Revision notes

Chapter 8 Playing with Constructions: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The compass, circles and artwork with arcs

A circle is the set of all points at the same distance (the radius) from a fixed point (the centre).

Drawing a circle of radius 4 cm

  1. Set the compass Place the metal tip on 0 of the ruler and open the compass until the pencil tip is at 4 cm.
  2. Fix the centre Press the metal tip firmly on the point P.
  3. Turn Rotate the compass by its top, keeping the tip fixed and the opening unchanged.
  4. Check Pick a few points on the circle and measure: each should be 4 cm from P.

Planning a compass drawing

  • Identify the parts
    • Straight segments
    • Full circles
    • Arcs and half circles
  • For each arc
    • Where is its centre?
    • What radius reaches its ends?
  • Helper lines
    • Light lines or points that guide the drawing
    • Rub them out at the end

Key takeaways: a circle is all the points at one fixed distance (the radius) from the centre. A compass draws circles and arcs and copies lengths. To draw arcs in artwork, decide each arc's centre and radius first; a half circle's radius is half the length it stands on.

Read the full lesson

Lesson 2

Squares and rectangles: properties, names and rotations

Rectangle and square

  • Rectangle
    • R1: opposite sides are equal in length
    • R2: all four angles are 90°
  • Square
    • S1: all four sides are equal
    • S2: all four angles are 90°

Is this shape a square?

  1. Measure all four sides Are they all equal? If not, it is not a square.
  2. Measure the angles Are all four 90°? If not, it is not a square.
  3. Decide Both yes: square. Equal opposite sides and right angles only: rectangle.

Rectangle: opposite sides equal and all angles 90°. Square: all sides equal and all angles 90°. Rotating a shape does not change its sides or angles.

Key takeaways: a rectangle needs equal opposite sides and four right angles; a square needs four equal sides and four right angles. Name a shape by going round its corners in order. Tilting a square or rectangle does not stop it being one; checking sides and angles decides.

Read the full lesson

Lesson 3

Constructing squares and rectangles

Square PQRS with side 6 cm

  1. Draw PQ = 6 cm Use a ruler.
  2. Right angle at P Draw a line through P perpendicular to PQ, using the 90° mark of a protractor.
  3. Mark S On that line mark S with PS = 6 cm (ruler or compass).
  4. Right angle at Q Draw a line through Q perpendicular to PQ.
  5. Mark R On it mark R with QR = 6 cm, then join R and S.
  6. Check RS should be 6 cm and ∠R and ∠S should be 90°.

Planning any construction

  • Rough figure
    • Sketch it and label the points
  • Mark what is known
    • Equal sides with small dashes
    • Right angles with a small square
  • Work out lengths
    • Use equal sides and differences to find missing lengths
  • Order of steps
    • Decide what can be drawn first and what follows from it

Plan before you construct: draw a rough figure, mark the equal sides and right angles, find the missing lengths, then decide the order of steps.

Key takeaways: to construct a square or rectangle, draw one side, raise perpendiculars at its ends, mark the other sides to length and join. A compass copies lengths exactly. A rough figure with equal sides marked turns a puzzle, such as a rectangle of identical squares, into simple arithmetic.

Read the full lesson

Lesson 4

Diagonals and distances inside rectangles

Recording an exploration
X from AY from BLength of XY (measured)What we notice
1 cm1 cm7 cmXY is parallel to AB, ABYX is a rectangle
2 cm2 cm7 cmSame again: equal distances give XY = AB
0 cm (X = A)4 cm (Y = C)About 8 cmThis is the diagonal AC
4 cm (X = D)0 cm (Y = B)About 8 cmThis is the other diagonal, DB

How a diagonal splits the corner angles

  • Rectangle (not a square)
    • The two parts are unequal
    • For example 60° and 30°
    • They always add to 90°
  • Square
    • The two parts are equal
    • 45° and 45°
    • The diagonal bisects the corner angles

The diagonals of a rectangle are equal. A diagonal splits each right-angled corner it passes through into two angles that add up to 90°; the parts are equal (45° each) only in a square.

Rectangle with ∠BAC = 70°

  1. Draw AB Any convenient length, say 3 cm.
  2. Perpendicular at B C must lie on this line, since ∠B = 90°.
  3. Angle of 70° at A Draw a ray from A making 70° with AB; where it meets the perpendicular is C.
  4. Find D Draw a perpendicular at A and one at C (or mark AD = BC with a compass); they meet at D.
  5. Check ∠CAD should measure 90° − 70° = 20°.

Key takeaways: in a rectangle, the shortest segment joining two opposite sides runs straight across and equals the other pair of sides, and the longest is a diagonal. The two diagonals are equal. A diagonal splits a corner into two angles that add to 90°, equal only in a square. Exploring by constructing, measuring and recording leads to these discoveries.

Read the full lesson

Lesson 5

Using circles to find points: side-and-diagonal rectangles and the house

Rectangle with DC = 6 cm and diagonal DB = 10 cm

  1. Draw DC = 6 cm The base.
  2. Perpendicular at C Call it line l; B lies on l.
  3. Arc from D With radius 10 cm and centre D, draw an arc crossing l. The crossing point is B.
  4. Find A Draw perpendiculars at D (to DC) and at B (to BC); they meet at A.
  5. Check Measure: BC comes out about 8 cm, AD should equal BC, and both diagonals should be 10 cm.

To find a point at a known distance from a point P, draw a circle (or arc) of that radius around P: the point lies somewhere on it. Where it meets another line or arc gives the exact point.

Finding a point with a compass

  • One distance condition
    • Draw a circle or arc around the given point
  • Two distance conditions
    • Draw an arc around each point
    • The point is where they cross
  • Distance plus a line
    • Draw an arc
    • The point is where it meets the line
  • No crossing
    • The conditions cannot both be met
    • No such point exists

Key takeaways: a circle is the collection of all points at a fixed distance from its centre, so drawing one replaces trial and error. A rectangle can be built from a side and a diagonal by crossing an arc with a perpendicular. Points equidistant from two given points are found where two equal arcs cross, which builds roofs, rhombuses and many designs.

Read the full lesson

Privacy · Terms · Refunds · Delivery