• Foundation
  • About 20 min
  • 5 practice questions

Magnetisation, magnetic intensity and susceptibility

Define magnetisation M, magnetic intensity H, susceptibility χ and relative permeability μr, use B = μ₀(H + M) = μ₀μrH, and solve problems on a solenoid with a magnetic core.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define magnetisation M and give its unit.
  • Explain how H separates the field due to external currents from that due to the material.
  • Use B = μ₀(H + M), M = χH, μr = 1 + χ and μ = μ₀μr.
  • Solve problems on a solenoid filled with a magnetic material.

Put an iron core inside a solenoid and the field inside becomes hundreds of times stronger. Put a copper core in and the field hardly changes - and actually decreases very slightly. To describe and classify such behaviour we need a few new quantities.

Magnetisation

Electrons orbiting in atoms (and their intrinsic moments) give atoms magnetic moments. In a bulk sample these add as vectors and may give a net magnetic moment. The magnetisation M is the net magnetic moment per unit volume:

M = m_net / V. M is a vector with dimensions [L⁻¹ A]; SI unit A m⁻¹.

Magnetic intensity H

A long solenoid with n turns per unit length and current I has field B₀ = μ₀nI inside when empty. Fill it with a magnetised material and the field becomes B = B₀ + B_m, where the material's contribution is B_m = μ₀M. It is useful to define the magnetic intensity H by:

H = B/μ₀ − M, so B = μ₀(H + M). H has the same unit as M, A m⁻¹. In a long solenoid, H = nI, whatever the core.

This splits the field into a part set by external causes, such as the current in the windings (H), and a part due to the material's own response (M). For many materials the response is proportional to H:

M = χH, where χ is the dimensionless magnetic susceptibility. Then B = μ₀(1 + χ)H = μ₀μr H = μH, with relative permeability μr = 1 + χ and permeability μ = μ₀μr.

χ, μr and μ are linked, so knowing one gives the other two. μr plays the same role in magnetism as the dielectric constant K in electrostatics. χ measures how strongly a material responds: small and positive for paramagnetic materials, small and negative for diamagnetic ones (M opposite to H), large and positive for ferromagnetic ones.

From the current in the windings to the field in the core

  1. Current I in n turns per metre Sets the magnetic intensity H = nI.
  2. Material responds Magnetisation M = χH.
  3. Total field B = μ₀(H + M) = μ₀μr H.
Magnetic quantities of materials
QuantitySymbolUnitRelation
MagnetisationMA m⁻¹Net magnetic moment per unit volume
Magnetic intensityHA m⁻¹H = B/μ₀ − M; H = nI in a solenoid
SusceptibilityχNoneM = χH
Relative permeabilityμrNoneμr = 1 + χ
PermeabilityμT m A⁻¹μ = μ₀μr; B = μH

Worked example 1: solenoid with a core

A solenoid with 800 turns per metre carries 2.5 A. Its core has μr = 500.

  1. H = nI = 800 × 2.5 = 2000 A m⁻¹ (independent of the core).
  2. B = μrμ₀H = 500 × 4π × 10⁻⁷ × 2000 ≈ 1.26 T. Without the core it would be μ₀H ≈ 2.5 × 10⁻³ T.
  3. χ = μr − 1 = 499, so M = χH = 499 × 2000 ≈ 1.0 × 10⁶ A m⁻¹.
  4. The extra current that would give the same B without a core (the magnetising current) is I_M with μ₀n(I + I_M) = B, so I + I_M = μr I = 1250 A and I_M ≈ 1247.5 A.

Worked example 2: weak magnetic materials

In H = 1000 A m⁻¹, a paramagnetic sample with χ = 2 × 10⁻⁵ gets M = χH = 0.02 A m⁻¹ along H; its μr = 1.00002. A diamagnetic sample with χ = −1 × 10⁻⁵ gets M = −0.01 A m⁻¹, opposite to H; its μr = 0.99999. Both change the field by only about one part in 10⁵, which is why such materials seem 'non-magnetic' in everyday life.

Worked example 3: moment of a magnetised bar

A soft iron bar of volume 1.0 × 10⁻⁵ m³ (for example 10 cm × 1 cm²) is magnetised to M = 8 × 10⁵ A m⁻¹. Its magnetic moment is m = MV = 8 × 10⁵ × 1.0 × 10⁻⁵ = 8 A m², far larger than that of a typical small current-carrying coil.

Key takeaways

  • M = magnetic moment per unit volume (A m⁻¹).
  • B = μ₀(H + M); in a solenoid H = nI.
  • M = χH; μr = 1 + χ; μ = μ₀μr; B = μH.
  • χ: small negative (dia), small positive (para), large positive (ferro).

Check your understanding

  1. 1. A long solenoid has 1200 turns per metre and carries 0.5 A. What is the magnetic intensity H inside it?

    1. 600 A m⁻¹
    2. 2400 A m⁻¹
    3. 7.5 × 10⁻⁴ A m⁻¹
    4. 1200 A m⁻¹
    Show answer

    Answer: A. H = nI = 1200 × 0.5 = 600 A m⁻¹. It does not depend on what core is inside.

  2. 2. A material has susceptibility χ = 299. What is its relative permeability?

    1. 299
    2. 298
    3. 300
    4. 1/299
    Show answer

    Answer: C. μr = 1 + χ = 1 + 299 = 300.

  3. 3. In a magnetic intensity of 400 A m⁻¹, a material has magnetisation 1.2 × 10⁵ A m⁻¹. What is its susceptibility?

    1. 4.8 × 10⁷
    2. 3.3 × 10⁻³
    3. 301
    4. 300
    Show answer

    Answer: D. χ = M/H = 1.2 × 10⁵ ÷ 400 = 300.

  4. 4. A solenoid with H = 1500 A m⁻¹ inside is filled with a core of μr = 400. What is B? (μ₀ = 4π × 10⁻⁷ T m A⁻¹)

    1. 0.19 T
    2. 0.75 T
    3. 1.9 × 10⁻³ T
    4. 0.6 T
    Show answer

    Answer: B. B = μrμ₀H = 400 × 4π × 10⁻⁷ × 1500 = 4π × 10⁻⁷ × 6 × 10⁵ ≈ 0.75 T.

  5. 5. Assertion (A): For a diamagnetic material the magnetisation M points opposite to the magnetic intensity H. Reason (R): Diamagnetic materials have a small negative magnetic susceptibility.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. M = χH with χ < 0, so M is antiparallel to H. R explains A.

Privacy · Terms · Refunds · Delivery