- Foundation
- About 16 min
- 5 practice questions
Harappan cities, stupas and rock-cut caves
Describe what architecture means, explain the planning of Harappan cities such as Mohenjo-daro and Dholavira, and describe the stupas of Sanchi and Bharhut and the rock-cut caves of Udayagiri-Khandagiri and Ellora.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what architecture is and describe the town planning of Mohenjo-daro and Dholavira.
- Describe the parts of a stupa and how it was worshipped, using Sanchi and Bharhut.
- Explain what rock-cut architecture is and describe the Udayagiri-Khandagiri and Ellora caves.
Architecture is the art and technique of designing and constructing buildings, combining usefulness with beauty. India has excelled in it for several thousand years, in styles that changed over time and differ from region to region. In this course we take a journey through some representative buildings, grouped by type, starting with the oldest.
The beginnings: Harappan cities
Harappan architecture is the earliest known tradition of town planning in the subcontinent. Its cities were carefully laid out, followed standard ideas, and gave great importance to drainage, water management and civic organisation. Most were built of bricks, because they stood on alluvial plains where clay was plentiful.
Mohenjo-daro (in present-day Sindh, Pakistan) had wide streets and narrow lanes, roughly aligned to the cardinal directions. Almost every home had a bathing area, and used water was carried out of the city by an efficient network of drains. The plan of a large house suggests that servants lived downstairs while the owners lived upstairs, away from street dust and noise.
Dholavira, in the Rann of Kachchh (Gujarat), is famous for its precise planning, fortified areas and large reservoirs. Unlike most Harappan cities, it used stone extensively, because stone was available locally. Its highest, most fortified area, called the 'Castle', had a guarded eastern entrance of smooth stone blocks.
Worked example 1: explaining a cause and effect
Why were Mohenjo-daro's houses mostly of brick, but Dholavira's largely of stone? Step 1: Builders use what is close at hand. Step 2: Mohenjo-daro lay on an alluvial plain, rich in clay for bricks. Step 3: Dholavira, in Kachchh, had stone nearby. Conclusion: local materials shaped each city's architecture - a pattern we will see again and again.
Stupas
From the 4th or 3rd century BCE, with the rise of Buddhism, new forms of architecture appeared. Thousands of stupas - dome-shaped structures housing relics of the Buddha or revered monks - were built in brick or stone. Larger stupas became ritual centres with railings, gateways and carved panels telling the story of the Buddha's life. At this early stage the Buddha was shown through symbols - footprints, the wheel of dharma or the stupa itself - not in human form. Stupas were also built in Jainism, and the form spread across India and beyond.
The main stupa at Sanchi in Madhya Pradesh, first commissioned or supported by Ashoka, represents the earliest phase of monumental stone religious architecture in India. A worshipper entered through one of its massive carved gateways (toranas), showing scenes of city and village life, and walked around the stupa inside an enclosure of railings (vedika). At Bharhut, also in Madhya Pradesh, carved railings show people worshipping a stupa and record the names of donors.
Parts of a great stupa such as Sanchi
-
Dome
- Houses relics
- Brick or stone
-
Toranas
- Massive ornamental gateways
- Carved with scenes of life
-
Vedika
- Enclosure of railings
- Path for walking around
-
Carved panels
- Stories of the Buddha
- Donors' names (Bharhut)
Rock-cut architecture
In rock-cut architecture, builders carve directly into a hillside to create caves for worship, living or assembly. It was efficient and durable, and complexes often grew over centuries. The Udayagiri-Khandagiri caves near Bhubaneswar in Odisha, begun in the 2nd century BCE under royal patronage, are among India's first; most were homes for Jain monks, and one holds King Kharavela's famous inscription.
Maharashtra has the magnificent caves of Ajanta and Ellora. At Ellora, many thousands of tonnes of rock were chipped away to leave the colossal monolithic Kailasha Temple, along with Buddhist, Hindu and Jain caves. Cave no. 10 at Ellora has a huge seated Buddha in a teaching pose, leaning against a stupa. Its arched roof imitates timber beams found in city buildings, and in its aisle monks walked around the stupa - the custom of pradakshina (going around clockwise), which continued in later temples.
Rock-cut architecture is made by removing rock rather than adding material: the whole structure - pillars, roof, statues - is carved out of a single hillside.
Worked example 2: comparing building methods
Compare a stupa with a rock-cut cave. A stupa is built up: bricks or stones are laid to form a dome. A rock-cut cave is carved down: rock is removed, so no piece can be added back if a mistake is made. Shared idea: both provide a path for pradakshina. Lesson: the method differs, but the religious practice links them.
| Site | Type | Place | Notable feature |
|---|---|---|---|
| Mohenjo-daro | Harappan city | Sindh, Pakistan | Grid of streets, drains, bathing areas |
| Dholavira | Harappan city | Rann of Kachchh, Gujarat | Stone construction, reservoirs, 'Castle' |
| Sanchi | Stupa | Madhya Pradesh | Toranas and railings; linked with Ashoka |
| Udayagiri-Khandagiri | Rock-cut caves | Near Bhubaneswar, Odisha | Jain monks' dwellings; Kharavela inscription |
| Ellora | Rock-cut caves | Maharashtra | Kailasha Temple; Cave 10 with seated Buddha |
Key takeaways: Harappan cities show the earliest town planning, with drains and baths, built of brick or, at Dholavira, of local stone. Buddhist and Jain stupas such as Sanchi have toranas and railings for walking around the relic mound. Rock-cut complexes like Udayagiri-Khandagiri and Ellora were carved out of hills; Ellora's Cave 10 shows pradakshina around a stupa.
Check your understanding
-
1. Which feature of Harappan cities shows their concern for civic organisation?
- Tall temple towers
- An efficient network of drains carrying used water out of the city
- Painted ceilings
- Marble domes
Show answer
Answer: B. Harappan towns are noted for drainage and water management: almost every home at Mohenjo-daro had a bathing area, and drains took used water out of the city.
-
2. Why did Dholavira use stone extensively, unlike most Harappan cities?
- Stone was locally available
- Bricks were banned
- Stone was imported from Egypt
- It was built in the 20th century
Show answer
Answer: A. Builders used local materials. Dholavira, in the Rann of Kachchh, had stone nearby, while most Harappan cities on alluvial plains used clay bricks.
-
3. In early Buddhist art at Sanchi and Bharhut, how was the Buddha shown?
- As a large statue in every panel
- As a king on a throne
- Through symbols such as footprints, the wheel of dharma or the stupa
- He was never shown in any form
Show answer
Answer: C. At this early stage the Buddha was represented symbolically rather than in human form.
-
4. What were the Udayagiri-Khandagiri caves mainly used for?
- Royal palaces
- Dwellings for Jain monks
- Storing grain
- Harappan reservoirs
Show answer
Answer: B. Carved from the 2nd century BCE near Bhubaneswar, most of these caves served as homes for Jain monks.
-
5. What is pradakshina?
- A type of stone gateway
- The roof of a cave
- A kind of brick
- Walking around a sacred object in a clockwise direction
Show answer
Answer: D. Pradakshina means going around clockwise. Monks walked around the stupa in the aisle of Ellora's Cave 10, and the custom continued in later temples.
Sign in to keep track of the lessons you finish.