- Foundation
- About 26 min
- 5 practice questions
Nuclear energy: fission and fusion
Compare nuclear and chemical energy, write fission and fusion reactions, calculate Q values from masses, and explain why fusion needs very high temperatures and powers the Sun.
If something looks wrong, please tell us.
By the end of this lesson you can
- Compare the energy from nuclear and chemical reactions.
- Describe neutron-induced fission of uranium-235 and estimate its energy.
- Define and calculate the Q value of a nuclear reaction.
- Explain thermonuclear fusion, the proton-proton cycle in the Sun and the challenge of controlled fusion.
Whenever nuclei with less total binding energy turn into nuclei with more, energy is released. That happens when a heavy nucleus splits (fission) or when light nuclei fuse (fusion). Because nuclear energies are in MeV while chemical energies are in eV, nuclear sources give about a million times more energy from the same amount of fuel: fission of 1 kg of uranium gives about 10¹⁴ J, while burning 1 kg of coal gives about 10⁷ J.
Data used in this course: 1 u = 1.6605 × 10⁻²⁷ kg = 931.5 MeV/c², c = 3 × 10⁸ m s⁻¹, 1 MeV = 1.6 × 10⁻¹³ J, mass of hydrogen atom m(¹H) = 1.007825 u, neutron mass mₙ = 1.008665 u, proton mass mₚ = 1.00727 u, electron mass mₑ = 0.00055 u, R₀ = 1.2 fm (1 fm = 10⁻¹⁵ m), Avogadro number Nₐ = 6.022 × 10²³ mol⁻¹.
The Q value
In a nuclear reaction the numbers of protons and of neutrons are each conserved (so equations balance in A and Z, though elements change). The Q value is the energy released:
Q = (sum of initial masses − sum of final masses) × c² = final kinetic energy − initial kinetic energy. Q > 0: energy released (exothermic). Q < 0: energy must be supplied (endothermic).
Because proton and neutron numbers are conserved, the mass that 'disappears' is really the difference in binding energies of the nuclei on the two sides. Chemical reactions also convert a tiny amount of mass, from differences in chemical binding energy, but those mass changes are about a million times smaller, which is why we usually ignore them.
Fission
When uranium-235 absorbs a slow neutron it forms uranium-236, which splits into two middle-mass fragments and a few neutrons. Several pairs of fragments are possible, for example:
- ¹₀n + ²³⁵₉₂U → ²³⁶₉₂U → ¹⁴⁴₅₆Ba + ⁸⁹₃₆Kr + 3 ¹₀n
- ¹₀n + ²³⁵₉₂U → ²³⁶₉₂U → ¹³³₅₁Sb + ⁹⁹₄₁Nb + 4 ¹₀n
- ¹₀n + ²³⁵₉₂U → ¹⁴⁰₅₄Xe + ⁹⁴₃₈Sr + 2 ¹₀n
Check the first: A: 1 + 235 = 144 + 89 + 3 = 236; Z: 92 = 56 + 36. The fragments are radioactive and reach stability through a series of beta decays. About 200 MeV is released per fission, first as kinetic energy of the fragments and neutrons, then as heat in the surroundings. Nuclear reactors use controlled fission to make electricity; an atom bomb releases fission energy without control.
Worked example 1: energy from 1 g of uranium-235
Number of nuclei in 1 g: N = (1/235) × 6.022 × 10²³ ≈ 2.56 × 10²¹. Energy at 200 MeV each: E = 2.56 × 10²¹ × 200 MeV = 5.12 × 10²³ MeV = 5.12 × 10²³ × 1.6 × 10⁻¹³ J ≈ 8.2 × 10¹⁰ J. One gram of uranium can supply as much energy as several tonnes of coal.
Fusion
When two light nuclei join, the product is more tightly bound and energy is released. Examples:
- ¹₁H + ¹₁H → ²₁H + e⁺ + ν + 0.42 MeV (two protons form a deuteron, a positron and a neutrino)
- ²₁H + ²₁H → ³₂He + n + 3.27 MeV
- ²₁H + ²₁H → ³₁H + ¹₁H + 4.03 MeV
Worked example 2: Q value of a deuterium reaction
For ²₁H + ²₁H → ³₂He + ¹₀n, with m(²H) = 2.014102 u, m(³He) = 3.016029 u and mₙ = 1.008665 u: initial mass = 2 × 2.014102 = 4.028204 u; final mass = 3.016029 + 1.008665 = 4.024694 u. Mass lost = 0.003510 u. Q = 0.003510 × 931.5 ≈ 3.27 MeV, as quoted above. Q > 0, so energy is released.
