• Foundation
  • About 13 min
  • 5 practice questions

The compass, circles and artwork with arcs

Use a compass to draw circles and arcs, explain the centre and radius of a circle, and plan simple artwork made of half circles and arcs.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why all points at a fixed distance from a point form a circle.
  • Set a compass to a given radius and draw circles, half circles and arcs.
  • Work out the radius and centres needed to draw a pattern of half circles on a line.

Freehand drawings are rarely neat. With two simple tools, a ruler and a compass, we can draw shapes accurately. Drawing figures carefully with such tools is called construction. In this chapter we play with constructions, starting with the compass.

Points at the same distance

Mark a point P. Now mark points that are exactly 4 cm from P, in many directions. As you mark more and more, they begin to trace a round curve. If you could mark all the points 4 cm from P, you would get a circle. P is the centre, and the fixed distance, 4 cm, is the radius.

A circle is the set of all points at the same distance (the radius) from a fixed point (the centre).

Using a compass

Drawing a circle of radius 4 cm

  1. Set the compass Place the metal tip on 0 of the ruler and open the compass until the pencil tip is at 4 cm.
  2. Fix the centre Press the metal tip firmly on the point P.
  3. Turn Rotate the compass by its top, keeping the tip fixed and the opening unchanged.
  4. Check Pick a few points on the circle and measure: each should be 4 cm from P.

Turning only part of the way gives an arc, a piece of a circle. Turning half way round gives a half circle. Because every point on an arc is the same distance from the compass tip, the compass is also a tool for copying a length: open it to the length of one segment and mark the same length elsewhere.

Worked example 1: a wave of half circles

Draw a line AB 12 cm long and build a wave of 3 equal half circles on it, alternately above and below the line. Each half circle stands on one third of AB, so its diameter (the width across) is 12 ÷ 3 = 4 cm and its radius is half of that: 2 cm. The centres are at the middle of each 4 cm piece: 2 cm, 6 cm and 10 cm from A. With the compass set to 2 cm, draw the first half circle above the line, the second below, and the third above.

Worked example 2: smaller waves

For a gentler wave, the arcs must be less than half circles. Then the centre is not on the line; it lies on the other side of the line, below an upward arc, and the radius must be more than half the width of each wave. For example, for waves 4 cm wide, put the centre below the line and use a radius of about 3 cm, adjusting by trial until the arc passes through both ends of the 4 cm piece. Each wave must use the same radius and the same distance from the line so that all waves are identical.

Artwork with arcs

Planning a compass drawing

  • Identify the parts
    • Straight segments
    • Full circles
    • Arcs and half circles
  • For each arc
    • Where is its centre?
    • What radius reaches its ends?
  • Helper lines
    • Light lines or points that guide the drawing
    • Rub them out at the end

Drawings such as a face, eyes or a flower need several arcs of the same size. Light helper lines that are not part of the final picture, such as a faint horizontal line through the centres, help place the compass tip in the right spots. A symmetrical eye, for example, can be drawn with one arc from a centre above it and an identical arc from a centre the same distance below it.

Worked example 3: a ring

To draw a ring 1 cm thick around a point O, draw a circle of radius 3 cm and another of radius 4 cm with the same centre O. Every point of the inner circle is 3 cm from O and every point of the outer circle 4 cm, so the gap between them is 4 − 3 = 1 cm all the way round.

Key takeaways: a circle is all the points at one fixed distance (the radius) from the centre. A compass draws circles and arcs and copies lengths. To draw arcs in artwork, decide each arc's centre and radius first; a half circle's radius is half the length it stands on.

Check your understanding

  1. 1. Every point on a circle is 5 cm from its centre O. What is 5 cm called?

    1. The diameter
    2. The radius
    3. The perimeter
    4. The arc
    Show answer

    Answer: B. The fixed distance from the centre to every point on the circle is the radius.

  2. 2. A point Q is 6 cm from the centre of a circle of radius 6 cm. Where is Q?

    1. Inside the circle
    2. Outside the circle
    3. On the circle
    4. At the centre
    Show answer

    Answer: C. Points exactly one radius (6 cm) from the centre lie on the circle itself.

  3. 3. A line 16 cm long carries a wave of 4 equal half circles standing on it. What radius should the compass be set to?

    1. 2 cm
    2. 4 cm
    3. 8 cm
    4. 16 cm
    Show answer

    Answer: A. Each half circle stands on 16 ÷ 4 = 4 cm of the line, which is its diameter. The radius is half of that: 4 ÷ 2 = 2 cm.

  4. 4. Why must the compass tip stay fixed while drawing a circle?

    1. To make the pencil sharper
    2. To change the radius as you draw
    3. So that the arc becomes a straight line
    4. So that every point drawn is the same distance from the centre
    Show answer

    Answer: D. The fixed tip is the centre. Keeping it and the opening fixed keeps every drawn point at the same distance, the radius.

  5. 5. Two circles with the same centre have radii 7 cm and 4 cm. How wide is the ring between them?

    1. 11 cm
    2. 3 cm
    3. 4 cm
    4. 7 cm
    Show answer

    Answer: B. Each point of the outer circle is 7 cm from the centre and each point of the inner circle 4 cm, so the gap is 7 − 4 = 3 cm all round.

Privacy · Terms · Refunds · Delivery