- Foundation
- About 20 min
- 5 practice questions
Diamagnetism, paramagnetism and ferromagnetism
Classify materials by susceptibility, explain diamagnetism, paramagnetism and ferromagnetism at the atomic and domain level, and describe superconductors, hard and soft ferromagnets and the effect of temperature.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify materials as diamagnetic, paramagnetic or ferromagnetic using χ and μr.
- Explain each type of behaviour from the magnetic moments of atoms.
- Describe magnetic domains and the difference between hard and soft ferromagnets.
- Explain the Meissner effect and the effect of temperature on magnetic materials.
Why does a magnet pick up iron nails but not aluminium foil, and why can a piece of bismuth be gently pushed away by a strong magnet? The answer lies in how the magnetic moments of atoms respond to a field. Using the susceptibility from the last lesson, materials fall into three classes.
| Property | Diamagnetic | Paramagnetic | Ferromagnetic |
|---|---|---|---|
| Susceptibility χ | −1 ≤ χ < 0 (small, negative) | 0 < χ < ε (small, positive) | χ ≫ 1 |
| Relative permeability μr | 0 ≤ μr < 1 | Slightly more than 1 | μr ≫ 1 (can exceed 1000) |
| Permeability μ | μ < μ₀ | μ > μ₀ | μ ≫ μ₀ |
| In a non-uniform field | Moves weak-ward (repelled) | Moves strong-ward (weakly attracted) | Moves strong-ward (strongly attracted) |
| Field lines in the sample | Slightly pushed out | Slightly concentrated | Strongly concentrated |
| Examples | Bismuth, copper, lead, silicon, water, NaCl, nitrogen (at STP) | Aluminium, sodium, calcium, oxygen (at STP), copper chloride | Iron, cobalt, nickel, gadolinium |
Diamagnetism
Electrons orbiting a nucleus are like tiny current loops with orbital magnetic moments. In a diamagnetic substance these moments cancel in every atom, so the atom has no net moment. When a field is applied, electrons whose orbital moments point along the field slow down slightly and those opposite speed up (an induction effect explained by Lenz's law in the next chapter). The atom gains a small net moment opposite to the field, so the sample is repelled from strong-field regions and the field inside it is reduced, typically by about one part in 10⁵.
Diamagnetism is present in all substances, but it is so weak that paramagnetism or ferromagnetism usually hides it. The extreme case is a superconductor - certain metals cooled to very low temperatures - which shows both perfect conductivity and perfect diamagnetism: χ = −1, μr = 0, and field lines are completely expelled (the Meissner effect). A superconductor repels a magnet, and the magnet repels it; this can levitate a magnet or, in principle, a train.
Paramagnetism
In a paramagnetic material each atom, ion or molecule has its own permanent magnetic moment. Random thermal motion keeps them pointing in all directions, so normally there is no net magnetisation. An applied field partly lines them up, giving a small magnetisation along the field: the sample is weakly attracted and the field inside is slightly enhanced, again by about one part in 10⁵. Stronger fields and lower temperatures align the moments better, until at saturation all of them point along the field. So χ for a paramagnet depends on temperature as well as on the material.
Ferromagnetism
In a ferromagnet the atomic moments interact so strongly that they line up spontaneously over regions called domains (a typical domain is around a millimetre across and holds an enormous number of atoms; the explanation of this cooperation needs quantum mechanics). Each domain is fully magnetised, but in an unmagnetised sample the domains point randomly and cancel.
Magnetising a ferromagnet
- Random domains Each domain magnetised, but directions random: no net M.
- Field applied Domains along the field grow; others shrink and turn.
- Strong field Domains merge into a single giant domain along the field.
- Field removed Hard ferromagnet keeps its magnetisation; soft ferromagnet loses it.
Domains are not just a theory: they can be watched under a microscope by sprinkling a liquid suspension of fine ferromagnetic powder on the sample. Hard ferromagnets, such as alnico (an alloy of iron, aluminium, nickel, cobalt and copper) and naturally occurring lodestone, keep their magnetisation after the field is removed and are used for permanent magnets and compass needles. Soft ferromagnets, such as soft iron, lose it, which suits electromagnet cores. Ferromagnetism depends on temperature: heated enough, a ferromagnet gradually loses its domain structure and becomes paramagnetic.
