| Material | Lustrous? | Hard? | On hammering |
|---|---|---|---|
| Copper | Yes | Yes | Flattens (malleable) |
| Aluminium | Yes | Yes | Flattens (malleable) |
| Iron nail | Yes | Yes | Flattens (malleable) |
| Coal | No | Not as hard as metals | Breaks (brittle) |
| Sulfur | No | Soft | Breaks (brittle) |
| Wood | No | Not as hard as metals | Neither flattens nor breaks |
Malleability is the property of being beaten into thin sheets. Most metals are malleable; gold and silver are the most malleable.
Not every metal fits the usual pattern
-
Very soft metals
- Sodium and potassium can be cut with a knife
-
A liquid metal
- Mercury is a liquid at room temperature
- It was used in older thermometers
-
Most other metals
- Hard, solid and lustrous
- Examples: iron, copper, aluminium
Key takeaways: metals usually show metallic lustre and are hard. Most metals are malleable and can be beaten into sheets, gold and silver most of all. Coal and sulfur are brittle and break, while wood is neither malleable nor brittle. Sodium and potassium are soft metals and mercury is a liquid metal, so judge a material by several properties, not one.