• Foundation
  • About 26 min
  • 5 practice questions

Young's double-slit experiment and fringe width

Explain how Young obtained coherent sources, derive the positions of bright and dark fringes and the fringe width β = λD/d, and predict how the pattern changes with wavelength, distances and the medium.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how Young's arrangement produces two coherent sources.
  • Derive the path difference xd/D at a point on the screen.
  • Derive positions of bright and dark fringes and the fringe width β = λD/d.
  • Solve numericals and predict changes to the fringe pattern.

In 1801 Thomas Young showed that light passed through two close pinholes produces alternate bright and dark bands. This was firm evidence that light is a wave, and the measurement gave the first values of the tiny wavelength of light. The same experiment is still the standard way to measure wavelength in a school laboratory.

Making coherent sources

Two separate lamps are incoherent. Young's trick was to light a single pinhole S with a bright source, and let the light from S fall on two pinholes (or slits) S₁ and S₂ very close together. Any sudden phase change at S reaches S₁ and S₂ together, so the light from S₁ and S₂ stays locked in phase. S₁ and S₂ act like the two needles moving together in a water tray: two coherent sources. Their overlapping waves produce fringes on a screen GG′ a distance D away.

Young's double-slit arrangement

  1. Bright source Monochromatic light, e.g. a sodium lamp.
  2. Single slit S Acts as one narrow source.
  3. Double slit S₁, S₂ Separation d, equidistant from S: two coherent sources.
  4. Overlap of the two waves Path differences vary from point to point.
  5. Screen at distance D Equally spaced bright and dark fringes.

Path difference at a point on the screen

Let O on the screen be directly opposite the midpoint of S₁S₂, and P a point at height x above O. Usually D is very much larger than both d and x.

  1. S₁ sits at height d/2 above the axis and S₂ at d/2 below it. By Pythagoras: (S₂P)² = D² + (x + d/2)² and (S₁P)² = D² + (x − d/2)².
  2. Subtract: (S₂P)² − (S₁P)² = (x + d/2)² − (x − d/2)² = 2xd.
  3. Factorise: (S₂P − S₁P)(S₂P + S₁P) = 2xd.
  4. Since D ≫ x and d, S₂P + S₁P ≈ 2D.
  5. So the path difference is S₂P − S₁P ≈ xd/D.

Bright and dark fringes

Bright fringe (constructive): xd/D = nλ, so xₙ = nλD/d, with n = 0, ±1, ±2, … The central point O (n = 0, zero path difference) is always bright. Dark fringe (destructive): xd/D = (n + ½)λ, so xₙ = (n + ½)λD/d.

The distance between two neighbouring bright fringes is xₙ₊₁ − xₙ = λD/d, and the distance between neighbouring dark fringes is the same. So the fringes are equally spaced, and this spacing is the fringe width β. A dark fringe lies midway between two bright ones.

Path difference = xd/D. Bright: x = nλD/d. Dark: x = (n + ½)λD/d. Fringe width β = λD/d.

Predicting changes in the fringe pattern
Change madeEffect on fringe width β = λD/d
Screen moved further away (D increases)β increases in proportion
Slits moved closer together (d decreases)β increases
Red light replaced by blue light (λ decreases)β decreases: blue fringes are narrower
Whole apparatus placed in water (n = 4/3)λ becomes λ/n, so β becomes β/n = 3β/4
White light usedCentral fringe white; other fringes coloured, then the pattern blurs out

With white light each colour makes its own pattern. All colours have zero path difference at O, so the central fringe is white. On either side the patterns separate: the first fringes show colour edges (blue nearer the centre, because its β is smaller), and after a few fringes the colours overlap so much that the screen looks uniformly lit.