Hard and soft ferromagnetic materials
-
Hard (e.g. alnico, lodestone)
- Keeps magnetisation after the field is removed
- Used for permanent magnets
- Used in compass needles
-
Soft (e.g. soft iron)
- Magnetisation disappears when the field is removed
- Used for electromagnet cores
- Easily magnetised and demagnetised
Worked example 1: how much does the field change?
A long solenoid produces B₀ = 0.50 T when empty. Filled with a paramagnetic liquid of χ = 2.0 × 10⁻⁵, the field becomes B = μ₀(1 + χ)H = B₀(1 + χ) = 0.50 × 1.00002 = 0.50001 T - an increase of only 1.0 × 10⁻⁵ T. With a diamagnetic core of χ = −1.0 × 10⁻⁵, it falls by 5 × 10⁻⁶ T. With a ferromagnetic core it could rise to the order of a tesla even from a much weaker B₀.
Worked example 2: comparing cores
For H = 500 A m⁻¹: an empty solenoid gives B = μ₀H = 4π × 10⁻⁷ × 500 ≈ 6.3 × 10⁻⁴ T. A soft-iron-like core with μr = 2000 gives B = 2000 × 6.3 × 10⁻⁴ ≈ 1.26 T. A superconducting core (μr = 0) gives B = 0 inside it - the field is expelled entirely.
Key takeaways
- Diamagnetic: χ small negative; no permanent atomic moments; induced moments oppose the field; universal but weak; superconductors are perfect diamagnets.
- Paramagnetic: χ small positive; permanent moments partly aligned against thermal agitation; better aligned at low temperature.
- Ferromagnetic: χ ≫ 1; domains; hard materials make permanent magnets, soft ones make electromagnet cores; above a high enough temperature they become paramagnetic.
Check your understanding
-
1. A material placed in a non-uniform magnetic field moves slowly from the strong-field region to the weak-field region. It is
- paramagnetic
- ferromagnetic
- diamagnetic
- a hard magnetic material
Show answer
Answer: C. Diamagnetic materials develop a moment opposite to the applied field, so they are pushed towards weaker field. Para- and ferromagnetic materials move towards stronger field.
-
2. Which property is true of a superconductor in its superconducting state?
- χ = 0 and μr = 1
- χ = −1 and μr = 0
- χ = +1 and μr = 2
- χ ≫ 1
Show answer
Answer: B. A superconductor is a perfect diamagnet: it expels the field completely, so χ = −1 and μr = 1 + χ = 0 (the Meissner effect).
-
3. Why does the magnetisation of a paramagnetic sample increase when it is cooled (in the same field)?
- Its atoms lose their magnetic moments
- Domains form at low temperature
- Its electrons stop orbiting
- Thermal agitation, which disturbs the alignment of atomic moments, becomes weaker
Show answer
Answer: D. Paramagnetic atoms have permanent moments that the field tries to align and thermal motion tries to randomise. Lower temperature means less agitation, so more moments line up and M increases.
-
4. Which material is most suitable for the core of an electromagnet that must be switched on and off often?
- Soft iron
- Alnico
- Copper
- Lodestone
Show answer
Answer: A. An electromagnet core should magnetise strongly and lose its magnetisation when the current stops. Soft iron is a soft ferromagnet with exactly these properties; alnico and lodestone keep their magnetisation, and copper is diamagnetic.
-
5. Assertion (A): Diamagnetism is present in all materials. Reason (R): In para- and ferromagnetic materials the diamagnetic effect is usually masked by their much stronger response.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: B. Both statements are true. A is true because every atom's orbital electrons respond to an applied field in the way that produces diamagnetism. R explains why we do not notice it in some materials, but it does not explain why diamagnetism is universal. So R is not the correct explanation of A.
Sign in to keep track of the lessons you finish.