Principal branch of arc sine

cos⁻¹ : [−1, 1] → [0, π]. y = cos⁻¹ x means cos y = x and 0 ≤ y ≤ π.

— Principal branch of arc cosine

Principal branches of sin⁻¹ and cos⁻¹

  • sin⁻¹ x
    • Domain [−1, 1]
    • Range [−π/2, π/2]
    • Increasing
    • sin⁻¹(0) = 0, sin⁻¹(1) = π/2, sin⁻¹(−1) = −π/2
  • cos⁻¹ x
    • Domain [−1, 1]
    • Range [0, π]
    • Decreasing
    • cos⁻¹(1) = 0, cos⁻¹(0) = π/2, cos⁻¹(−1) = π
Points for sketching the principal branches
x−1−1/201/21
sin⁻¹ x−π/2−π/60π/6π/2
cos⁻¹ xπ2π/3π/2π/30

Key takeaways: sine and cosine are made invertible by restricting them to [−π/2, π/2] and [0, π] respectively. sin⁻¹ and cos⁻¹ both have domain [−1, 1]; their principal ranges are [−π/2, π/2] and [0, π]. Graphs of inverses are reflections in y = x, and sin⁻¹ x never means 1/sin x.

Read the full lesson

Lesson 2

Principal branches of tan⁻¹, cot⁻¹, sec⁻¹ and cosec⁻¹

tan⁻¹ : R → (−π/2, π/2). y = tan⁻¹ x means tan y = x and −π/2 < y < π/2.

— Principal branch of arc tangent

cot⁻¹ : R → (0, π). y = cot⁻¹ x means cot y = x and 0 < y < π.

— Principal branch of arc cotangent

sec⁻¹ : R − (−1, 1) → [0, π] − {π/2}. cosec⁻¹ : R − (−1, 1) → [−π/2, π/2] − {0}.

— Principal branches of arc secant and arc cosecant
The six principal value branches
FunctionDomainPrincipal value range
sin⁻¹ x[−1, 1][−π/2, π/2]
cos⁻¹ x[−1, 1][0, π]
tan⁻¹ xR(−π/2, π/2)
cot⁻¹ xR(0, π)
sec⁻¹ xR − (−1, 1)[0, π] − {π/2}
cosec⁻¹ xR − (−1, 1)[−π/2, π/2] − {0}

Two families of principal ranges

  • Range centred on 0 (like sin⁻¹)
    • sin⁻¹: [−π/2, π/2]
    • tan⁻¹: (−π/2, π/2), ends open
    • cosec⁻¹: [−π/2, π/2] without 0
  • Range from 0 to π (like cos⁻¹)
    • cos⁻¹: [0, π]
    • cot⁻¹: (0, π), ends open
    • sec⁻¹: [0, π] without π/2
Pair each function with its reciprocal: sin with cosec, cos with sec, tan with cot.

Key takeaways: tan⁻¹ and cot⁻¹ accept every real number; sec⁻¹ and cosec⁻¹ accept only |x| ≥ 1. The ranges come in two families: symmetric about 0 (sin⁻¹, tan⁻¹, cosec⁻¹) and from 0 to π (cos⁻¹, cot⁻¹, sec⁻¹). Always check that your angle lies in the right range.

Read the full lesson

Lesson 3

Finding principal values, including negative arguments

Finding a principal value

  1. Ignore the sign Find the acute reference angle α whose trigonometric ratio equals |x|.
  2. Recall the range Is the principal range symmetric about 0 or from 0 to π?
  3. Place the angle Positive x: answer α. Negative x: answer −α (symmetric family) or π − α (0 to π family).
  4. Check Confirm the answer lies in the range and has the required ratio.
Negative-argument rules
Symmetric family (odd)0 to π family
sin⁻¹(−x) = −sin⁻¹ x, |x| ≤ 1cos⁻¹(−x) = π − cos⁻¹ x, |x| ≤ 1
tan⁻¹(−x) = −tan⁻¹ x, x ∈ Rcot⁻¹(−x) = π − cot⁻¹ x, x ∈ R
cosec⁻¹(−x) = −cosec⁻¹ x, |x| ≥ 1sec⁻¹(−x) = π − sec⁻¹ x, |x| ≥ 1

Odd family (sin⁻¹, tan⁻¹, cosec⁻¹): the minus sign comes outside. The 0 to π family (cos⁻¹, cot⁻¹, sec⁻¹): f⁻¹(−x) = π − f⁻¹(x).

