Revision notes

Chapter 10 Wave Optics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The wave model of light: wavefronts and Huygens principle

Corpuscular model versus wave model

  • Corpuscular model
    • Light is a stream of particles
    • Explains reflection and refraction
    • Predicts light is faster in a denser medium
    • Cannot explain interference or diffraction
  • Wave model
    • Light is a wave (electromagnetic, per Maxwell)
    • Explains reflection and refraction
    • Predicts light is slower in a denser medium, as found by experiment
    • Explains interference, diffraction and polarisation

Huygens construction step by step

  1. Known wavefront at t = 0 Mark points along it.
  2. Secondary wavelets Each point emits a wavelet travelling at speed v.
  3. Draw spheres of radius vτ One from each point, after time τ.
  4. Forward common tangent This envelope is the wavefront at time τ.

Wavefront: a surface of constant phase. Rays are perpendicular to wavefronts. Huygens principle: every point of a wavefront is a source of secondary wavelets; their forward envelope is the new wavefront.

  • The wave model correctly predicts that light is slower in a denser medium.
  • Light is an electromagnetic wave and needs no medium.
  • Point sources give spherical wavefronts; distant sources give plane wavefronts.
  • Huygens construction finds new wavefronts from the forward envelope of secondary wavelets.
Read the full lesson

Lesson 2

Reflection and refraction of plane waves using Huygens principle

What changes when light is refracted or reflected
QuantityOn entering a denser mediumOn reflection
Frequency νUnchangedUnchanged
Speed vDecreases: v = c/nUnchanged
Wavelength λDecreases: λ = λ₀/nUnchanged

Deriving a law with Huygens construction

  1. Draw the incident wavefront One end touches the surface at A.
  2. Let the far end travel to the surface Distance v₁τ in time τ.
  3. Grow a wavelet from A Radius vτ (reflection) or v₂τ (refraction).
  4. Draw the tangent from the far end This is the new wavefront.
  5. Compare the two right triangles Equal angles give reflection; sin i/sin r = v₁/v₂ gives refraction.

From Huygens construction: sin i / sin r = v₁/v₂ = λ₁/λ₂ = n₂/n₁. Frequency does not change on reflection or refraction.

  • Huygens construction gives both laws: i = r for reflection and n₁ sin i = n₂ sin r for refraction.
  • Bending towards the normal means the wave is slower in the second medium.
  • On refraction, v and λ change in the same ratio; ν stays fixed.
  • Total internal reflection happens when no tangent can be drawn to the faster wavelet.
Read the full lesson

Lesson 3

Superposition: coherent and incoherent addition of waves

Phase difference φ = (2π/λ) × path difference. Path difference nλ → phase 2nπ; path difference (n + ½)λ → phase (2n + 1)π.

Two equal coherent waves, each of intensity I₀
Path differencePhase difference φIntensity I = 4I₀ cos²(φ/2)Type
0, λ, 2λ, … (nλ)0, 2π, 4π, …4I₀ (maximum)Constructive
λ/2, 3λ/2, … ((n + ½)λ)π, 3π, …0 (minimum)Destructive
λ/4π/22I₀Partial
λ/32π/3I₀Partial

Coherent and incoherent addition

  • Coherent sources
    • Constant phase difference at each point
    • Intensity 4I₀ cos²(φ/2): varies from 0 to 4I₀
    • Steady pattern of bright and dark fringes
    • Obtained by dividing light from one source
  • Incoherent sources
    • Phase difference changes randomly
    • Average intensity 2I₀ everywhere
    • No visible pattern: intensities just add
    • Two independent lamps
  • Superposition adds displacements, not intensities.
  • φ = (2π/λ) × path difference.
  • Equal coherent waves: I = 4I₀ cos²(φ/2); maxima at nλ, zeros at (n + ½)λ.
  • Incoherent sources give 2I₀ everywhere; coherence needs a single original source.
Read the full lesson

Lesson 4

Young's double-slit experiment and fringe width

Young's double-slit arrangement

  1. Bright source Monochromatic light, e.g. a sodium lamp.
  2. Single slit S Acts as one narrow source.
  3. Double slit S₁, S₂ Separation d, equidistant from S: two coherent sources.
  4. Overlap of the two waves Path differences vary from point to point.
  5. Screen at distance D Equally spaced bright and dark fringes.

Path difference = xd/D. Bright: x = nλD/d. Dark: x = (n + ½)λD/d. Fringe width β = λD/d.

Predicting changes in the fringe pattern
Change madeEffect on fringe width β = λD/d
Screen moved further away (D increases)β increases in proportion
Slits moved closer together (d decreases)β increases
Red light replaced by blue light (λ decreases)β decreases: blue fringes are narrower
Whole apparatus placed in water (n = 4/3)λ becomes λ/n, so β becomes β/n = 3β/4
White light usedCentral fringe white; other fringes coloured, then the pattern blurs out
  • Young obtained coherent sources by dividing light from one slit.
  • Path difference at height x on the screen is xd/D.
  • Bright and dark fringes are equally spaced with fringe width β = λD/d.
  • The central fringe is always bright; in a medium β shrinks by the factor n.
Read the full lesson

Lesson 5

Diffraction at a single slit and polarisation of light

Single slit of width a: minima at θ ≈ nλ/a (n = ±1, ±2, …); secondary maxima at θ ≈ (n + ½)λ/a; central maximum angular width 2λ/a, linear width 2λD/a on a screen at distance D.

Interference and diffraction

  • Young's double-slit interference
    • Superposition of waves from two coherent slits
    • Fringes of equal width
    • All bright fringes of nearly equal intensity
    • Central bright fringe same width as the others
  • Single-slit diffraction
    • Superposition of wavelets from all points of one slit
    • Central maximum twice as wide as the others
    • Secondary maxima much weaker, fading outwards
    • Narrower slit gives a wider pattern

Unpolarised light through two polaroids

  1. Unpolarised light, intensity I Electric field in all transverse directions.
  2. Polaroid P₁ Passes only the component along its pass-axis: intensity I/2, linearly polarised.
  3. Polaroid P₂ at angle θ to P₁ Passes the component E cos θ.
  4. Emerging light Intensity (I/2) cos²θ: maximum at 0°, zero at 90°.

Malus' law: I = I₀ cos²θ, where θ is the angle between the pass-axes. A single polaroid transmits half of unpolarised light.

  • Single slit: central maximum at θ = 0, minima at θ = nλ/a, weak secondary maxima in between.
  • Narrower slit or longer wavelength gives a wider pattern.
  • Polarisation proves light is transverse; a polaroid passes half of unpolarised light.
  • Malus' law: I = I₀ cos²θ.
Read the full lesson

Privacy · Terms · Refunds · Delivery