- Foundation
- About 24 min
- 5 practice questions
Binding energy curve, nuclear force and radioactivity
Interpret the binding energy per nucleon curve, explain the properties of the nuclear force including saturation, and describe alpha, beta and gamma decay.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the main features of the binding energy per nucleon curve.
- Explain the flat middle of the curve using the short range (saturation) of the nuclear force.
- State the properties of the nuclear force.
- Describe the three types of radioactive decay.
Plotting binding energy per nucleon against mass number for all known nuclei gives one of the most important graphs in physics. Its shape explains why nuclei are stable, why the Sun shines and why nuclear reactors work.
Data used in this course: 1 u = 1.6605 × 10⁻²⁷ kg = 931.5 MeV/c², c = 3 × 10⁸ m s⁻¹, 1 MeV = 1.6 × 10⁻¹³ J, mass of hydrogen atom m(¹H) = 1.007825 u, neutron mass mₙ = 1.008665 u, proton mass mₚ = 1.00727 u, electron mass mₑ = 0.00055 u, R₀ = 1.2 fm (1 fm = 10⁻¹⁵ m), Avogadro number Nₐ = 6.022 × 10²³ mol⁻¹.
Features of the curve
- For middle-mass nuclei (30 < A < 170), E_bn is nearly constant at about 8 MeV.
- The curve has a maximum of about 8.75 MeV near A = 56 (iron): these are the most tightly bound nuclei.
- E_bn is lower for light nuclei (A < 30) and for heavy nuclei (A > 170); for A = 238 it is about 7.6 MeV.
- Small peaks appear at nuclides such as ⁴He and ¹⁶O, taken as evidence of shell structure inside nuclei.
What the curve tells us
- The force between nucleons is attractive and strong enough to bind each nucleon by a few MeV, a million times atomic binding energies (eV).
- The flat middle shows the force is short-ranged. A nucleon deep inside a large nucleus feels only its nearby neighbours within range, say p of them. Adding more nucleons elsewhere does not change its binding, so E_bn stays about the same. This is the saturation property of the nuclear force.
- A very heavy nucleus (A ≈ 240) has lower E_bn than nuclei of A ≈ 120. If it splits into two such nuclei, nucleons become more tightly bound and energy is released: fission.
- Very light nuclei (A ≤ 10) have low E_bn. If two join into a heavier nucleus, E_bn increases and energy is released: fusion.
Binding energy per nucleon and nuclear energy
-
Light nuclei (A < 30)
- Low E_bn
- Gain energy by fusing into heavier nuclei
- Fusion powers the Sun and stars
-
Middle nuclei (30 < A < 170)
- E_bn about 8 MeV
- Peak about 8.75 MeV near A = 56
- Most stable; neither fission nor fusion releases energy
-
Heavy nuclei (A > 170)
- E_bn falls to about 7.6 MeV at A = 238
- Gain energy by splitting (fission)
- Fission powers nuclear reactors
Worked example 1: estimating fission energy from the curve
A nucleus with A = 236 (E_bn ≈ 7.6 MeV) splits into two fragments of A ≈ 118 each (E_bn ≈ 8.5 MeV). Gain in binding energy per nucleon ≈ 8.5 − 7.6 = 0.9 MeV. Total energy released ≈ 236 × 0.9 ≈ 212 MeV, about 200 MeV per fission.
The nuclear force
Binding energies of about 8 MeV per nucleon are far larger than atomic binding energies, so the force holding a nucleus together must be a new, much stronger force. Experiments between 1930 and 1950 established its main features:
- It is much stronger than the Coulomb force (and far stronger than gravity); it must overcome the repulsion between protons packed into a tiny volume.
- It is short-ranged: it falls rapidly to zero beyond a few femtometres. This gives saturation and the flat binding energy curve.
- It is attractive at separations above about 0.8 fm and strongly repulsive below about 0.8 fm, so nucleons cannot be squeezed together indefinitely. The potential energy of a pair is lowest at about 0.8 fm.
- It is charge-independent: the n–n, p–p and n–p nuclear forces are about the same.
