• Foundation
  • About 15 min
  • 5 practice questions

Lustre, hardness and malleability

Describe metallic lustre and hardness, explain malleability and brittleness with examples, and note the exceptions such as soft sodium and liquid mercury.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Recognise metallic lustre and compare the hardness of metals and other materials.
  • Explain malleability and brittleness, and give everyday examples.
  • Name metals that are exceptions to the usual rules.

Watch an ironsmith at work: an iron block is heated in a coal furnace until it glows red, then beaten with a hammer into the flat blade of an axe, a tawa or a khurpi. A lump of coal treated the same way would simply shatter. Why do some materials flatten while others break? The answer lies in the properties of materials, which also help us sort them into metals and non-metals.

Lustre and hardness

Freshly cut or cleaned pieces of copper, aluminium and iron shine. This shine is called metallic lustre. They are also hard. Coal, sulfur (gandhak) and wood are dull (non-lustrous) and not as hard. Metals often look dull when old because their surface has reacted with air; rubbing with sandpaper shows the lustre underneath.

Malleability and brittleness

When a piece of copper, aluminium or an iron nail is hammered on a hard surface, it flattens instead of breaking. The property by which a material can be beaten into thin sheets is called malleability. Most metals are malleable. Gold and silver are the most malleable: silver can be beaten into the very thin silver foil (varq) put on some sweets, and aluminium into the foil used to wrap food.

A lump of coal or sulfur breaks into pieces when hammered. Such materials are brittle. Wood behaves differently again: it neither flattens into a sheet nor shatters, so it is neither malleable nor brittle.

Comparing materials (hammering to be done only with an adult present)
MaterialLustrous?Hard?On hammering
CopperYesYesFlattens (malleable)
AluminiumYesYesFlattens (malleable)
Iron nailYesYesFlattens (malleable)
CoalNoNot as hard as metalsBreaks (brittle)
SulfurNoSoftBreaks (brittle)
WoodNoNot as hard as metalsNeither flattens nor breaks

Malleability is the property of being beaten into thin sheets. Most metals are malleable; gold and silver are the most malleable.

Exceptions

Not every metal fits the usual pattern

  • Very soft metals
    • Sodium and potassium can be cut with a knife
  • A liquid metal
    • Mercury is a liquid at room temperature
    • It was used in older thermometers
  • Most other metals
    • Hard, solid and lustrous
    • Examples: iron, copper, aluminium

Worked example 1: why heat the iron first?

Why does the ironsmith heat iron until red hot before hammering it? Working: iron is malleable even when cold, but it is very hard, so shaping it cold needs huge force and takes a long time. Heating makes the iron softer, so each hammer blow changes its shape more. The ironsmith uses the property of malleability, made easier by heat, to turn a block into a tool. Wooden handles are then fitted, because wood is easy to shape and does not get as hot.

Worked example 2: classifying from observations

Ananya tests an unknown grey solid. It is shiny when scratched, and it flattens when hammered gently. Another solid, yellow and dull, crumbles when hammered. Working: the first solid shows lustre and malleability, so it is most likely a metal. The second is dull and brittle, which is typical of a non-metal such as sulfur. One property alone can mislead, so we look at several properties together.

From history

The people of the Harappan civilisation made utensils and jewellery from copper and gold, but there is hardly any evidence that they used iron. Iron came into everyday use later and, being strong, made far better ploughs and tools, which helped farming and the growth of settlements. One reason copper was probably used earlier is that it can sometimes be found as the pure metal and is easier to extract than iron.

Key takeaways: metals usually show metallic lustre and are hard. Most metals are malleable and can be beaten into sheets, gold and silver most of all. Coal and sulfur are brittle and break, while wood is neither malleable nor brittle. Sodium and potassium are soft metals and mercury is a liquid metal, so judge a material by several properties, not one.

Check your understanding

  1. 1. The property of a material by which it can be beaten into thin sheets is called:

    1. Ductility
    2. Malleability
    3. Sonority
    4. Brittleness
    Show answer

    Answer: B. Being beaten into sheets is malleability. Ductility is being drawn into wires; sonority is ringing; brittleness is breaking.

  2. 2. Which material breaks into pieces when hammered?

    1. An iron nail
    2. A piece of copper
    3. A piece of aluminium
    4. A lump of sulfur
    Show answer

    Answer: D. Sulfur is brittle. Iron, copper and aluminium are metals and flatten when hammered.

  3. 3. Which metal is a liquid at room temperature?

    1. Mercury
    2. Sodium
    3. Iron
    4. Gold
    Show answer

    Answer: A. Mercury is the metal that is liquid at room temperature; it was used in older thermometers.

  4. 4. A block of wood is hammered. What happens?

    1. It flattens into a thin sheet
    2. It shatters like coal
    3. It neither flattens into a sheet nor breaks into pieces
    4. It starts to shine
    Show answer

    Answer: C. Wood is neither malleable nor brittle, so it neither becomes a sheet nor shatters.

  5. 5. Which two metals are the most malleable?

    1. Iron and copper
    2. Sodium and potassium
    3. Gold and silver
    4. Mercury and aluminium
    Show answer

    Answer: C. Gold and silver are the most malleable metals and can be beaten into extremely thin foils.

Privacy · Terms · Refunds · Delivery