• Foundation
  • About 15 min
  • 5 practice questions

The heating effect of electric current

Explain why a wire gets hot when current flows, name the factors that decide how much heat is produced, and describe uses and dangers of the heating effect.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the heating effect of current using the idea of resistance.
  • List the factors on which the heat produced in a wire depends.
  • Name appliances that use the heating effect and safety rules that prevent overheating.

When you made an electromagnet, the wire grew warm. Burning wood or gas gives heat, but how does an electric kettle get hot with no flame? The answer is another effect of current.

Why a wire heats up

A current faces some opposition, called resistance, as it flows through a conductor. Different materials offer different resistance: nichrome (an alloy) has much higher resistance than a copper wire of the same length and thickness. Because of resistance, some electrical energy is changed into heat energy, and the wire warms up. This is the heating effect of electric current.

When an electric current passes through a conductor, the conductor gets heated: this is the heating effect of electric current.

A safe demonstration

With a teacher supervising, a short piece of thin nichrome wire is fixed between two nails on cardboard and connected to a cell through a switch. Before switching on, the wire feels cool. After current flows for about half a minute and is switched off, a quick touch shows it is warm. Never hold the wire, and never try this with mains electricity.

What decides how much heat?

Heat produced in a wire depends on

  • Current
    • More current gives more heat
    • Two cells heat the wire more than one in the same time
  • Material
    • Nichrome heats more than copper of the same size
  • Thickness and length
    • These change the wire's resistance
  • Time
    • The longer the current flows, the more heat is produced
Change one factor at a time to test each.

Worked example 1: one cell or two?

The same nichrome wire is connected for 30 seconds, first to one cell and then to a battery of two cells. Which time does it get hotter? Working: two cells give a larger current; heat produced increases with current; time and wire are the same. So it gets hotter with two cells. This is a fair test because only the number of cells changed.

Heating appliances

A filament lamp glows because its thin filament is heated white-hot by the current. Room heaters, electric stoves, kettles, irons, immersion rods and hair dryers all contain a heating element: a coil or rod of high-resistance wire such as nichrome. In some, the element can be seen glowing red hot. In industry, electric furnaces reach very high temperatures and are used to melt and recycle scrap steel.

Copper or nichrome?
JobBetter wireReason
Heating element of an ironNichromeHigher resistance, so more heat for the same current
Wires that carry current to appliancesCopperLow resistance, so little energy is wasted as heat

Worked example 2: choosing a heating wire

Why is nichrome, not copper, used in a heater? Working: we want as much heat as possible from the current. Heat comes from resistance, and nichrome has higher resistance than copper of the same size. So for a given current, nichrome produces more heat. Copper is kept for connecting wires, where heating is unwanted.

When heating is a problem

The heating effect can waste energy, for example in long transmission wires. If too much current flows, plugs, sockets and wires overheat; plastic parts can melt and fires can start. Household circuits have safety devices to cut off dangerous currents, and wires, plugs and sockets must be rated for the current they carry.

  • Do not connect many high-power appliances to one socket.
  • Use wires, plugs and sockets of the correct rating.
  • Switch off and unplug heaters, irons and immersion rods after use.

Key takeaways: resistance turns some electrical energy into heat, so current-carrying wires get warm. Heat produced increases with current and time and depends on the wire's material, thickness and length. Heating elements use high-resistance nichrome; connecting wires use low-resistance copper. Overheating can melt fittings and start fires, so use correctly rated wiring and safety devices.

Check your understanding

  1. 1. Why does a nichrome wire get warm when current flows through it?

    1. It produces magnetism that turns into fire.
    2. Nichrome contains burning fuel.
    3. Current makes the wire absorb sunlight.
    4. Its resistance converts some electrical energy into heat.
    Show answer

    Answer: D. Every conductor offers some resistance; nichrome offers a lot. Resistance changes part of the electrical energy into heat.

  2. 2. Which appliance does NOT work mainly on the heating effect of current?

    1. Electric kettle
    2. Electric iron
    3. Electric bell
    4. Immersion rod
    Show answer

    Answer: C. An electric bell uses an electromagnet (magnetic effect). Kettles, irons and immersion rods use heating elements.

  3. 3. A wire is connected to one cell for 30 seconds, then to two cells for 30 seconds. What happens?

    1. It gets hotter with one cell.
    2. It heats equally in both cases.
    3. It gets hotter with two cells because the current is larger.
    4. It does not heat in either case.
    Show answer

    Answer: C. Two cells drive a larger current through the same wire, and more current produces more heat in the same time.

  4. 4. Why are connecting wires usually made of copper?

    1. Copper has the highest resistance of all metals.
    2. Copper has low resistance, so little energy is wasted as heat.
    3. Copper is magnetic.
    4. Copper glows brightly.
    Show answer

    Answer: B. In connecting wires we want as little heating as possible, so a low-resistance metal like copper is used. High-resistance nichrome is used where heat is wanted.

  5. 5. What is a danger of connecting too many heaters to one socket?

    1. The heaters will become magnets.
    2. The room will become colder.
    3. The current will stop completely and nothing else happens.
    4. The large current can overheat the socket and wires and may cause a fire.
    Show answer

    Answer: D. More current produces more heat in the socket and wiring. Plastic parts can melt and fires can start, which is why wiring must be correctly rated.

Privacy · Terms · Refunds · Delivery