• Foundation
  • About 16 min
  • 5 practice questions

Vectors: basic concepts and types

Tell scalars from vectors, describe a vector by its magnitude and direction, find the position vector, direction cosines and direction ratios of a point, and name the types of vectors.

If something looks wrong, please tell us.

Some quantities are fully described by a single number with a unit: a height of 1.6 m, a mass of 12 kg, a temperature of 25 °C. Others also need a direction: a football pass, a push on a door, a flight from Delhi to Mumbai. The first kind are scalars; the second are vectors. Vectors are the language of mechanics, electricity and three-dimensional geometry, and this chapter builds their algebra. In the teaching text a vector is printed in bold, like a; in the questions, where bold is not available, the words 'vector a' make the meaning clear.

Scalars and vectors

A scalar is a quantity that has magnitude only, a real number (with a unit). Examples: length, mass, time, distance, speed, area, volume, temperature, work, density, money. A vector is a quantity that has both magnitude and direction. Examples: displacement, velocity, acceleration, force, weight, momentum.

Geometrically, a vector is a directed line segment. The vector from point A to point B is written as vector AB. A is its initial point and B its terminal point. Its magnitude (length), written |AB|, is the distance between A and B; the arrow shows its direction. A magnitude is never negative.

Position vector, direction cosines and direction ratios

Take the right-handed rectangular coordinate system with origin O. For a point P(x, y, z), the vector OP is called the position vector of P with respect to O. By the distance formula its magnitude is |OP| = r = √(x² + y² + z²).

Let OP make angles α, β, γ with the positive x-, y- and z-axes. These are the direction angles, and their cosines l = cos α, m = cos β, n = cos γ are the direction cosines of OP. From the right triangles formed by dropping perpendiculars to the axes, cos α = x/r, cos β = y/r, cos γ = z/r, so the point is (lr, mr, nr). Numbers proportional to the direction cosines, such as x, y, z themselves, are called direction ratios (a, b, c). Since x² + y² + z² = r², dividing by r² gives l² + m² + n² = 1; but in general a² + b² + c² ≠ 1.

For P(x, y, z): |OP| = √(x² + y² + z²); direction cosines l = x/r, m = y/r, n = z/r; and l² + m² + n² = 1.

Worked example 1

For P(2, −3, 6), find |OP| and the direction cosines of OP. r = √(4 + 9 + 36) = √49 = 7. The direction cosines are 2/7, −3/7, 6/7. Check: 4/49 + 9/49 + 36/49 = 49/49 = 1. ✓ The direction ratios can be taken as 2, −3, 6 (or any non-zero multiple such as 4, −6, 12).

Types of vectors

Types of vectors
TypeMeaningExample
Zero (null) vectorInitial and terminal points coincide; magnitude 0; no definite direction (may be taken as any direction)Vector AA, written 0
Unit vectorMagnitude exactly 1; the unit vector along a is written ââ = a/|a|
Coinitial vectorsTwo or more vectors with the same initial pointAB and AC
Collinear vectorsParallel to the same line, whatever their magnitudes and directionsa, 2a and −5a
Equal vectorsSame magnitude and same direction, wherever their initial points areOpposite sides AB and DC of a parallelogram ABCD
Negative of a vectorSame magnitude, opposite directionBA = −AB

The vectors in this chapter may be moved parallel to themselves without changing their magnitude or direction; such vectors are called free vectors. That is why two equal vectors need not start from the same point.

Vectors classified

  • By magnitude
    • Zero vector: magnitude 0
    • Unit vector: magnitude 1
  • By position
    • Coinitial: same initial point
  • By direction
    • Collinear: parallel to one line
    • Equal: same magnitude and same direction
    • Negative: same magnitude, opposite direction

Worked example 2: classifying quantities

Classify as scalar or vector: (i) 12 kg; (ii) 60 km/h; (iii) a force of 5 N acting vertically downwards; (iv) 300 J of work; (v) a displacement of 4 m towards the east; (vi) 1.2 g/cm³. Answers: (i) mass, scalar; (ii) speed, scalar (no direction given); (iii) force, vector; (iv) work, scalar; (v) displacement, vector; (vi) density, scalar.

Worked example 3: representing a displacement

Represent a displacement of 30 km, 60° east of north. Draw the north direction from a point O, turn 60° towards the east, and draw a segment of length 3 units (scale 1 unit = 10 km) with an arrow at its far end, P. Vector OP is the displacement. Its direction is fixed by the angle and its magnitude by the length.

Key takeaways

  • A scalar has magnitude only; a vector has magnitude and direction.
  • The position vector of P(x, y, z) has magnitude √(x² + y² + z²).
  • Direction cosines satisfy l² + m² + n² = 1; direction ratios are any numbers proportional to them.
  • Equal vectors need the same magnitude and direction; collinear vectors need only be parallel to one line.
  • The zero vector has no definite direction.

Check your understanding

  1. 1. Which of these is a vector quantity?

    1. Work done
    2. A speed of 40 km/h
    3. A displacement of 3 m due north
    4. Density
    Show answer

    Answer: C. A displacement of 3 m due north has both magnitude (3 m) and direction (north). Work, speed and density have magnitude only.

  2. 2. What is the magnitude of the position vector of P(2, −3, 6)?

    1. 7
    2. 11
    3. √11
    4. 49
    Show answer

    Answer: A. |OP| = √(2² + (−3)² + 6²) = √(4 + 9 + 36) = √49 = 7.

  3. 3. What are the direction cosines of the position vector of P(2, −3, 6)?

    1. 2, −3, 6
    2. 2/7, −3/7, 6/7
    3. 2/11, −3/11, 6/11
    4. 2/49, −3/49, 6/49
    Show answer

    Answer: B. r = 7, so l = 2/7, m = −3/7, n = 6/7. Check: (4 + 9 + 36)/49 = 1. The numbers 2, −3, 6 are direction ratios, not cosines.

  4. 4. Which statement is correct?

    1. A unit vector has magnitude 0
    2. The zero vector has a definite direction
    3. Equal vectors must have the same initial point
    4. A vector and its negative are collinear
    Show answer

    Answer: D. A vector a and −a lie along parallel lines (they differ only in sense), so they are collinear. A unit vector has magnitude 1, the zero vector has no definite direction, and free equal vectors may start at different points.

  5. 5. Assertion (A): There is a vector whose direction cosines are 1/2, 1/2, 1/2. Reason (R): The direction cosines l, m, n of any vector satisfy l² + m² + n² = 1.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. R is true. For 1/2, 1/2, 1/2 the sum of squares is 1/4 + 1/4 + 1/4 = 3/4 ≠ 1, so by R these cannot be direction cosines. A is false.

Privacy · Terms · Refunds · Delivery