Why fusion needs extreme temperatures
To fuse, two nuclei must come close enough for the short-range nuclear force to act, but both are positive and repel. They need enough kinetic energy to climb this Coulomb barrier, about 400 keV for two protons and higher for more highly charged nuclei. Setting the average thermal energy (3/2)kT ≈ 400 keV gives T ≈ 3 × 10⁹ K. Fusion produced by heating is called thermonuclear fusion. The core of the Sun is at about 1.5 × 10⁷ K, far lower, so fusion there relies on the small fraction of protons with energies well above the average.
Energy of the Sun
The proton-proton cycle in the Sun
- Two protons fuse ¹H + ¹H → ²H + e⁺ + ν + 0.42 MeV.
- Positron annihilates an electron e⁺ + e⁻ → γ + γ + 1.02 MeV.
- Deuteron captures a proton ²H + ¹H → ³He + γ + 5.49 MeV.
- Two helium-3 nuclei fuse ³He + ³He → ⁴He + ¹H + ¹H + 12.86 MeV (the first three steps happen twice).
- Net result Four hydrogen atoms become one helium atom, releasing 26.7 MeV.
Check the net energy: 2 × 0.42 + 2 × 1.02 + 2 × 5.49 + 12.86 = 0.84 + 2.04 + 10.98 + 12.86 = 26.72 ≈ 26.7 MeV. The Sun's fuel is the hydrogen in its core. When that is used up, the core contracts and heats; at about 10⁸ K helium fuses into carbon, and stars can build heavier elements this way, but not beyond the peak of the binding energy curve near iron.
Worked example 3: per nucleon, fission versus fusion
Fission of uranium-235: about 200 MeV shared over about 236 nucleons ≈ 0.85 MeV per nucleon. The p-p cycle: 26.7 MeV for 4 nucleons ≈ 6.7 MeV per nucleon. Per kilogram of fuel, fusion releases several times more energy than fission.
Controlled thermonuclear fusion
Fusion reactors aim to heat fuel to around 10⁸ K, where it becomes a plasma of positive ions and electrons. No material container can hold matter at such temperatures, so the plasma must be confined by other means. Several countries, including India, are developing these techniques; success would provide an almost unlimited source of power.
Key takeaways
- Nuclear reactions release about a million times more energy per kilogram than chemical ones.
- Q = (initial mass − final mass)c²; positive Q means energy released.
- Fission of U-235 gives about 200 MeV per nucleus.
- Fusion needs enough energy to overcome the Coulomb barrier; four protons → one helium releases 26.7 MeV in the Sun.
Check your understanding
-
1. The energy released per fission of a uranium-235 nucleus is of the order of
- 200 eV
- 2 MeV
- 200 MeV
- 2000 MeV
Show answer
Answer: C. Using the binding energy curve: about 236 nucleons each gain about 0.9 MeV of binding energy, giving roughly 200 MeV per fission.
-
2. In the reaction ¹₀n + ²³⁵₉₂U → ¹⁴¹₅₆Ba + ˣ₃₆Kr + 3 ¹₀n, the mass number x of krypton is
- 92
- 89
- 95
- 94
Show answer
Answer: A. Mass numbers balance: 1 + 235 = 141 + x + 3, so x = 236 − 144 = 92. (Charge: 92 = 56 + 36 also balances.)
-
3. Fusion of light nuclei requires very high temperatures because
- the nuclear force is long-ranged
- the nuclei must be ionised
- the positively charged nuclei must overcome their Coulomb repulsion to come within range of the nuclear force
- high temperature increases the mass of the nuclei
Show answer
Answer: C. The nuclear force acts only at a few fm, but the nuclei repel electrically. Only nuclei with large kinetic energy, as found at very high temperature, can get close enough to fuse.
-
4. For ²₁H + ³₁H → ⁴₂He + ¹₀n, the masses are 2.014102 u, 3.016049 u, 4.002603 u and 1.008665 u. The Q value is about
- 3.27 MeV
- 17.6 MeV
- 26.7 MeV
- 0.019 MeV
Show answer
Answer: B. Initial mass = 2.014102 + 3.016049 = 5.030151 u. Final mass = 4.002603 + 1.008665 = 5.011268 u. Mass lost = 0.018883 u. Q = 0.018883 × 931.5 ≈ 17.6 MeV.
-
5. Assertion (A): Elements heavier than iron cannot be produced in a star by fusion that releases energy. Reason (R): Nuclei near iron have the highest binding energy per nucleon, so fusing them into heavier nuclei would lower the binding energy per nucleon.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Fusion releases energy only while the product is more tightly bound per nucleon. Beyond the peak near A = 56, joining nuclei makes them less tightly bound, so energy would have to be supplied. R explains A.
Sign in to keep track of the lessons you finish.