• Foundation
  • About 15 min
  • 5 practice questions

Pressure: force spread over an area

Define pressure as force per unit area, calculate it in pascals, and explain everyday designs that increase or reduce pressure.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define pressure and state its SI unit.
  • Calculate pressure from force and area, and compare pressures.
  • Explain why sharp tools cut easily and broad straps feel comfortable.

Two school bags weigh the same. One has narrow straps and hurts the shoulders; the other has broad straps and feels fine. The force (the weight of the bag) is the same, so what is different? The area over which the force acts.

Defining pressure

The force acting perpendicular (straight) on a surface, divided by the area over which it acts, is called pressure. Narrow straps put the whole weight on a small area of the shoulder, giving high pressure; broad straps spread it over a larger area, giving lower pressure.

Pressure = Force ÷ Area. The SI unit is newton per square metre (N/m²), also called the pascal (Pa).

Same force, different area

  • Small area
    • High pressure
    • Narrow strap digs into the shoulder
    • Sharp knife edge cuts easily
    • Nail point enters wood easily
  • Large area
    • Low pressure
    • Broad strap feels comfortable
    • Blunt edge does not cut
    • Nail head does not enter wood

Worked example 1: a simple calculation

A force of 300 N acts on an area of 2 m². Find the pressure. Working: pressure = force ÷ area = 300 N ÷ 2 m² = 150 N/m² = 150 Pa. Check: 150 × 2 = 300.

Worked example 2: standing and lying on sand

A boy weighs 400 N. Standing, his two feet cover 0.04 m² in total; lying flat, his body covers 0.5 m². Find the pressure on the sand in each case and say where he sinks more. Working: standing, pressure = 400 N ÷ 0.04 m² = 10,000 Pa. Lying, pressure = 400 N ÷ 0.5 m² = 800 Pa. Check: 10,000 × 0.04 = 400 and 800 × 0.5 = 400. Standing gives much higher pressure, so he sinks more when standing.

Pressure in daily life

Increasing or reducing pressure on purpose
ExampleAreaPressureWhy
Sharp edge of a knifeVery smallHighCuts easily
Pointed end of a nailVery smallHighEnters wood easily
Broad bag straps and broad bucket handlesLargerLowerComfortable to carry
Round cloth pad under a pot carried on the headLargerLowerSpreads the load
Wide tyres on tractorsLargerLowerDo not sink into soft mud

Try these only with an adult: pressing a nail into soft wood by its head and then by its point, or cutting an apple with the sharp and the blunt edge of a knife. The force from your hand is similar, but the small area gives a much higher pressure.

Solving a pressure problem

  1. Find the force Often the weight, in newtons
  2. Find the area In square metres; add up all contact areas
  3. Divide Pressure = force ÷ area
  4. Give the unit Pa or N/m², and check by multiplying back

Worked example 3: comparing two boxes

The same 120 N box rests first on a face of area 0.5 m², then on a face of area 0.2 m². Which face gives more pressure? Working: 120 ÷ 0.5 = 240 Pa; 120 ÷ 0.2 = 600 Pa. The smaller face gives more pressure: 600 Pa compared with 240 Pa.

Key takeaways: pressure is force per unit area: pressure = force ÷ area, measured in pascals (N/m²). For the same force, a smaller area means higher pressure and a larger area means lower pressure. Sharp tools and nails use small areas to increase pressure; straps, handles, head pads and wide tyres use large areas to reduce it.

Check your understanding

  1. 1. What is the SI unit of pressure?

    1. Pascal (N/m²)
    2. Newton
    3. Kilogram
    4. Metre
    Show answer

    Answer: A. Pressure is force per unit area, so its unit is newton per square metre, called the pascal (Pa). The newton alone is the unit of force.

  2. 2. A force of 500 N acts on an area of 2.5 m². What is the pressure?

    1. 1250 Pa
    2. 200 Pa
    3. 502.5 Pa
    4. 125 Pa
    Show answer

    Answer: B. Pressure = force ÷ area = 500 N ÷ 2.5 m² = 200 Pa. Check: 200 × 2.5 = 500.

  3. 3. Why does a sharp knife cut better than a blunt one?

    1. Its thin edge has a small area, so the same force gives a higher pressure.
    2. It is heavier.
    3. Its edge has a larger area.
    4. It reduces the force applied.
    Show answer

    Answer: A. Pressure = force ÷ area. A sharp edge touches over a tiny area, so pressure is high and it cuts easily.

  4. 4. Why do people place a round cloth pad under a heavy pot carried on the head?

    1. To increase the pressure on the head
    2. To make the pot lighter
    3. To increase the weight of the pot
    4. To spread the weight over a larger area and reduce pressure
    Show answer

    Answer: D. The pad increases the contact area. The same weight over a larger area gives lower pressure, which is more comfortable.

  5. 5. A 600 N load rests on a base of 0.3 m². What pressure does it exert?

    1. 180 Pa
    2. 200 Pa
    3. 2000 Pa
    4. 600.3 Pa
    Show answer

    Answer: C. Pressure = 600 N ÷ 0.3 m² = 2000 Pa. Check: 2000 × 0.3 = 600.

Sign in to keep track of the lessons you finish.

Next lesson → Pressure in liquids

Privacy · Terms · Refunds · Delivery