- Unlike Coulomb's law or Newton's law of gravitation, it has no simple mathematical form.
Nuclear force and Coulomb force
-
Nuclear force
- Very strong
- Short range: a few fm
- Attractive above about 0.8 fm, repulsive below
- Same for protons and neutrons
-
Coulomb force
- Much weaker at nuclear distances
- Long range: falls as 1/r²
- Repulsive between protons
- Acts only on charges
Stability and radioactivity
Light stable nuclei have about equal numbers of neutrons and protons (N : Z ≈ 1 : 1). Heavy stable nuclei need more neutrons, up to about 3 : 2, because the extra neutrons add nuclear attraction without adding proton repulsion. Nuclei with too many neutrons or too many protons are unstable; only about 10% of known isotopes are stable.
Unstable nuclei transform spontaneously: radioactivity. A. H. Becquerel discovered it by accident in 1896, when a uranium compound wrapped in black paper blackened a photographic plate even through a sheet of silver. Radioactive decay is a nuclear process, and three types occur in nature:
| Decay | What is emitted | Effect on the nucleus |
|---|---|---|
| Alpha (α) decay | A helium nucleus ⁴₂He | Z falls by 2, A falls by 4 |
| Beta (β) decay | An electron (β⁻) or a positron (β⁺), a particle of electron mass with opposite charge | Z changes by 1, A unchanged |
| Gamma (γ) decay | High-energy photons (hundreds of keV or more) | Z and A unchanged; the nucleus loses energy |
Worked example 2: reading the stability rule
Compare ¹⁶₈O (N = 8, Z = 8, ratio 1 : 1) and ²⁰⁸₈₂Pb (N = 126, Z = 82, ratio about 1.54 : 1, close to 3 : 2). Both are stable: the light nucleus needs equal numbers, the heavy one needs extra neutrons to offset the larger repulsion among its 82 protons.
Key takeaways
- E_bn ≈ 8 MeV for 30 < A < 170, peaking near A = 56; lower for light and heavy nuclei.
- The flat region comes from the short range (saturation) of the nuclear force.
- Nuclear force: very strong, short-range, charge-independent, repulsive below about 0.8 fm.
- Radioactive nuclei emit α particles, β particles or γ rays.
Check your understanding
-
1. The binding energy per nucleon is greatest for nuclei with mass number near
- 4
- 238
- 120
- 56
Show answer
Answer: D. The curve peaks at about 8.75 MeV near A = 56 (iron), so these nuclei are the most tightly bound.
-
2. The nearly constant binding energy per nucleon for 30 < A < 170 is explained by
- the long range of the nuclear force
- the short range (saturation) of the nuclear force
- the Coulomb repulsion between protons
- the gravitational attraction between nucleons
Show answer
Answer: B. Each nucleon interacts only with nearby neighbours within the short range of the nuclear force, so adding more nucleons does not change how strongly an inside nucleon is bound.
-
3. The nuclear force between two nucleons separated by less than about 0.8 fm is
- the same as the Coulomb force
- strongly attractive
- zero
- strongly repulsive
Show answer
Answer: D. The potential energy of a nucleon pair is lowest at about 0.8 fm. Closer than that the force becomes strongly repulsive, which keeps nucleons from collapsing together.
-
4. In gamma decay of a nucleus,
- Z falls by 2 and A by 4
- Z increases by 1
- Z and A do not change
- A falls by 1
Show answer
Answer: C. Gamma decay emits a high-energy photon, which has no charge and no mass number. The nucleus only drops to a lower energy state; Z and A stay the same.
-
5. Assertion (A): Energy is released when a very heavy nucleus splits into two middle-mass nuclei. Reason (R): Middle-mass nuclei have a greater binding energy per nucleon than very heavy nuclei.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. For A ≈ 240, E_bn ≈ 7.6 MeV, while for A ≈ 120 it is about 8.5 MeV. Splitting makes the nucleons more tightly bound, and the extra binding energy is released. R explains A.
Sign in to keep track of the lessons you finish.