— Rule to remember
Principal values worth knowing
ExpressionValue
sin⁻¹(1/2)π/6
cos⁻¹(−1/√2)3π/4
tan⁻¹(−√3)−π/3
cot⁻¹(−1/√3)2π/3
sec⁻¹(−√2)3π/4
cosec⁻¹(−2)−π/6

Key takeaways: find the reference angle, then place it using the range family. Odd family: put a minus sign outside. The 0 to π family: subtract from π. Simplify sums with a common denominator and check each piece lies in its range.

Read the full lesson

Lesson 4

Compositions: sin(sin⁻¹ x) and sin⁻¹(sin x)

sin(sin⁻¹ x) = x for every x in [−1, 1]. sin⁻¹(sin x) = x only for x in [−π/2, π/2]. Similarly cos(cos⁻¹ x) = x on [−1, 1], but cos⁻¹(cos x) = x only for x in [0, π]; tan(tan⁻¹ x) = x for all real x, but tan⁻¹(tan x) = x only for x in (−π/2, π/2).

— Composition rules

Evaluating sin⁻¹(sin θ), cos⁻¹(cos θ) or tan⁻¹(tan θ)

  1. Is θ already in the principal range? If yes, the answer is θ itself.
  2. If not, find the same ratio Use identities such as sin(π − θ) = sin θ, cos(2π − θ) = cos θ, cos(−θ) = cos θ, tan(θ − π) = tan θ.
  3. Choose the angle in range Pick the equivalent angle that lies in the principal range.
  4. Check The answer must lie in the range and give the same ratio.
Bring the angle into the principal range first
ExpressionIs the angle in range?Equivalent angle in rangeValue
sin⁻¹(sin π/5)Yesπ/5π/5
sin⁻¹(sin 5π/6)Noπ − 5π/6 = π/6π/6
cos⁻¹(cos 7π/6)No2π − 7π/6 = 5π/65π/6
tan⁻¹(tan 3π/4)No3π/4 − π = −π/4−π/4
cos⁻¹(cos(−π/3))Noπ/3π/3

Key takeaways: f(f⁻¹(x)) = x whenever it is defined, but f⁻¹(f(θ)) = θ only for θ in the principal range. Otherwise replace θ by the equivalent angle in range. For mixed expressions, name the inner angle, draw a right triangle, and fix the sign from the principal range.

Read the full lesson

Lesson 5

Simplifying inverse trigonometric expressions by substitution

Substitution guide
If you seeSubstituteBecause
√(1 − x²)x = sin θ (or cos θ)1 − sin²θ = cos²θ
√(1 + x²) or 1 + x²x = tan θ1 + tan²θ = sec²θ
√(x² − 1)x = sec θsec²θ − 1 = tan²θ
1 − cos x, 1 + cos x, sin xhalf-angle formulas1 − cos x = 2 sin²(x/2), 1 + cos x = 2 cos²(x/2), sin x = 2 sin(x/2) cos(x/2)
2x/(1 − x²), 1 − 2x², 2x² − 1double-angle formulastan 2θ, cos 2θ

Simplifying by substitution

  1. Spot the pattern Look for 1 − x², 1 + x², x² − 1 or half and double angles.
  2. Substitute Put x = sin θ, tan θ, etc., and record the interval of θ.
  3. Use an identity Reduce the inside to a single ratio of one angle, kθ.
  4. Cancel carefully f⁻¹(f(kθ)) = kθ only if kθ is in the principal range.
  5. Return to x Replace θ by sin⁻¹ x, tan⁻¹ x, etc.

Substitute, simplify with an identity, then cancel only if the angle lies in the principal range. Always state the interval of x.

— Method

Key takeaways: let the shape of the expression choose the substitution; use Pythagorean, half-angle or double-angle identities to reach f⁻¹(f(kθ)); cancel only when kθ is in the principal range; and always write the interval of x for which your simplified form holds.

Read the full lesson

Privacy · Terms · Refunds · Delivery