- Foundation
- About 15 min
- 5 practice questions
Ductility, sonority and conduction of heat and electricity
Explain ductility and sonority with examples, and show how metals conduct heat and electricity better than non-metals and materials like wood and plastic.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain ductility and sonority and give examples of their uses.
- Describe a test showing that metals conduct heat better than wood.
- Explain why tools and cooking pots use metals together with insulating handles.
Metals do more than shine and flatten. They can be pulled into wires, they ring when struck, and they let heat and electricity pass through them easily. These properties explain why metals are chosen for electric wires, bells, cooking pots and much more.
Ductility
Copper and aluminium wires carry electricity in our homes. Bangles, chains and earrings are often made from metal wire, and the strings of a sitar, veena or guitar are metal wires. The property by which a material can be drawn into wires is called ductility. It is mainly a property of metals. Gold is so ductile that a single gram can be drawn into a wire about 2 kilometres long. Coal and sulfur cannot be made into wires; they are not ductile.
Steel, a mixture of iron with a little carbon, can be made into strong wire ropes. These ropes hold up suspension bridges and lift heavy loads in cranes.
Sonority
Drop a steel spoon or a coin on the floor and it rings. Drop a piece of coal or wood and you hear only a dull thud. The property of producing a ringing sound when struck is called sonority; metals are sonorous. That is why school bells, temple bells and ghungroos are made of metal. A visually impaired person tapping a cane can even tell metal from wood by the sound.
Conduction of heat
Put a metal spoon and a wooden spoon of about the same size into a tumbler of hot water at the same time (with an adult handling the hot water). After a few minutes, carefully touch the top ends. The metal spoon feels much hotter. Heat has travelled along the metal from the hot end to the cool end. Transfer of heat through a material from one point to another is called conduction; materials that conduct heat well are conductors of heat.
Metal spoon versus wooden spoon in hot water
-
Metal spoon
- Top end becomes hot
- Good conductor of heat
- Used for cooking pots
-
Wooden spoon
- Top end stays cool
- Poor conductor of heat
- Used for pot handles
Worked example 1: designing an electric kettle
Choose materials for the inner pot and the handle of a kettle, from steel, aluminium, glass, stone, rubber and wood. Working: the inner pot must pass heat quickly to the water and must not crack or break when heated and knocked, so a metal that conducts heat well, such as steel or aluminium, is best. Glass and stone conduct heat poorly and can crack. The handle must stay cool enough to hold, so it should be a poor conductor of heat, such as wood or a heat-resistant plastic; rubber could soften near the hot body. Each part uses the property its job needs.
Conduction of electricity
Use the cell-and-lamp tester from the electricity chapter. Aluminium foil, an iron nail and a copper wire make the lamp glow. Sulfur, coal, dry wood, stone, a rubber eraser and a nylon rope do not. The pattern: the materials that conduct are metals. Metals are good conductors of electricity; the others here are poor conductors.
Metals are generally lustrous, hard, malleable, ductile, sonorous and good conductors of heat and electricity.
Worked example 2: the electrician's tools
An electrician uses a screwdriver with a plastic handle and wears rubber gloves and rubber-soled shoes. Explain. Working: the metal tip of the screwdriver must touch screws and terminals, which may carry current. Plastic and rubber are poor conductors of electricity, so the handle, gloves and shoes stop current from passing through the electrician's body to the ground. Each part of the tool uses the right property: a conductor where contact is needed, an insulator where hands touch.
| Property | Meaning | An everyday use |
|---|---|---|
| Ductility | Can be drawn into wires | Electric wires, sitar strings, tea strainers |
| Sonority | Rings when struck | Bells, ghungroos |
| Conduction of heat | Lets heat pass through | Cooking pots, tawas |
| Conduction of electricity | Lets current pass through | Wires, switch contacts, plug pins |
Key takeaways: ductile materials can be drawn into wires, and gold is extremely ductile. Sonorous materials ring when struck, which is why bells are metal. Metals conduct heat and electricity well, so they are used for pots and wires, while wood, plastic and rubber, which conduct poorly, are used for handles, covers and gloves.
Check your understanding
-
1. The strings of a sitar are made of metal wire. Which property of metals makes this possible?
- Ductility
- Brittleness
- Malleability
- Lustre
Show answer
Answer: A. Ductility is the property of being drawn into wires.
-
2. School bells are made of metal because metals are:
- Brittle
- Poor conductors of heat
- Non-lustrous
- Sonorous
Show answer
Answer: D. Metals produce a ringing sound when struck; this property is sonority.
-
3. A metal spoon and a wooden spoon stand in the same hot water for the same time. Which statement is correct?
- The wooden spoon gets hotter because wood is a good conductor
- The metal spoon's top end gets hotter because metal is a good conductor of heat
- Both get equally hot
- Neither gets hot because water does not carry heat
Show answer
Answer: B. Heat travels along the metal by conduction much better than along wood, so the metal spoon's top end becomes hotter.
-
4. Why are cooking pans usually made of metal with wooden or plastic handles?
- Metal passes heat to the food; the handle material conducts heat poorly and stays cool to hold
- Wood conducts heat better than metal
- Metal handles would melt
- Plastic makes food cook faster
Show answer
Answer: A. The body must conduct heat well (metal), while the handle must be a poor conductor (wood or heat-resistant plastic) so it is safe to hold.
-
5. Which of these does NOT make the lamp of a conduction tester glow?
- Aluminium foil
- An iron nail
- A nylon rope
- A copper wire
Show answer
Answer: C. Nylon is a poor conductor of electricity. Aluminium, iron and copper are metals and conduct electricity.
Sign in to keep track of the lessons you finish.