• Foundation
  • About 17 min
  • 5 practice questions

Adding vectors and multiplying by a scalar

Add vectors by the triangle and parallelogram laws, subtract them, use the properties of addition, and multiply a vector by a scalar to change its length or reverse it.

If something looks wrong, please tell us.

If you walk 3 km east and then 4 km north, you end up 5 km from where you started, not 7 km. Displacements, velocities and forces combine by a rule that takes direction into account. This lesson sets out that rule and the simplest operation that changes a vector, multiplying it by a number.

Triangle law of addition

Vector AB means the displacement from A to B. Moving from A to B and then from B to C has the same net effect as moving from A to C. So AB + BC = AC. In general, to add a and b, place the initial point of b at the terminal point of a (moving b parallel to itself); then a + b is the vector from the initial point of a to the terminal point of b. This is the triangle law of vector addition.

Since AC + CA = AA = 0, the triangle law also gives AB + BC + CA = 0: the sides of a triangle taken in order add to the zero vector. Similarly, for any closed polygon ABCD, AB + BC + CD + DA = 0.

Parallelogram law and subtraction

If a and b are represented by two adjacent sides of a parallelogram drawn from a common point, then a + b is represented by the diagonal through that common point. This parallelogram law is equivalent to the triangle law, because the side opposite b in the parallelogram is a vector equal to b. The difference a − b is defined as a + (−b), where −b has the same length as b and the opposite direction. In the parallelogram, a − b is the other diagonal (from the tip of b to the tip of a).

Two equivalent laws of addition

  • Triangle law
    • Join vectors head to tail
    • Sum runs from first tail to last head
    • AB + BC = AC
    • Natural for successive displacements
  • Parallelogram law
    • Draw both vectors from one point
    • Sum is the diagonal from that point
    • Other diagonal gives a − b
    • Natural for simultaneous velocities or forces

Properties of vector addition

  1. Commutative: a + b = b + a. In parallelogram ABCD with AB = a and BC = b, triangle ABC gives AC = a + b, and triangle ADC (AD = b, DC = a) gives AC = b + a.
  2. Associative: (a + b) + c = a + (b + c), so a sum of three vectors can be written without brackets.
  3. Additive identity: a + 0 = 0 + a = a.
  4. Additive inverse: a + (−a) = 0.

Multiplying a vector by a scalar

For a vector a and a real number λ, the vector λa is collinear with a, has magnitude |λa| = |λ| |a|, and has the same direction as a if λ > 0 and the opposite direction if λ < 0. If λ = 0, λa = 0. For example, 3a is three times as long as a in the same direction, and −(1/2)a is half as long in the opposite direction. Taking λ = 1/|a| (for a ≠ 0) gives the unit vector â = a/|a| in the direction of a.

Two useful facts follow. (1) Vectors a and b (non-zero) are collinear if and only if b = λa for some non-zero scalar λ. (2) Scalar multiplication obeys the distributive laws k(a + b) = ka + kb and (k + m)a = ka + ma, and also k(ma) = (km)a.

AB + BC = AC; a − b = a + (−b); |λa| = |λ| |a|; â = a/|a|; b is collinear with a exactly when b = λa.

Worked examples

Worked example 1: crossing a river

A boat is steered straight across a river at 4 m/s (relative to the water), while the river flows at 3 m/s. The two velocities are perpendicular, so by the parallelogram law the resultant velocity is the diagonal of a 4 by 3 rectangle. Its magnitude is √(4² + 3²) = 5 m/s, and it makes an angle θ with the intended direction where tan θ = 3/4, about 37° downstream.

Worked example 2: the median of a triangle

In triangle ABC, D is the midpoint of BC. Show that AB + AC = 2AD. By the triangle law, AB = AD + DB and AC = AD + DC. Adding, AB + AC = 2AD + (DB + DC). Since D is the midpoint, DB and DC have equal length and opposite directions, so DB + DC = 0. Hence AB + AC = 2AD. (Equivalently, AD is half the diagonal of the parallelogram on AB and AC.)

Worked example 3: scaling

If |a| = 4, describe −3a and find the unit vector along −3a. |−3a| = |−3| × 4 = 12, and −3a points opposite to a. Its unit vector is (−3a)/12 = −a/4 = −â: a unit vector along a negative multiple of a is −â.

Worked example 4: a difference

Simplify AB − AC. AB − AC = AB + CA = CA + AB = CB, using the commutative law and the triangle law (C to A, then A to B).

Key takeaways

  • Add head to tail (triangle law) or along the diagonal (parallelogram law).
  • Sides of a closed figure taken in order add to the zero vector.
  • Addition is commutative and associative; 0 is the identity and −a the inverse.
  • λa has length |λ| |a| and reverses direction when λ < 0.
  • Non-zero a and b are collinear exactly when b = λa.

Check your understanding

  1. 1. In any triangle ABC, AB + BC + CA equals

    1. 2AC
    2. the zero vector
    3. AC
    4. −AC
    Show answer

    Answer: B. AB + BC = AC by the triangle law, and AC + CA = AA, which is the zero vector. Going round a closed figure returns to the start.

  2. 2. Two velocities of 6 m/s and 8 m/s act on a body at right angles to each other. What is the magnitude of the resultant velocity in m/s?

    1. 14
    2. 2
    3. 10
    4. 48
    Show answer

    Answer: C. The resultant is the diagonal of a 6 by 8 rectangle: √(36 + 64) = √100 = 10 m/s. Adding 6 and 8 to get 14 ignores the directions.

  3. 3. If |a| = 4, what is |−3a|?

    1. −12
    2. 4/3
    3. 7
    4. 12
    Show answer

    Answer: D. |λa| = |λ| |a| = |−3| × 4 = 3 × 4 = 12. A magnitude is never negative; the minus sign only reverses the direction.

  4. 4. AB − AC is equal to

    1. BC
    2. CB
    3. CA
    4. 2AB
    Show answer

    Answer: B. AB − AC = AB + CA = CA + AB. Going from C to A and then from A to B is the same as going from C to B, so the result is CB.

  5. 5. Assertion (A): For any two vectors a and b, a + b = b + a. Reason (R): Opposite sides of a parallelogram, taken in the same sense, represent equal vectors.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. In parallelogram ABCD with AB = a and BC = b, R gives DC = a and AD = b. Then AC = a + b (triangle ABC) and AC = b + a (triangle ADC), which proves A using R.

Privacy · Terms · Refunds · Delivery