Worked example 1: fringe width and fringe positions

Slits 0.50 mm apart are lit with light of wavelength 600 nm; the screen is 1.0 m away. Fringe width: β = λD/d = (600 × 10⁻⁹ × 1.0)/(0.50 × 10⁻³) = 1.2 × 10⁻³ m = 1.2 mm. Third bright fringe: x₃ = 3β = 3.6 mm from the centre. Second dark fringe (n = 1): x = 1.5β = 1.8 mm.

Worked example 2: finding the wavelength

Slits 0.30 mm apart, screen 1.5 m away; the distance from the central bright fringe to the fifth bright fringe is 1.5 cm. Fringe width: β = 1.5 cm ÷ 5 = 0.30 cm = 3.0 × 10⁻³ m. Wavelength: λ = βd/D = (3.0 × 10⁻³ × 0.30 × 10⁻³)/1.5 = 6.0 × 10⁻⁷ m = 600 nm.

Worked example 3: apparatus in water

If the arrangement of Worked example 1 is placed in water (n = 4/3), the wavelength becomes 600/(4/3) = 450 nm, so β = 1.2 mm × 3/4 = 0.90 mm.

Worked example 4: two wavelengths together

The same slits (d = 0.50 mm, D = 1.0 m) are lit by light containing 600 nm and 480 nm. Where do bright fringes of both first coincide (apart from the centre)? We need n₁ × 600 = n₂ × 480 with the smallest whole numbers: 4 × 600 = 5 × 480 = 2400 nm. So the 4th bright fringe of 600 nm meets the 5th of 480 nm at x = 4 × 1.2 mm = 4.8 mm.

Key takeaways

  • Young obtained coherent sources by dividing light from one slit.
  • Path difference at height x on the screen is xd/D.
  • Bright and dark fringes are equally spaced with fringe width β = λD/d.
  • The central fringe is always bright; in a medium β shrinks by the factor n.

Check your understanding

  1. 1. In a double-slit experiment, d = 1.0 mm, D = 1.0 m and λ = 500 nm. The fringe width is

    1. 0.50 mm
    2. 5.0 mm
    3. 0.050 mm
    4. 1.0 mm
    Show answer

    Answer: A. β = λD/d = (500 × 10⁻⁹ × 1.0)/(1.0 × 10⁻³) = 5.0 × 10⁻⁴ m = 0.50 mm.

  2. 2. If the distance between the slits is doubled and the distance to the screen is also doubled, the fringe width

    1. doubles
    2. halves
    3. becomes four times
    4. remains the same
    Show answer

    Answer: D. β = λD/d. Doubling both D and d multiplies β by 2/2 = 1, so the fringe width stays the same.

  3. 3. In Young's experiment the slits are 0.25 mm apart and the screen is 1.25 m away. The fourth bright fringe is 1.2 cm from the centre. The wavelength used is

    1. 480 nm
    2. 800 nm
    3. 600 nm
    4. 420 nm
    Show answer

    Answer: C. x₄ = 4λD/d, so λ = x₄d/(4D) = (1.2 × 10⁻² × 0.25 × 10⁻³)/(4 × 1.25) = (3.0 × 10⁻⁶)/5.0 = 6.0 × 10⁻⁷ m = 600 nm.

  4. 4. Why is the central fringe in Young's experiment always bright, even with white light?

    1. Because the slits are closest to it
    2. Because light is brightest along the axis
    3. Because the path difference there is zero for every wavelength
    4. Because diffraction is absent there
    Show answer

    Answer: C. At the central point the distances from S₁ and S₂ are equal, so the path difference is zero for all wavelengths. Every colour interferes constructively there, giving a bright (white) central fringe.

  5. 5. Assertion (A): When a Young's double-slit apparatus is immersed in water, the fringes become narrower. Reason (R): The wavelength of light in water is smaller than in air, and β = λD/d.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. In water λ becomes λ/n with n ≈ 1.33, so β = λD/d falls by the same factor. The fringes become narrower precisely because of the shorter wavelength, so R explains A.

Privacy · Terms · Refunds · Delivery