Pressure = Force ÷ Area. The SI unit is newton per square metre (N/m²), also called the pascal (Pa).
Same force, different area
-
Small area
- High pressure
- Narrow strap digs into the shoulder
- Sharp knife edge cuts easily
- Nail point enters wood easily
-
Large area
- Low pressure
- Broad strap feels comfortable
- Blunt edge does not cut
- Nail head does not enter wood
| Example | Area | Pressure | Why |
|---|---|---|---|
| Sharp edge of a knife | Very small | High | Cuts easily |
| Pointed end of a nail | Very small | High | Enters wood easily |
| Broad bag straps and broad bucket handles | Larger | Lower | Comfortable to carry |
| Round cloth pad under a pot carried on the head | Larger | Lower | Spreads the load |
| Wide tyres on tractors | Larger | Lower | Do not sink into soft mud |
Solving a pressure problem
- Find the force Often the weight, in newtons
- Find the area In square metres; add up all contact areas
- Divide Pressure = force ÷ area
- Give the unit Pa or N/m², and check by multiplying back
Key takeaways: pressure is force per unit area: pressure = force ÷ area, measured in pascals (N/m²). For the same force, a smaller area means higher pressure and a larger area means lower pressure. Sharp tools and nails use small areas to increase pressure; straps, handles, head pads and wide tyres use large areas to reduce it.