- Foundation
- About 15 min
- 5 practice questions
Using circles to find points: side-and-diagonal rectangles and the house
Locate a point at given distances from one or two points by drawing circles or arcs, construct a rectangle from a side and a diagonal, and construct figures such as a house outline and a rhombus.
If something looks wrong, please tell us.
By the end of this lesson you can
- Use a circle or arc to find a point at a fixed distance from a given point on a given line.
- Construct a rectangle when one side and a diagonal are given.
- Find points equidistant from two given points with two arcs, and construct a house outline and a rhombus.
Sometimes we know how far a point must be from another point, but not its direction. Searching with a ruler means trial and error. The smart idea: draw all the points at that distance, which is a circle, and see where it meets the other condition.
A rectangle from a side and a diagonal
Construct rectangle ABCD with side DC = 6 cm and diagonal DB = 10 cm. A rough figure shows that B lies on the perpendicular to DC at C, and B is 10 cm from D.
Rectangle with DC = 6 cm and diagonal DB = 10 cm
- Draw DC = 6 cm The base.
- Perpendicular at C Call it line l; B lies on l.
- Arc from D With radius 10 cm and centre D, draw an arc crossing l. The crossing point is B.
- Find A Draw perpendiculars at D (to DC) and at B (to BC); they meet at A.
- Check Measure: BC comes out about 8 cm, AD should equal BC, and both diagonals should be 10 cm.
Only the small part of the circle near line l is needed, so an arc is enough. Notice that the diagonal must be longer than the given side; if the diagonal were 5 cm with a side of 6 cm, the arc would never reach line l, and no such rectangle exists.
To find a point at a known distance from a point P, draw a circle (or arc) of that radius around P: the point lies somewhere on it. Where it meets another line or arc gives the exact point.
Points at the same distance from two points
Suppose B and C are 5 cm apart and we need a point A that is 5 cm from both. All points 5 cm from B form a circle around B; all points 5 cm from C form a circle around C. A must be on both circles, so it is where they cross. Two arcs are enough. The arcs actually cross at two points, one on each side of BC; either can be used.
Worked example 1: the house
A house outline has a square front BCDE of side 5 cm and a roof with top point A, where AB = AC = 5 cm. Construct the square first. Then, with the compass set to 5 cm, draw an arc from B and an arc from C above the square. Their crossing point is A. Join AB and AC. Since A is 5 cm from both B and C, a curved roof edge can also be drawn: an arc of radius 5 cm with centre A passes through both B and C.
Worked example 2: when arcs do not meet
Points B and C are 10 cm apart. Is there a point 4 cm from both? The arcs of radius 4 cm around B and C can reach at most 4 + 4 = 8 cm across, which is less than 10 cm, so they do not meet: no such point exists. With radius 6 cm, 6 + 6 = 12 cm is more than 10 cm, so the arcs cross at two points.
Worked example 3: four equal sides, but not a square
Draw AB = 5 cm and a second side AC = 5 cm making an angle of 60° at A (not 90°). Now find D that is 5 cm from both B and C, using two arcs of radius 5 cm. ABDC has four sides of 5 cm, but its angles are not 90°, so it is not a square. A four-sided figure with all sides equal is called a rhombus; a square is a rhombus whose angles are right angles.
Finding a point with a compass
-
One distance condition
- Draw a circle or arc around the given point
-
Two distance conditions
- Draw an arc around each point
- The point is where they cross
-
Distance plus a line
- Draw an arc
- The point is where it meets the line
-
No crossing
- The conditions cannot both be met
- No such point exists
Key takeaways: a circle is the collection of all points at a fixed distance from its centre, so drawing one replaces trial and error. A rectangle can be built from a side and a diagonal by crossing an arc with a perpendicular. Points equidistant from two given points are found where two equal arcs cross, which builds roofs, rhombuses and many designs.
Check your understanding
-
1. To construct a rectangle with side DC = 5 cm and diagonal DB = 7 cm, after drawing DC and a perpendicular at C, how is B found?
- Draw an arc of radius 5 cm from C
- Draw an arc of radius 7 cm from D to cut the perpendicular
- Measure 7 cm up from C
- Draw a 45° angle at D
Show answer
Answer: B. B must be on the perpendicular at C and 7 cm from D. An arc of radius 7 cm centred at D crosses the perpendicular at exactly that point.
-
2. Can a rectangle have a side of 8 cm and a diagonal of 6 cm?
- Yes, always
- Only if it is a square
- No, the diagonal must be longer than each side
- Yes, if the other side is 2 cm
Show answer
Answer: C. An arc of radius 6 cm from one end of the 8 cm side cannot reach the perpendicular at the other end, because the diagonal must be longer than the side. So no such rectangle exists.
-
3. B and C are 6 cm apart. Arcs of radius 5 cm are drawn from B and from C. How many points are 5 cm from both B and C?
- None
- One
- Four
- Two
Show answer
Answer: D. 5 + 5 = 10 cm is more than 6 cm, so the arcs cross, at one point on each side of BC: two points.
-
4. B and C are 12 cm apart. Is there a point that is 5 cm from both?
- No, because 5 + 5 = 10 is less than 12
- Yes, exactly one point
- Yes, two points
- Yes, the middle of BC
Show answer
Answer: A. Arcs of radius 5 cm from B and C reach at most 10 cm across together, which is less than 12 cm, so they never meet.
-
5. A four-sided figure has all sides 6 cm and one angle of 70°. What is it?
- A square
- A rhombus that is not a square
- A rectangle
- It cannot exist
Show answer
Answer: B. All sides are equal, so it is a rhombus. Its angle of 70° is not a right angle, so it is not a square (or a rectangle).
Sign in to keep track of the lessons you finish.